User’ s Guide Version 3.
MASTERFORM by LabelmasterTM for UPS Domestic Edition User’ s Guide Version 3.0 Published by Labelmaster Software Copyright © 2002 American Labelmark Company 400 East Pine Street, Suite 210 Seattle, WA 98122 Toll free: 1-800-578-4955 Local: 1-206-256-0889 Fax: 1-206-443-0529 http://www.labelmaster.
The electronic publication “MASTERFORM” is subject to the terms and conditions of the License Agreement for Labelmaster Software, an American Labelmark Company, products. It is sold with the understanding that the publisher is not engaged in rendering legal, accounting, or other professional services. It is the user’ s responsibility to determine the applicability of the regulatory information included with this program and to comply with all legal requirements, regulations, laws, and codes.
Support and Resources ............ 29 Technical Support and Contact Information ...... 31 Chemical table resources ............................... 34 Managing Templates and Addresses ................. 36 Getting Started Using MASTERFORM ......................... 39 Turning off the Labels Required field warning ..... 60 Pre-printing forms for future use ..................... 61 Features and Options .............. 63 Writing notes inside MASTERFORM ...................
Screen 6: Ground or Air Shipment .................... 90 Specify Labels Required, Exemption Packaging Numbers, and Subsidiary Risk ..... 90 Quantity and Unit of Measure Limitations .... 90 Add up to three materials ......................... 91 Screen 7: Print Preview ................................. 91 Screen 8: Print and Save Shipment Template .... 93 Printing the Hazardous Materials Shipping Paper ......... 95 Printing the certification ...............................
Installation and Setup 10 11
Introduction to MASTERFORM MASTERFORM for UPS is a “smart”form-filling wizard created to help you ship hazardous materials (hazmat) with United Parcel Service (UPS). It prints two forms: the UPS Hazardous Materials Shipping Paper (on laser or tractor printer) and the Shipper’ s Certification end-of-day log. It also saves your shipment information as templates that you can use again and again. MASTERFORM uses a chemical table provided by UPS and will not allow you to ship outside of UPS restrictions.
• Provides chemical table data directly from UPS, updated throughout the length of your license • Make printing easier by allowing the movement of individual fields in any direction • Allows proper shipping name edits for flexibility and accuracy • Reminds shippers to check the Labels Required field to prevent returned packages Installing MASTERFORM for UPS Domestic Edition 1. To begin installation of MASTERFORM for UPS, place the CD in your CD-ROM drive. The main QuickStart menu will appear. 2.
Installing 49 CFR regulations and TSI Hazmat Training Structure of MASTERFORM You have the option of installing a free hazmat training program from the Transportation Safety Institute (TSI). The Q&A format links to the relevant text of 49 CFR so you can immediately check your answers against the regulations. Step 2.
If you want to add your own personalized name and password, press the TAB key at this point instead of clicking Next. This will open the password list. See Security: Defining user names and passwords for more information. NOTE: In MASTERFORM v3.0.2 and later, the Security Authorization Screen is turned off by default when you intially install. If you wish to activate the authorization screen for security purposes, enter Setup from the main window and uncheck the box for Bypass Authorization Screen.
Sending your MASTERFORM shipments to UPS OnLine® WorldShip® Purging WorldShip® hazmat entries will not affect your templates or certification records in MASTERFORM. Step 1: Install the software MASTERFORM for UPS is now integrated with United Parcel Service’ s WorldShip® software so that you can instantly send your hazmat shipping paper data directly to WorldShip®. You must have MASTERFORM and WorldShip® installed on the same computer, and you must make sure your System DSN connection is set up properly.
2. In the Control Panel window, double-click Data Sources (ODBC) as shown in Figure 4. (In Windows 2000 and XP this can be found one level deeper in a folder called Administrative Tools.) Figure 5: Click Add to create a new data source for HAZMAT. Figure 4: Double-click Data Sources (ODBC) inside the Control Panel. This will open the ODBC Data Source Administrator. Inside the ODBC Data Source Administrator, click the System DSN tab (see Figure 5). 3. Click Add... as shown in Figure 5. 4.
5. In the ODBC Microsoft Access Setup, type HAZMAT as the Data Source Name. This must be in all capital letters, exactly as shown here. You can enter a description if you like, such as “My UPS WorldShip Connection.” (See Figure 7.) 6. Under Database, click Select to specify which database will be the data source. Browse to your C:\ drive to find the UPSExport folder. Inside the UPSExport folder you will find the file ExportWS.mdb. This file is your data source and it is installed by MASTERFORM.
