X950 Series User's Guide May 2013 Machine type(s): 7558 Model(s): 032, 036, 232, 236, 432, 436, 496 www.lexmark.
Contents 2 Contents Safety information.......................................................................................7 Learning about the printer...........................................................................9 Finding information about the printer......................................................................................................9 Selecting a location for the printer.......................................................................................................
Contents 3 Minimizing your printer's environmental impact........................................59 Saving paper and toner...........................................................................................................................59 Saving energy..........................................................................................................................................60 Recycling...................................................................................................
Contents 4 E-mailing..................................................................................................108 Getting ready to e-mail.........................................................................................................................108 Creating an e-mail shortcut...................................................................................................................109 E-mailing a document..........................................................................
Contents 5 Maintaining the printer............................................................................231 Cleaning the exterior of the printer......................................................................................................231 Cleaning the scanner glass....................................................................................................................232 Cleaning the printhead lenses...............................................................................
Contents 6 Solving printing problems.....................................................................................................................304 Solving copy problems..........................................................................................................................308 Solving scanner problems.....................................................................................................................311 Solving fax problems.........................................
Safety information 7 Safety information Connect the power cord to a properly grounded electrical outlet that is near the product and easily accessible. Do not place or use this product near water or wet locations. CAUTION—POTENTIAL INJURY: The lithium battery in this product is not intended to be replaced. There is a danger of explosion if a lithium battery is incorrectly replaced. Do not recharge, disassemble, or incinerate a lithium battery.
Safety information 8 CAUTION—SHOCK HAZARD: Do not use the fax feature during a lightning storm. Do not set up this product or make any electrical or cabling connections, such as the fax feature, power cord, or telephone, during a lightning storm. CAUTION—POTENTIAL INJURY: To reduce the risk of equipment instability, load each paper drawer or tray separately. Keep all other drawers or trays closed until needed. CAUTION—TIPPING HAZARD: Floor-mounted configurations require additional furniture for stability.
Learning about the printer 9 Learning about the printer Finding information about the printer What are you looking for? Find it here Initial setup instructions: Setup documentation—The setup documentation came with the printer and is also available on the Lexmark Web site at http://support.lexmark.com.
Learning about the printer 10 What are you looking for? Find it here The latest supplemental information, updates, and customer support: Lexmark Support Web site— http://support.lexmark.com • • • • • Documentation Driver downloads Live chat support E‑mail support Voice support Note: Select your country or region, and then select your product to view the appropriate support site.
Learning about the printer 11 5 1 4 3 1 Right side 307.34 mm (12.1 in.) 2 Front 444.5 mm (17.5 in.) 3 Left side 374.65 mm (14.75 in.) 4 Rear 100 mm (3.9 in.) 5 Top 304.8 mm (12 in.) 2 Printer configurations CAUTION—TIPPING HAZARD: Floor‑mounted configurations require additional furniture for stability. You must use either a printer stand or printer base if you are using a high‑capacity input tray, a duplex unit and an input option, or more than one input option.
Learning about the printer 12 Basic model 2 1 3 4 5 6 8 7 1 Automatic Document Feeder (ADF) 2 ADF input tray 3 ADF exit bin 4 Printer control panel 5 Exit tray 2 6 Standard exit bin 7 Standard 520‑sheet tray 8 Multipurpose feeder Configured models You can configure your basic printer by adding optional trays. A 2,000-sheet high‑capacity feeder and a finisher bin can also be added.
Learning about the printer 4 13 Optional 2,000‑sheet tandem‑tray module • 850‑sheet tray (Tray 3) • 1,150‑sheet tray (Tray 4) Fully configured model 1 2 1 Finisher bin The finisher bin can either be one of the following: • Standard finisher (Punch/Stapler) • Booklet finisher (Punch/Stapler/Booklet) 2 2,000‑sheet high‑capacity feeder Basic functions of the scanner The scanner provides copy, fax, and scan-to-network capability for large workgroups.
Learning about the printer 14 Understanding the ADF and scanner glass Automatic Document Feeder (ADF) Scanner glass Use the ADF for multiple‑page documents. Use the scanner glass for single pages, small items (such as postcards or photos), transparencies, photo paper, or thin media (such as magazine clippings). You can use the ADF or the scanner glass to scan documents. Using the ADF The ADF can scan multiple pages including two‑sided (duplex) pages.
