Datasheet

ManualsBrandsLexmark ManualsPrint & ScanX644A11L

Material Safety Data Sheet

PN X644A11L

_____________________________________________________________________________________________

X642, X644, X646 Return Program Print Cartridge

_____________________________________________________________________________________________

Lexmark has determined that Material Safety Data Sheets are not required for print cartridges. For customer

convenience, Lexmark provides product information in this familiar format.

X644A11L

Revision Date: 11/22/2005

Page 1 of 4

Section 1 - Product and Company Identification

Product Name: X642, X644, X646 Return Program

Print Cartridge

Manufacturer: Lexmark International, Inc.

Product ID: X644A11L

740 West New Circle Road

Chemical Family: Toner Cartridge

Lexington, KY 40550

Application: Laser Printer Information: 1-859-232-3000

Prepared By: Product Environmental Programs Emergency: 1-859-232-3333

Section 2 - Composition / Information on Ingredients

Ingredients Percent (wt.) CAS Number OSHA PEL ACGIH TLV

Polyester Resin

NJTSRN 80100286-6001P

65-85 Trade Secret None None

Iron Oxide 6-13 1317-61-9 None None

Carbon Black 1-10 1333-86-4 3.5 mg/m³ TWA 3.5 mg/m³ TWA

Polymer Wax

NJTSRN 80100451-5016

1-5 Trade Secret None None

Amorphous Silica (modified)

NJTSRN 80100451-5015

1-3 Trade Secret None None

Section 3 - Hazards Identification

The following information is based on testing of the product as a whole and/or characteristics of components.

Hazard Information:

Primary Routes of Exposure: Dust inhalation, skin contact.

Inhalation:

Low acute inhalation toxicity. As with exposure to high concentrations of any dust,

minimal irritation of the respiratory tract may occur. Exposure not probable with

intended use.

Skin Contact:

Not an irritant. Low dermal toxicity. Not a dermal sensitizer.

Eye Contact:

Toner may act as a mechanical irritant.

Ingestion:

Low acute oral toxicity. Exposure not probable with intended use.

Section 4 - First Aid Measures

Inhalation:

If symptoms, such as shortness of breath or persistent coughing are experienced,

remove source of contamination and move individual to fresh air. If symptoms

persist, seek medical attention.

Skin Contact:

Wash with soap and water. Should irritation occur, seek medical attention.

Eye Contact:

Do not rub eyes. Flush immediately with plenty of water. Remove contact lenses

and continue flushing for at least 15 minutes. If irritation develops and persists,

seek medical attention.

Summary of content (4 pages)

PAGE 1
Material Safety Data Sheet PN X644A11L _____________________________________________________________________________________________ X642, X644, X646 Return Program Print Cartridge _____________________________________________________________________________________________ Lexmark has determined that Material Safety Data Sheets are not required for print cartridges. For customer convenience, Lexmark provides product information in this familiar format.
PAGE 2
Ingestion: Do not induce vomiting. Slowly dilute with 1-2 glasses of water or milk and seek medical attention. Never give anything by mouth to an unconscious person. Aggravated Conditions: Exposure to high airborne dust concentrations, including toner, may aggravate existing respiratory conditions. Notes to Physician: No specific antidote.
PAGE 3
Section 9 - Physical and Chemical Properties Physical State: Solid powder Color: Black Odor: Faint plastic-like odor Specific Gravity: Not determined Solubility in Water: Insoluble Freezing Point/Range (°C): Melting Point/Range: Vapor Density (Air=1): % Volatiles: Evaporation Rate: Not applicable Not determined Not applicable Not determined Not applicable Section 10 - Stability and Reactivity Chemical stability: Stable Hazardous Polymerization: Will not occur Conditions to Avoid: High temperatures a
PAGE 4
Section 13 - Disposal Considerations Waste Disposal: This product is not a listed hazardous waste in accordance with Federal Regulation 40 CFR Part 261. If discarded in its purchased form, this product would not be a hazardous waste either by listing or by characteristic. However, under RCRA, it is the responsibility of the product user to determine at the time of disposal whether a material has been contaminated and should be classified as a hazardous waste.