Step 3: Send hazmat shipping paper data to WorldShip® In Step 2 you established a connection between MASTERFORM and WorldShip®. WorldShip® is now ready to receive your MASTERFORM for UPS hazmat shipping paper data. Every time you print a shipping paper in MASTERFORM, the material information is sent automatically to WorldShip®.
Support and Resources 28 29
Technical Support and Contact Information This manual contains a chapter called Troubleshooting that may have the answer to your question. Review the topics under Troubleshooting and our support web site for quick answers. If you need to call or e-mail Labelmaster Technical Support, please be prepared to reference the product name and version number you are using. The version number can be found on the main MASTERFORM menu when you first open the program.
Other Contacts: Lexmark printer support: http://www.lexmark.com or 1-800-LEXMARK Okidata printer support: http://www.okidata.com or 1-800-OKIDATA UPS hazmat hotline: 1-800-554-9964 UPS OnLine WorldShip help: 1-888-553-1118 UPS hazmat guidelines: http://www.ups.com/ using/services/accs/hzm-guide.html MASTERFORM home page: http://www.labelmaster.com/masterform Office of Hazardous Materials Safety: http://www.text-trieve.com/dotrspa ...or... http://hazmat.dot.gov DOT Contact: U.S.
Chemical table resources If you have a problem with the chemical table data in MASTERFORM, we will make every effort to correct the issue and send you a new table immediately. MASTERFORM for UPS uses chemical table data supplied by United Parcel Service. The table in your MASTERFORM should match whatever table was most recently published by UPS; however, there may be occasions where UPS publishes changes immediately after a MASTERFORM update, rendering the software inaccurate.
Managing Templates and Addresses To keep your template and address book data safe through repeated updates, you should familiarize yourself with the databases that store this information. Template and address databases are found inside your MASTERFORM installation directory. You must know where MASTERFORM is installed if you want to work with these databases. If you aren’ t sure, search your computer for the file name “masterform.mdb.”The location of this file should be your installation directory.
Getting Started Using MASTERFORM 38 39
MASTERFORM Setup MASTERFORM needs to know your UPS account number, log book number, and option preferences before you begin shipping. Click the Setup icon on the MASTERFORM main menu to set up this information. Figure 11 shows the Setup screen. Figure 11: Inside Setup you can enter UPS account information, choose options, and configure reports. SETUP ACCOUNTS 1. In the Account column, enter your UPS account number.
2) In the Log # column, enter your UPS log book number. Each UPS account number must have a unique corresponding log book number. These numbers are assigned to you by Labelmaster Software. If you need a number, call 1-800-578-4955. 3) The Sequence # column can be left alone. See How log book numbers work. We recommend that you always leave this option enabled (checked). This option selects the Save as Template check box in the last screen of the form-fill wizard.
Shipping under multiple accounts MASTERFORM can organize shipping papers and certifications under multiple UPS accounts. Enter all the UPS account numbers you use, with their corresponding log numbers, into Setup. The Setup list of account numbers ties Shipping Papers to Certifications so that you can ship under multiple accounts. The sequence number increments automatically, so you can leave it as zero to begin with.
Security: Defining user names and passwords MASTERFORM can store an unlimited number of user names and their corresponding passwords. Password protection helps keep unauthorized personnel from using MASTERFORM to ship hazmat. To add users to the list: Figure 13: When you’ re ready to print the shipper’ s certification, specify the appropriate account number in the Review Packages screen. 1. Make sure that you do not have the Bypass Authorization Screen option selected in Setup.
6. Select the check box under Supervisor if you want this user to have access to this Name and Password list. Anyone with Supervisor status will be able to enter this list by pressing the TAB key. Those without Supervisor status will be forced into the next screen and will not be allowed to view the Name and Password list. How log book numbers work The log book number is the number by which UPS organizes your shipping bill.
The sequence number increments once per day according to your computer’ s system date. If your system date has been tampered with, your MASTERFORM sequence number can be thrown off. You can change the Sequence number manually inside MASTERFORM Setup if you need to. Just put your cursor in the Sequence number field and type over the existing number. Be sure to click Done to exit Setup and save your changes.