Learning about the printer 15 Understanding the printer control panel 3 2 1 1 @!. 2 ABC 3 DEF 4 5 6 MNO 7 GHI PQRS * 7 Item 8 TUV 0 9 WXYZ # 6 5 Description 1 Display 2 Indicator light 3 JKL 4 Sleep Shows the status of the printer, and allows printer setup and operation • • • • Off—The printer is off. Blinking green—The printer is warming up, processing data, or printing. Solid green—The printer is on, but idle.
Understanding the home screen 16 Understanding the home screen Understanding the home screen When the printer is turned on, the display shows a basic screen, referred to as the home screen. Touch the home screen buttons and icons to initiate an action such as copying, faxing, or scanning; to open the menu screen; or to respond to messages. Note: Your home screen, icons, and buttons may vary depending on your home screen customization settings, administrative setup, and active embedded solutions. 123.123.
Understanding the home screen 17 Other buttons that may appear on the home screen: Touch To Search held jobs Search on any of the following items: • • • • • Release Held Fax User name for held or confidential print jobs Job names for held jobs, excluding confidential print jobs Profile names Bookmark container or print job names USB container or print job names for supported file types Access the list of held faxes.
Understanding the home screen 18 Features Feature Description Menu trail line A menu trail line is located at the top of each menu screen. This feature shows the path taken to arrive at the current menu. Sample: Menus > Settings > Copy Settings > Number of Copies Touch any of the underlined words to return to that menu. Number of Copies is not underlined since this is the current screen.
Understanding the home screen 19 Touch To Right arrow Scroll to the right. Left arrow Scroll to the left. Home Return to the home screen. Right increase Select a higher value. Left decrease Select a lower value. Exit Exit from the current screen. Tips Open a context-sensitive Help dialog on the touch screen. Other touch-screen buttons Touch To Accept Save a setting. Cancel • Cancel an action or a selection. • Exit a screen and return to the previous screen without saving changes.
Understanding the home screen 20 Touch To Reset Reset values on the screen.
Setting up and using the home screen applications 21 Setting up and using the home screen applications Notes: • Your home screen, icons, and buttons may vary depending on your home screen customization settings, administrative setup, and active embedded applications. Some applications are supported only on select printer models. • There may be additional solutions and applications available for purchase. To learn more, visit www.lexmark.com. Or, contact the place where you purchased the printer.
Setting up and using the home screen applications 22 Activating the home screen applications Your printer comes with preinstalled home screen applications. Before you can use these applications, first activate and set up these applications using the Embedded Web Server. For more information about accessing the Embedded Web Server, see “Accessing the Embedded Web Server” on page 21.
Setting up and using the home screen applications 23 3 Specify the destinations, and then customize the settings. 4 Click Apply. To use the application, touch Scan to Network on the printer home screen, and then follow the instructions on the printer display. Setting up My MFP Icon Description The application lets you customize your touch‑screen settings and store those preferences in a flash drive. Each time you want to copy, fax, or scan, insert the flash drive into the USB port of the printer.
Setting up and using the home screen applications 24 To use the application, from the Embedded Web Server, click Applications > Remote Operator Panel > Launch VNC Applet. Exporting and importing a configuration You can export configuration settings into a text file, and then import it to apply the settings to other printers. Exporting a configuration to a file 1 Open a Web browser, and then type the printer IP address in the address field.
Additional printer setup Additional printer setup Turning on the printer 1 Open the front door. 2 Press the printer power switch. 3 Close the front door.
Additional printer setup 26 Installing internal options CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.
Additional printer setup 27 Note: This task requires a flathead screwdriver. 1 Turn the screws counterclockwise to loosen them. 2 Pull the system board forward to remove it. 3 Use the following illustration to locate the appropriate connectors. Warning—Potential Damage: System board electronic components are easily damaged by static electricity. Touch something metal on the printer before touching any system board electronic components or connectors.
Additional printer setup 28 1 2 3 1 ISP connector 2 Firmware and flash memory card connectors 3 Memory card connectors 4 Push the system board back into place. Installing a memory card CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the wall outlet before continuing.
Additional printer setup 29 3 On the system board, open the memory card connector latches. 4 Align the notch on the memory card to the ridge on the connector.
Additional printer setup 30 5 Push the memory card into the connector until it clicks into place. Installing a flash memory or firmware card The system board has two connections for an optional flash memory or firmware card. Only one of each may be installed, but the connectors are interchangeable.
