International User's Guide Forms Printer 2500 Series

Loading cut forms

Cut forms can be single sheets, envelopes, or multiple-part forms. They are placed one at a time into the manual

feeder.

Loading a cut form or envelope manually

Note: If you have installed the optional Auto Sheet Feeder or Tractor 2 Feeder, see the documentation that came

with the option, for paper loading instructions.

1 Turn the printer on.

2 Make sure the paper path is clear.

3 If continuous forms are currently loaded, tear off the leading edge of the continuous form, and then press

Load/Unload to park the continuous forms.

The Paper Out light blinks.

4 Set the forms thickness lever to a corresponding setting for the type of paper you are using.

5 Move the paper select lever up to the position.

6 Open the manual feeder.

Loading paper