You are not required to save a template, however. It is an option available if you would like to save your information for reuse later. What is a template? A template is a set of information needed to complete one form. It is an electronic version of a shipping paper that you can reenter, edit, and reprint at any time. When should I use templates? Use templates for shipment information that you use often. You can save time and effort by keeping this information in a ready-to-use format.
Working with templates Reenter a saved template by selecting the template name from the drop-down list in the Shipment Template screen and clicking Next. The first screen, Shipment Template, is where you begin a new form. It is also where you can select a previously saved template for modification now. (If you are beginning a brand new shipment, click Next while the Template name field is blank or reads .
Deleting templates On the first screen, select the template name into the Template Name field and click Delete Template. The Delete Template button is found in the Shipment Template screen (see Figure 15). Select the template name from the drop-down list in the Shipment Template screen so that it appears in the Template Name field. Then click Delete Template. Deleting templates will not affect what appears on your certification.
Using an Exemption Packaging number Confirming the labels required for your package The Exemption Packaging field is found on the Ground/Air Shipment screen where your mass or capacity is entered. This field allows you to select or type an exemption number to appear on your shipping paper. A brief list of common exemption numbers is provided, but you can type any number there as well.
Turning off the Labels Required field warning Pre-printing forms for future use To prevent returned packages, MASTERFORM reminds you to check the Labels Required field before leaving the Ground or Air Shipment screen. NOTE: As of version 3.0.2 of MASTERFORM for UPS Domestic Editon, Print Ahead Mode is not an option due to the integration with UPS WorldShip®. If you wish to continue using the Print Ahead Mode option until January 6, 2003, you must use MASTERFORM v3.0.1 or earlier.
Features and Options 62 63
Writing notes inside MASTERFORM You can leave electronic notes inside MASTERFORM that are specific to a particular field. To write a note: 1. Place your cursor in the field to which the note pertains. 2. Right-click and choose Note from the pop-up menu. 3. Type your note inside the yellow note window. When you finish, simply close the note by clicking the X in the top right corner. Your text will be saved automatically.
Entering addresses in the Address Book To access the Address Book, click the button with an open-book icon found on both the Shipper Information and Shipment Information screens. Figure 18 shows the location of the Address Book icon on the Shipper Information screen. Figure 17: A checkmark next to the Note option indicates that a note has been saved. Figure 18: Look for the open-book icon on the Shipper Information and Shipment Information screens to open the address book.
To select an address, search for the name or browse the letter groupings. When you find the address you want, highlight the name by clicking once anywhere within the entry. Then click Select. The address will be pulled into your template. Import Excel or Access address data to the Address Book If you have addresses in an Excel or Access table, you can import them into the MASTERFORM Address Book database found in C:\MF_UPS\ Exchange.mdb > Tables > upsAddress.
Figure 20: Format your address data into columns with these exact names. Figure 21: Highlight the table named upsAddress before importing. Step 2: Import your data into the upsAddress table IMPORTANT: The upsAddress table itself should not be open when you go to import. Make sure the table is closed but highlighted, then perform the following steps: A table within the database named Exchange.mdb controls the Address Book feature of MASTERFORM.
Click Next on the first screen of the import wizard to continue. On the next screen, make sure the First Row Contains Column Headings check box is selected. Then click Next again. Note: If you import more addresses later, do not use column headings at all. You will not be able to import column headings more than once, so these instructions apply only to your first import.
(e) Click Next to continue. (f) Confirm that the Import to Table field reads “upsAddress,”then click Finish. Access will pull your data into MASTERFORM for UPS. Open MASTERFORM and make sure your address data is there. If you encounter any errors during the import process, double-check your steps. Make sure the upsAddress table is not open and your columns are named correctly, then try again.
4. When you select Save As/Export, you will be asked how you want to save the table. You could save a copy of your address data within Exchange.mdb under another name, but it’ s more likely that you’ ll want this information outside of Exchange. In this case, choose to save the table to an external file or database and click OK. (See Figure 26.) Figure 27: Specify a location and file type, then click Export. Figure 26: Select how you want to save the table. 5.
Setting default field values Saving multiple field values You can set a default value for an individual field in the MASTERFORM wizard. A default field value will automatically appear in the field even when you begin a brand new template. MASTERFORM allows you to save or “remember”a value for an individual field. For example, if you have a standard list of names you want to appear in the Signature field, you can save them as remembered values.
Viewing the regulations MASTERFORM has the option of linking directly to relevant 49 CFR regulations while you are working in the program. The regulation reference list is context-sensitive; that is, the references you see listed will change according to what screen you are in. If you find that the Regulations menu option is grayed out, move to a different screen and try again. Some screens do not have any regulatory references associated with them.