Additional printer setup 31 3 Holding the card by its sides, align the plastic pins on the card with the holes on the system board. 2 1 1 Plastic pins 2 Metal pins 4 Push the card firmly into place. Notes: • The entire length of the connector on the card must touch and be flush against the system board. • Be careful not to damage the connectors. Installing an Internal Solutions Port The system board supports one optional Lexmark Internal Solutions Port (ISP).
Additional printer setup 32 Warning—Potential Damage: System board electronic components are easily damaged by static electricity. Touch something metal on the printer before touching any system board electronic components or connectors. 1 Access the system board. For more information, see “Accessing the system board” on page 26. 2 Remove the printer hard disk. For more information, see “Removing a printer hard disk” on page 38 3 Unpack the ISP kit.
Additional printer setup 5 Use the provided screw to attach the ISP solution to the system board cage. 6 Connect the ISP solution interface cable into the receptacle of the system board.
Additional printer setup 34 7 Firmly connect the ISP solution to the system board cage using two screws. Installing a printer hard disk Note: This task requires a flathead screwdriver. CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the wall outlet before continuing.
Additional printer setup 3 Locate the appropriate connector on the system board. Note: If an optional ISP is currently installed, then the printer hard disk must be installed onto the ISP. To install a printer hard disk onto the ISP: a Using a flathead screwdriver, loosen the screws. b Remove the screws attached to the printer hard disk mounting bracket, and then remove the bracket.
Additional printer setup 36 c Align the standoffs of the printer hard disk to the holes in the ISP, and then press down on the printer hard disk until the standoffs are in place. d Insert the plug of the printer hard disk interface cable into the receptacle of the ISP. Note: The plugs and receptacles are color‑coded.
Additional printer setup 37 To install a printer hard disk directly on the system board: a Align the standoffs of the printer hard disk to the holes in the system board, and then press down on the printer hard disk until the standoffs are in place. b Use the two provided screws to attach the printer hard disk mounting bracket. c Insert the plug of the printer hard disk interface cable into the receptacle of the system board. Note: The plugs and receptacles are color‑coded.
Additional printer setup Removing a printer hard disk Note: This task requires a flathead screwdriver.
Additional printer setup 39 Warning—Potential Damage: System board electronic components are easily damaged by static electricity. Touch something metal on the printer before touching any system board electronic components or connectors. 1 Access the system board. For more information, see “Accessing the system board” on page 26. 2 Unplug the printer hard disk interface cable from the system board, leaving the cable attached to the printer hard disk.
Additional printer setup 40 3 Remove the screws while holding the printer hard disk in place, and then remove the printer hard disk. 4 Set aside the printer hard disk. Installing hardware options Order of installation CAUTION—TIPPING HAZARD: Floor-mounted configurations require additional furniture for stability. You must use either a printer stand or printer base if you are using a high-capacity input tray, a duplex unit and an input option, or more than one input option.
Additional printer setup 41 Install the printer and any optional trays or finishers you have purchased in the following order: Using a one‑tray module • Optional 520‑sheet tray (Tray 2) • Printer • 2,000‑sheet high‑capacity feeder • Finisher Using a three‑tray module • Three‑tray module • Printer • 2,000‑sheet high‑capacity feeder • Finisher Using a tandem‑tray module • Tandem‑tray module • Printer • 2,000‑sheet high‑capacity feeder • Finisher For information on installing a one‑tray module, three‑tray m
Additional printer setup 42 4 Align the printer with the tray, and then lower the printer into place.
Additional printer setup 43 1 2 1 Tandem‑tray module 2 2,000‑sheet high‑capacity feeder 5 Turn the printer back on. 6 Set the printer software to recognize the optional tray. For more information, see “Updating available options in the printer driver” on page 46. Attaching cables CAUTION—POTENTIAL INJURY: Do not use the fax feature during a lightning storm.
Additional printer setup 44 5 1 4 3 2 1 Telephone port 2 Fax port 3 Ethernet port 4 USB printer port 5 USB port Warning—Potential Damage: Do not touch the USB cable, any network adapter, or the printer in the area shown while actively printing. A loss of data or a malfunction can occur.
Additional printer setup 45 Printing a network setup page If the printer is attached to a network, then print a network setup page to verify the network connection. This page also provides important information that aids network printing configuration. 1 From the home screen, navigate to: > Reports > Network Setup Page 2 Check the first section of the network setup page, and confirm that the status is Connected.
