User Guide

ManualsBrandsLexmark ManualsOtherX782

Quick Reference

Lexmark™ X782

Loading paper and

specialty media

Loading 500-sheet trays

1 Remove the tray and place it on a flat, level

surface.

2 Squeeze the front guide lever and slide the

guide to the front of the tray.

3 Squeeze the side guide lever and slide the

guide to the correct position for the size paper

you are loading. Icons along the back of the tray

indicate paper sizes.

4 Flex the sheets back and forth to loosen them,

and then fan them. Do not fold or crease the

paper. Straighten the edges of the stack on a

level surface.

5 Place the paper in the tray as shown, print side

down.Do not load bent or wrinkled paper.

6 Squeeze the front guide lever and slide the

guide until it firmly touches the stack of paper.

7 Reinstall the tray.

8 Make sure the tray is pushed completely into

the printer.

Loading the 2000-sheet tray

1 Pull open the tray.

2 Squeeze the side guide lever, lift the guide, and

place it into the appropriate slot for the size

paper you are loading.

3 Squeeze the two front guide levers and slide the

guide to the correct position for the size paper

you are loading.

4 Slide the bottom support toward the front of the

tray until it touches the front guide.

Maximum stack height

indicator

LT.LG

Summary of content (5 pages)

PAGE 1
Quick Reference Lexmark™ X782 5 Place the paper in the tray as shown, print side down.Do not load bent or wrinkled paper. Maximum stack height indicator Loading the 2000-sheet tray 1 Pull open the tray. 2 Squeeze the side guide lever, lift the guide, and place it into the appropriate slot for the size paper you are loading. Loading paper and specialty media Loading 500-sheet trays 1 Remove the tray and place it on a flat, level surface.
PAGE 2
5 Flex the sheets back and forth to loosen them, and then fan them. Loading the multipurpose feeder 1 Open the multipurpose feeder. Do not fold or crease the paper. Straighten the edges of the stack on a level surface. 4 Arrange the stack of paper or specialty media correctly for the size, type, and print method you are using. 6 Place the paper against the back left corner of the tray, print side down. Do not load bent or wrinkled print media.
PAGE 3
5 Set the number of copies. 6 Change the copy options to meet your Copying Making a copy 1 Place the original document faceup in the automatic document feeder (ADF) or facedown on the flatbed. Adjust the paper guides when using the ADF. 2 Press Go on the numeric pad. requirements. 7 Touch Copy It. 8 Touch Scan Next if you have more pages to scan, or touch Finish the Job if you are done. Touching Finish the Job returns the printer to the copy screen. 9 Touch Home when you are finished.
PAGE 4
For example, select 1 --> 2-sided if you have 1sided original documents and you want 2-sided copies. Note: To place a two-second dialing pause within a fax number, use the Dial Pause button. 6 Touch Held jobs on the home screen. 7 Touch your user name. Note: If your name does not appear, touch 5 Touch Copy It. Copying multiple pages onto a single sheet 1 Place your original document in the automatic document feeder faceup, short-edge first.
PAGE 5
interface until the document has finished printing. 4 Rotate the roller forward with your finger, and repeat step 3 until the entire roller is cleaned. Roller Canceling a job from the printer control panel If the job is formatting, scanning, or already printing, touch Cancel Job on the display. Maintaining the printer Cleaning the scanner glass and backing material 1 Open the document cover. 2 Dampen a clean, lint-free cloth or cotton swab with isopropyl alcohol (95%).