The Form-Fill Wizard Step by Step 82 83
Screen 1: Shipment Template When you double-click the UPS hazmat shipping paper icon on the main MASTERFORM menu, the first screen you see is titled Shipment Template. If you are beginning a brand new shipment, click Next while the Template field reads . Then select which form design you plan to use for this shipment (laser or tractor). Now you can begin filling in your shipping paper.
Screen 2: Shipper Information In this screen, enter information about the shipper; that is, you and your company. A field name in bold indicates that the field is required. On this screen the Signature field is the only optional field. The signature can be written in later by hand. If your account number is not in the list, cancel this template and enter your account number in Setup. See MASTERFORM Setup for more information.
Screen 5: The Chemical Table Once you’ ve opened the chemical table, you have five ways to find the item you want: 1. Type the proper shipping name (PSN) directly under Basic Description 2. Type the I.D. directly in the I.D. Number field 3. Scroll the alphabetical list of PSNs 4. Scroll the list of ID numbers 5. Click the Lookup button and type the name Figure 32: After selecting a material from the table, modify the PSN as necessary.
Screen 6: Ground or Air Shipment The Ground or Air Shipment screen is where you enter the mass/capacity of the material you are shipping. This screen is also where you can specify exemption packaging numbers and labels required. Specify Labels Required, Exemption Packaging Numbers, and Subsidiary Risk You can edit the Labels Required field as necessary. More than one label name will appear here if more than one is listed in the UPS chemical table.
Changing the Emulation Mode on the printer (tractor only) Moving fields on the form Increasing/decreasing point size of printed text Setting the margins Screen 8: Print and Save Shipment Template When you close the print preview window you will see the Print and Save Shipment Template screen. If you want to save this shipment as a template, give the template a name and make sure the Save as Template check box is selected before you click Done. The Template Description field is optional.
Printing the Hazardous Materials Shipping Paper 94 95
General Printing Overview MASTERFORM prints two forms: the UPS Hazardous Materials (hazmat) Shipping Paper (on tractor or laser form) and the Shipper’ s Certification end-of-day log. Form 1: Hazmat Shipping Paper The hazmat shipping paper is available as an 8-part carbon form or as a single-sheet laser form. Both forms are only available through UPS. Form 2: Shipper’ s Certification The Shipper’ s Certification is generated by MASTERFORM and prints on plain, blank 81/2 x 11 inch paper.
Installing a printer If you are installing a printer for the first time to use with MASTERFORM, follow these steps: 1. Attach the printer cable to the computer and plug in the printer. 2. Install the printer driver: go to Start > Settings > Printers. Creating a custom paper size (tractor) Creating a custom paper size is only necessary if you are using the 8-part carbon shipping paper (i.e., the tractor form type).
If you find that you cannot create a custom paper size because the option to do so isn’ t enabled, follow the steps outlined in Changing the Printer Driver and Changing the Emulation Mode on the Printer before attempting to create a custom paper size. To manually create a custom paper size (Windows NT & 2000): To manually create a custom paper size (Windows 95 & 98): 3. Check the box Create New Form. 1.
Changing the printer driver Right-click on the printer icon and choose Properties from the pop-up menu. Click the New Driver button (in the Details or General tab), then select the new driver. If your dot matrix printer (for the tractor form) is one of the Lexmark or Okidata models listed below, you can easily bypass the factory-set form length on your printer by changing your printer driver to an Epson model.
your printer. Both http://www.lexmark.com and http://www.okidata.com provide drivers that you can download for free. Changing the Emulation Mode on the printer (tractor) To change to the Epson driver: How do you know if you’ re in the right mode? If you get a series of symbols and strange characters instead of words when you try to print, it means your printer driver and your Emulation Mode do not match.
4. Press the Pitch button once. The setup menu will print the Epson Emulation option. Setting the Margins 5. Press Start/Stop repeatedly until the ALT light stops blinking. To set margins, choose Page Setup from the main File menu and enter margin settings in the Margins tab. You can only get to Page Setup from the Print Preview of your form. [Margins can also be changed following the steps in the section MASTERFORM Setup.] You want to keep this menu setting with the Emulation set to Epson Mode.