Additional printer setup Updating available options in the printer driver When any hardware options are installed, you may need to manually add the options in the printer driver to make them available for use. For Windows users 1 Open the printers folder. In Windows 8 From the Search charm, type run, and then navigate to: Apps list > Run > type control printers > OK In Windows 7 or earlier a Click or click Start, and then click Run. b In the Start Search or Run dialog, type control printers.
Additional printer setup 47 Setting up wireless printing Note: A Service Set Identifier (SSID) is a name assigned to a wireless network. Wired Equivalent Privacy (WEP), Wi-Fi Protected Access (WPA), WPA2, and 802.1X - RADIUS are types of security used on a network. Preparing to set up the printer on a wireless network Notes: • Make sure your wireless network adapter is installed in your printer and working properly.
Additional printer setup 48 Installing the printer on a wireless network (Windows) Before installing the printer on a wireless network, make sure: • Your wireless network is set up and is working properly. • The computer you are using is connected to the same wireless network where you want to set up the printer. 1 Connect the power cord to the printer, then to a properly grounded electrical outlet, and then turn on the printer. Note: Make sure the printer and the computer are fully on and ready.
Additional printer setup 49 Note: D is the letter of your CD or DVD drive. 4 Click Install, and then follow the instructions on the computer screen. 5 Select Wireless connection when asked to choose a connection type. 6 From the Wireless Configuration dialog, select Guided Setup (Recommended). Note: Choose Advanced Setup only if you want to customize your installation. 7 Temporarily connect a USB cable between the computer on the wireless network and the printer.
Additional printer setup 50 2 Locate the printer MAC address. a From the printer control panel, navigate to: > Reports > > Network Setup Page > or > Reports > Network Setup Page b In the Standard Network Card section, look for UAA (MAC). Note: You will need this information later. Enter the printer information 1 Access the AirPort options: In Mac OS X version 10.
Additional printer setup 51 In Mac OS X version 10.4 From the Finder, navigate to: Applications > Internet Connect > AirPort 7 From the Network pop‑up menu, select the name of the wireless network. Configure your computer to use the printer wirelessly To print on a network printer, each Macintosh user must install a custom printer driver file and create a print queue in the Printer Setup Utility or Print Center.
Additional printer setup • This feature is supported only in Mac OS X version 10.5 or earlier. In Mac OS X version 10.5 1 From the Apple menu, navigate to: System Preferences > Print & Fax 2 Click +, and then navigate to: AppleTalk > select the printer from the list > Add In Mac OS X version 10.4 1 From the Finder, navigate to: Applications > Utilities 2 Double‑click Printer Setup Utility or Print Center. 3 From the Printer List, click Add. 4 Click Default Browser tab > More Printers.
Additional printer setup 53 3 Click Install, and then follow the instructions on the computer screen. Note: To configure the printer using a static IP address, IPv6, or scripts, select Advanced Options > Administrator Tools. 4 Select Ethernet connection, and then click Continue. 5 Attach the Ethernet cable when instructed to do so. 6 Select the printer from the list, and then click Continue. Note: If the configured printer does not appear in the list, then click Modify Search.
Additional printer setup c From the printer list, click Add, and then click IP Printer. d Type the scanner IP address in the address field, and then click Add. • For AppleTalk printing: Notes: – Make sure AppleTalk is activated on your printer. – This feature is supported only in Mac OS X version 10.5 or earlier. In Mac OS X version 10.5 a From the Apple menu, navigate to: System Preferences > Print & Fax b Click +, and then navigate to: AppleTalk > select your printer > Add In Mac OS X version 10.
Additional printer setup 55 Changing port settings after installing a new network Internal Solutions Port When a new Lexmark Internal Solutions Port (ISP) is installed in the printer, the printer configurations on computers that access the printer must be updated since the printer will be assigned a new IP address. All computers that access the printer must be updated with this new IP address.
Additional printer setup 56 6 Type the new IP address in the “Printer Name or IP Address” field. 7 Click OK > Close. For Macintosh users 1 Open a Web browser, and then type the printer IP address in the address field. Notes: • View the printer IP address on the printer control panel. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123. • If you are using a proxy server, then temporarily disable it to load the Web page correctly. 2 Add the printer.
Additional printer setup 57 2 Install the printer driver. a Obtain a copy of the software installer package. • From the Software and Documentation CD that came with your printer • From our Web site: Go to http://support.lexmark.com, and then navigate to: SUPPORT & DOWNLOAD > select your printer > select your operating system b Double‑click the software installer package. Wait for the installation dialog to appear.
Additional printer setup c Do either of the following: • Press and hold the COM port where you attached the serial cable to your computer (example: COM1). • Right‑click the COM port where you attached the serial cable to your computer (example: COM1). d From the menu that appears, select Properties. e On the Port Settings tab, set the serial parameters to the same serial parameters set in the printer. Check the serial heading of the menu settings page for the printer settings.
Minimizing your printer's environmental impact 59 Minimizing your printer's environmental impact Lexmark is committed to environmental sustainability and is continually improving its printers to reduce their impact on the environment. We design with the environment in mind, engineer our packaging to reduce materials, and provide collection and recycling programs. For more information, see: • The Notices chapter • The Environmental Sustainability section of the Lexmark Web site at www.lexmark.
Minimizing your printer's environmental impact 60 Print in black and white To print all text and graphics using only the black toner cartridge, set the printer to Black Only. For more information, see “Printing in black and white” on page 88. Use Max Speed or Max Yield settings The Max Speed and Max Yield settings let you choose between a faster print speed or a higher toner yield. Max Speed is the factory default setting. For more information, see “Using Max Speed and Max Yield” on page 89.
Minimizing your printer's environmental impact 61 Choose To Off Use factory default settings. This setting supports the performance specifications of your printer. Note: Selecting Photo from the driver may disable Quiet Mode and provide better print quality and full speed printing. On Reduce printer noise. • Print jobs will process at a reduced speed. • Printer engine motors do not start until a document is ready to print. There will be a short delay before the first page is printed.
Minimizing your printer's environmental impact 62 Using Hibernate Mode Hibernate is an ultra‑low power operating mode. When operating in Hibernate mode, the printer is essentially off, and all other systems and devices are powered down safely. Note: The Hibernate and Sleep modes can be scheduled. Using the Embedded Web Server 1 Type the printer IP address in the address field of your Web browser.
Minimizing your printer's environmental impact 63 Recycling Lexmark provides collection programs and environmentally progressive approaches to recycling. For more information, see: • The Notices chapter • The Environmental Sustainability section of the Lexmark Web site at www.lexmark.com/environment • The Lexmark recycling program at www.lexmark.com/recycle Recycling Lexmark products To return Lexmark products for recycling: 1 Go to www.lexmark.com/recycle.
Loading paper and specialty media 64 Loading paper and specialty media Setting the paper size and type The Paper Size setting is automatically sensed according to the position of the paper guides in each tray except the multipurpose feeder. The Paper Size setting for the multipurpose feeder must be set manually from the Paper Size menu. The Paper Type setting must be set manually for all trays that do not contain plain paper.
Loading paper and specialty media CAUTION—POTENTIAL INJURY: To reduce the risk of equipment instability, load each paper drawer or tray separately. Keep all other drawers or trays closed until needed. 1 Pull the tray out. Notice the size indicators at the bottom of the tray. Use these indicators to help position the length and width guides.
Loading paper and specialty media 2 Squeeze and then slide the width guide to the correct position for the paper size loaded. 3 Squeeze and then slide the length guide to the correct position for the paper size loaded. Note: The length guide has a locking device. To unlock, slide the button on top of the length guide down. To lock, slide the button up when a length has been selected. 4 Flex the sheets back and forth to loosen them. Do not fold or crease the paper. Straighten the edges on a level surface.
Loading paper and specialty media 67 Notes: • • • • Place print side facedown for duplex printing. Place pre-punched paper with the holes toward the front of the tray. Place letterheads with the header on the left side of the tray. Make sure the paper is below the maximum fill line located on the edge of the paper tray. Warning—Potential Damage: Overloading the tray can cause paper jams and possible printer damage. 6 Insert the tray.
Loading paper and specialty media CAUTION—POTENTIAL INJURY: To reduce the risk of equipment instability, load each paper drawer or tray separately. Keep all other drawers or trays closed until needed. 1 Pull the tray out. 2 Squeeze and then slide the length guide to the correct position for the paper size you are loading. 3 Flex the sheets back and forth to loosen them. Do not fold or crease the paper. Straighten the edges on a level surface.