If margin adjustments are not working for all fields when you have printed, use the Nudge tool to move field-specific information. (See Moving fields on the form: use the Nudge tool.) Moving fields on the form: use the Nudge tool If your information prints too high… …increase the top margin by the amount it is away from the correct printing position. You may sometimes need to make minor adjustments to individual fields on the shipping paper to get it to print correctly.
“”is the original setting for the information. Some fields print incorrectly because of slightly different printer configurations. 4. Use the two A buttons to increase or decrease the point size of the highlighted information. If you are using a laser printer, we recommend print out a “practice”form on blank 8 1/2 x 11 inch paper on your initial printing attempt.
Increase or decrease the size of printed text Add or remove lines from the printed form Use the Nudge dialog to increase or decrease the size of any individual portion of text: You can put up to three materials on a shipping paper and if you are using the 8-part carbon form, MASTERFORM can print lines in between each material on your shipping paper for clarity. If you want lines between each material, make sure the Print Data Only check box in Page Setup is not selected. 1.
Printing the Shipper’ s Certification 114 115
Printing the certification To print the certification, double-click the Shipper’ s Certification icon at the beginning of the program, select the date and the account number you want, then click the Print button. MASTERFORM compiles certification information automatically based on the hazmat shipping papers you print each day. This saves you the trouble of retyping your daily shipment details for the end-of-day log. Therefore, you can’ t print a certification without first creating shipping papers.
Saving shipments to the certification Removing mistakes or duplicates from the certification MASTERFORM automatically compiles Shipper’ s Certification end-of-day logs based on the hazmat shipping papers you print each day. This saves you the trouble of retyping or rewriting your daily shipment details for the log book. You can prevent a mistake or duplicate shipment from appearing on the Shipper’ s Certification by using the Void button on the Review Packages screen right before you print.
Purge old certification records If you’ ve been using MASTERFORM for a while, your archive of Shipper’ s Certifications may be getting too long. You can purge some of these records by using the Purge Masterform Data function. Important! Make sure you keep printed copies of all your certifications for billing and record-keeping purposes. Once you purge these records, they will be permanently deleted and you won’ t be able to get them back.
Troubleshooting Overview This chapter discusses some known issues and common problems with MASTERFORM. If you encounter an error message or problem, please go through the following checklist before contacting technical support. 122 • Can you recreate the problem consistently? You should always save your work, reboot your computer, and attempt to recreate the error before contacting Technical Support.
Account number not in the drop-down list Symptom: When you go to print out the certification end-of-day log, no account numbers appear in the drop-down list. Cause: This problem occurs in the Review Packages screen of the shipper’ s certification wizard. If there are no account numbers in the drop-down list, it means that no shipping papers have been printed yet.
Custom paper size not in paper size list Symptom: Windows NT users create a custom paper size, but it does not appear in the paper size drop-down list in Page Setup. Symptom: The shipping paper prints correctly on the tractor form, but after printing, the printer feeds up several more inches of paper before quitting. Cause: This is a known conflict between Microsoft Windows NT and the Epson FX-850 printer driver.
Printer prints blank pages Symptom: MASTERFORM prints out extra blank pages. Cause: Your margin settings are set too high. If your margin settings are higher than the recommended settings (see page 107), the program may print additional blank pages. Resolution/Workaround: To change your margin settings, complete all package information in the form-fill wizard as you would for generating a new package. When you arrive at the print preview, select Page Setup from the file menu.
Log book numbers are repeating Symptom: The same log book number appears on Certifications for more than one date. Cause: N/A (Program functions as intended.) Resolution/Workaround: The log book numbers are supposed to roll over and begin repeating after reaching a sequence of 100. An electronic log book is 50 “pages”long, as counted by the sequence number. Every MASTERFORM customer receives two electronic log books for a total of 100 sequential pages.
In UPS WorldShip®, the HAZMAT/DG Reference list is grayed out In UPS WorldShip®, the HAZMAT/DG Reference list is blank Symptom: In UPS WorldShip, in the area called Package Options, the box for HAZMAT/DG is grayed out. Symptom: In UPS WorldShip, the HAZMAT/DG Reference list field is blank. Cause: If the database has been setup correctly, it is mostly likely that WorldShip has been installed recently and your account is not yet in the WorldShip system.
Unexpected error occured in subsystem... Symptom: Upon opening MASTERFORM, the following error occurs: “Unexpected error occurred in subsystem link tables from db...” To see the shortcut path, right-click the MASTERFORM icon on your desktop and choose Properties from the pop-up menu. Click the Shortcut tab and check the path in the Target field. Cause: MASTERFORM can’ t find the databases it needs to run or those databases are corrupt.