Loading paper and specialty media 69 4 Load the paper stack with the recommended print side faceup. Notes: • • • • • Place print side facedown for duplex printing. Place pre-punched paper with the holes toward the front of the tray. Place letterheads faceup with the header on the left side of the tray. Place letterheads facedown with the header on the right side of the tray for duplex printing. Make sure the paper is below the maximum fill line located on the edge of the paper tray.
Loading paper and specialty media Loading the 2000‑sheet high‑capacity feeder The high‑capacity feeder can hold up to 2,000 sheets of letter‑, A4‑, and legal‑size paper (80 g/m2 or 20 lb). 1 Pull the tray out. 2 Adjust the width guide as necessary.
Loading paper and specialty media 3 Flex the sheets back and forth to loosen them. Do not fold or crease the paper. Straighten the edges on a level surface. 4 Load paper into the tray with the print side faceup. Note: Make sure the paper is below the maximum fill line located on the edge of the paper tray. Overloading the tray can cause paper jams and possible printer damage.
Loading paper and specialty media 72 Notes: • Place pre-punched paper with the holes toward the front of the tray. • Place letterheads faceup with the header on the left side of the tray. • Place letterheads facedown with the header on the right side of the tray for duplex printing. 5 Insert the tray. Loading the multipurpose feeder The multipurpose feeder can hold several sizes and types of print media, such as transparencies, labels, card stock, and envelopes.
Loading paper and specialty media 73 2 For paper or specialty media that is longer than letter-size paper, gently pull the extension until it is fully extended. 3 Flex the sheets of paper or specialty media back and forth to loosen them. Do not fold or crease them. Straighten the edges on a level surface. Paper Envelopes Transparencies Note: Avoid scratching or touching the print side.
Loading paper and specialty media 74 4 Push the paper pick tab, and then load the paper or specialty media. Slide the stack gently into the multipurpose feeder until it comes to a stop, and then release the paper pick tab. Warning—Potential Damage: Pulling the paper out, without pushing the paper pick tab first, may cause jams or the paper pick tab to break. • Load paper and transparencies with the recommended print side facedown and the long edge entering the printer first.
Loading paper and specialty media 75 5 Adjust the width guide to lightly touch the edge of the stack. Make sure the paper or specialty media fits loosely in the multipurpose feeder, lies flat, and is not bent or wrinkled. 6 From the printer control panel, set the Paper Size and Paper Type for the multipurpose feeder (MP Feeder Size and MP Feeder Type) based on the paper or specialty media loaded.
Loading paper and specialty media 76 Creating a custom name for a paper type If the printer is on a network, you can use the Embedded Web Server to define a name other than Custom Type [x] for each of the custom paper types loaded into the printer. 1 Type the printer IP address into the address field of your Web browser. Note: If you do not know the IP address of the printer, then you can: • View the IP address on the printer control panel in the TCP/IP section under the Networks/Ports menu.
Paper and specialty media guide 77 Paper and specialty media guide Notes: • • • • Make sure the paper size, type, and weight are set correctly on the computer or on the printer control panel. Flex, fan, and straighten specialty media before loading it. The printer may print at a reduced speed to prevent damage to the fuser. For more information on card stock and labels, see the Card Stock & Label Guide on the Lexmark Web site at http://support.lexmark.com.
Paper and specialty media guide 78 Store paper in its original wrapper in the same environment as the printer for 24 to 48 hours before printing. Extend the time to several days if the storage or transportation environment is very different from the printer environment. Thick paper may also require a longer conditioning period. Grain direction Grain refers to the alignment of the paper fibers in a sheet of paper.
Paper and specialty media guide 79 Selecting preprinted forms and letterhead Use these guidelines when selecting preprinted forms and letterhead: • Use grain long for 60 to 90 g/m2 (16 to 24 lb) weight paper. • Use only forms and letterhead printed using an offset lithographic or engraved printing process. • Avoid papers with rough or heavily textured surfaces. Use papers printed with heat‑resistant inks designed for use in xerographic copiers.
Paper and specialty media guide 80 Lexmark does not endorse specific suppliers, although a converter’s product list for special applications is maintained. However, the following paper choice guidelines will help alleviate the environmental impact of printing: 1 Minimize paper consumption. 2 Be selective about the origin of wood fiber. Buy from suppliers who carry certifications such as the Forestry Stewardship Council (FSC) or The Program for the Endorsement of Forest Certification (PEFC).
Paper and specialty media guide 81 Supported paper sizes, types, and weights The following tables provide information on standard and optional paper input sources and the types of paper they support. Note: To use a paper size that is unlisted, configure a Universal Paper Size. Supported paper sizes Paper size and dimension 520‑sheet 2,000‑sheet tray drawer A4 1 MP feeder 1, 6 2, 6 Manual Manual paper envelope 2, 6 Duplex X ADF Scanner glass 2, 5, 6 (1, 4, 6) & 210 x 297 mm (8.27 x 11.7 in.
Paper and specialty media guide Paper size and dimension 82 520‑sheet 2,000‑sheet tray drawer SRA3 MP feeder X Manual Manual paper envelope X Duplex X ADF Scanner glass X X 320 x 450 mm (12.59 x 17.71 in.) 11x17 279 x 432 mm (11 x 17 in.) 1 12 x 18 X 2 X 2 X X 2 X 1 X 1, 3, 4 X 305 x 457 mm (12 x 18 in.) Oficio (México) 2 X 2 2 X 2 2 2 1 X 2 2 X 2 1, 2, (2, 4) & (1, 216 x 340 mm (8.5 x 13.4 in.) Folio 216 x 330 mm (8.5 x 13 in.
Paper and specialty media guide 83 Paper size and dimension 520‑sheet 2,000‑sheet tray drawer Manual Manual paper envelope Duplex ADF Scanner glass DL Envelope X X 2 X 2 X X X X X 2 X 2 X X X B5 Envelope X 176 x 250 mm (6.93 x 9.84 in.) X X X X X X X X Other Envelope7 76.22 x 76.22 mm (3 x 3 in.) up to 296.93 x 427.48 mm (11.69 x 16.83 in.) X X X X X X X MP feeder 110 x 220 mm (4.33 x 8.66 in.) C5 Envelope 162 x 229 mm (6.38 x 9.01 in.
Paper and specialty media guide Paper type 84 520‑shee 2,000‑sh MP feeder Manual t tray eet paper drawer Manual envelope Duplex X X X X Card stock X X X Transparencies X X X Labels X X X X X Heavy Glossy ADF Scanner glass Custom Type [x] Rough/Cotton Rough Envelope • Paper • Vinyl Envelopes X X X Finisher Use this table to determine the possible exit destinations of print jobs which use supported paper types and weights.
Paper and specialty media guide Paper type Standard 500‑sheet bin 85 Second exit bin Bin 1 Bin 2 Bin 3 Letterhead Preprinted Colored paper Light paper Heavy paper X Rough/Cotton Custom Type [x] Supported finishing features 1 4 2 3 1 Finisher standard bin 2 Finisher bin 1 3 Finisher bin 2 (booklet‑maker) 4 Paper transport Notes: • The finisher shown is the booklet finisher. Bin 2 is available only when the booklet finisher is installed.
Paper and specialty media guide 86 • Envelopes are routed here. • Universal paper is routed here when it is longer than 483 mm (19 inches) or shorter than 148 mm (6 inches). Finisher standard bin • The paper capacity is 500 sheets. • Envelopes and executive‑size paper are not supported in this bin. • Finishing options are not supported in this bin. Bin 1 • The paper capacity is 3,000 sheets when the standard finisher is installed.
Paper and specialty media guide Size 87 Bi fold Booklet fold Saddle staple A5 X X X Executive X X X X X X X X X Universal X X X Envelopes (any size) X X X A3 A4 (only SEF) SRA3 12 x 18 Folio JIS B4 JIS B5 Legal Letter (only SEF) Statement Tabloid SEF—The paper is loaded in the short edge orientation. The short edge of the paper enters the printer first. Bi fold—Each page is individually folded and stacked separately.
Printing 88 Printing The selection and handling of paper and specialty media can affect how reliably documents print. For more information, see “Avoiding jams” on page 265 and “Storing paper” on page 80. Printing a document Printing a document 1 From the printer control panel Paper menu, set the Paper Type and Paper Size to match the loaded paper. 2 Send the print job: For Windows users a With a document open, click File > Print. b Click Properties, Preferences, Options, or Setup.
Printing 89 If you do not know the IP address of the printer, you can: • View the IP address on the printer control panel in the TCP/IP section under the Networks/Ports menu. • Print a network setup page or the menu settings pages and locate the IP address in the TCP/IP section. 2 Click Settings > Print Settings > Quality Menu > Toner Darkness. 3 Adjust the toner darkness setting. 4 Click Submit.