Run Time Error 9 in Configure Reports Symptom: When you click a Configure Reports report icon, you encounter a Run Time Error 9 and cannot continue. Cause: This is a known issue between Microsoft Access and Hewlett Packard. It sometimes occurs when you have an HP printer set as your default printer.
You do not have a license with MS Access Symptom: When you open MASTERFORM, you receive a message box saying you do not have a license with Microsoft Access. Cause: This happens when you attempt to run an Access 97 run time application on a computer that has Office 2000 installed. Resolution/Workaround: Microsoft addressed this issue in an Office 2000 service pack. To resolve the issue, you must go to the Microsoft support site and download the latest Office 2000 Service Pack. (http://support.microsoft.
Uninstalling MASTERFORM Before you uninstall... Uninstalling and deleting directories will permanently delete your templates and addresses unless you manually save the databases that store them beforehand. If you want to save your templates and addresses, you can do so by saving a copy of the appropriate database files before uninstalling. MASTERFORM for UPS Domestic Edition templates are stored in the file named masterform.mdb. Addresses are stored in the file named Exchange.mdb.
License Agreement Below is the license agreement you confirmed when you installed MASTERFORM. If you have any questions, please contact the Labelmaster Software Sales Manager at 1-800-578-4955. USER LICENSE AGREEMENT FOR LABELMASTER SOFTWARE PRODUCTS, AN AMERICAN LABELMARK COMPANY NOTICE TO USER: DO NOT CONTINUE UNTIL YOU HAVE READ THIS AGREEMENT Our Software license is displayed on this install program so you could read it before continuing the installation of this subscription.
Software, AN AMERICAN LABELMARK COMPANY, publication is not included under the copyright laws. The public information in this Labelmaster Software, AN AMERICAN LABELMARK COMPANY, publication does contain proprietary formatting and information that is not public information.
LIMITED WARRANTY, LABELMASTER SOFTWARE, AN AMERICAN LABELMARK COMPANY, MAKES NO WARRANTIES, EXPRESS OR IMPLIED, AS TO PERFORMANCE, NON-INFRINGMENT OF THIRD PARTY RIGHTS, MERCHANT-ABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE. Some states do not allow the exclusion of implied warranties or limitations on how long an implied warranty may last, so the above limitation may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from state to state.
of Labelmaster Software, AN AMERICAN LABELMARK COMPANY. Index Should you have any questions concerning this Agreement, please contact us in writing at: Labelmaster Software Attn: Sales Manager 400 East Pine Street, Suite 210 Seattle, WA 98122 Toll Free Phone: 1-800-578-4955 E-mail: softwaresales@labelmaster.
default field values 78 deleting templates 53 demo version 15 Domestic 17 dot matrix 97 E editing 57 emergency contact phone 86 Emulation Mode 105 Epson drivers 104 Epson FX-850 126 error message 123 Excel 69 Exchange.mdb 70 Exemption Packaging 43 exporting addresses 75 ExportWS.mdb 24 Hardware Recommendations 33 hazmat hotline 32 hazmat shipping paper 97 HM 215-D 13 how to print 97 HP laser printers 103, 108 I I.D.
N Q NAID 89 new driver 97, 103 notes 65 Nudge tool 92, 109 quantity limitations 89, 90 O ODBC Data Source Administrator 22 Office 2000 137 Okidata 97, 103, 106 online demo 31 online training 31 Options (Setup) 42 Other Required Information 86 P Package Label Warning 42 package reference 86 packaging provisions 89 Page Setup 107 page size 99 paper size 99 passenger or cargo 86 password protection 18, 47 pre-print 61 Print Ahead Mode 43, 61 Print Data Only 113 Print Preview 91, 92 Print Setup 107 printer
symbols 125 system DSN 20 system requirements 33 T Technical Name 87 technical support 31 templates 51-57 text 113 tractor forms 107 training 31 Transport Mode 86 Transportation Safety Institute (TSI) 16 troubleshooting 121 TSI Hazmat Training program 16 W warning 60 weight 90 Windows 95 100 Windows NT 101 WorldShip 20 U U.S.
156 157
400 East Pine Street, Suite 210 Seattle, WA 98122 Published by Labelmaster Software, an American Labelmark Company © 2002 Second Edition 158