Printing 90 Printing from a flash drive Printing from a flash drive Notes: • Before printing an encrypted PDF file, enter the file password from the printer control panel. • You cannot print files for which you do not have printing permissions. 1 Insert a flash drive into the USB port. Notes: • If you insert the flash drive when the printer requires attention, such as when a jam has occurred, then the printer ignores the flash drive.
Printing 91 2 From the printer control panel, touch the document you want to print. 3 Touch the arrows to increase the number of copies to print, and then touch Print. Notes: • Do not remove the flash drive from the USB port until the document has finished printing. • If you leave the flash drive in the printer after leaving the initial USB menu screen, then you can still print files from the flash drive as held jobs. Supported flash drives and file types Flash drive • Lexar JumpDrive 2.
Printing 92 Printing on specialty media Tips on using letterhead • • • • Use letterhead designed specifically for laser/LED printers. Print samples on the letterhead being considered for use before buying large quantities. Before loading letterhead, flex the sheets to prevent them from sticking together. Page orientation is important when printing on letterhead. Source Print side Paper orientation Standard and optional trays (simplex printing) Preprinted letterhead design is placed faceup.
Printing 93 Tips on using envelopes Print samples on the envelopes being considered for use before buying large quantities. • Use envelopes designed specifically for laser/LED printers. Check with the manufacturer or vendor to ensure that the envelopes can withstand temperatures up to 220°C (446°F) without sealing, wrinkling, curling excessively, or releasing hazardous emissions. • For best performance, use envelopes made from 90 g/m2 (24 lb bond) paper or 25% cotton.
Printing 94 • Do not print within 1 mm (0.04 in.) of the edge of the label, of the perforations, or between die‑cuts of the label. • Be sure adhesive backing does not reach to the sheet edge. Zone coating of the adhesive at least 1 mm (0.04 in.) away from edges is recommended. Adhesive material contaminates the printer and could void the warranty. • If zone coating of the adhesive is not possible, then remove a 1.6 mm (0.06 in.) strip on the leading and driver edge, and use a non‑oozing adhesive.
Printing 95 Printing confidential and other held jobs Note: Confidential and Verify print jobs are automatically deleted from memory after printing. Repeat and Reserve jobs are held in the printer until you choose to delete them. For Windows users 1 With a document open, click File > Print. 2 Click Properties, Preferences, Options, or Setup. 3 Click Print and Hold. 4 Select the print job type (Confidential, Repeat, Reserve, or Verify), and then assign a user name.
Printing 96 Printing a directory list A directory list shows the resources stored in a flash memory or on the printer hard disk. From the home screen, navigate to: > Reports > Print Directory Canceling a print job Canceling a print job from the printer control panel 1 From the printer control panel, touch Cancel Job or press on the keypad. 2 Touch the print job you want to cancel, and then touch Delete Selected Jobs. Note: If you press on the keypad, then touch Resume to return to the home screen.
Copying 97 Copying ADF Scanner glass Use the ADF for multiple‑page documents. Use the scanner glass for single pages, small items (such as postcards or photos), transparencies, photo paper, or thin media (such as magazine clippings). Making copies Making a quick copy 1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass. Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF.
Copying 98 Copying using the scanner glass 1 Place an original document facedown on the scanner glass in the upper left corner. 2 From the home screen, navigate to: Copy > change the copy settings > Copy It 3 If you have more pages to scan, then place the next document on the scanner glass, and then touch Scan the Next Page. 4 Touch Finish the Job to return to the home screen. Copying film photos 1 Place a photo facedown on the upper left corner of the scanner glass.
Copying 99 4 Place the letterhead faceup, top edge first in the multipurpose feeder. 5 Select the size of the letterhead. 6 Navigate to: Continue > Letterhead > Continue > Copy It Customizing copy settings Copying to a different size 1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass. Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF. Place these items on the scanner glass.
Copying 100 Copying different paper sizes Use the ADF to copy original documents with different paper sizes. Depending on the paper sizes loaded and the “Copy to” and “Copy from” settings, each copy is either printed on mixed paper sizes (Example 1) or scaled to fit a single paper size (Example 2). Example 1: Copying on mixed paper sizes 1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
Copying 101 Reducing or enlarging copies Copies can be reduced to 25% of the original document size or enlarged to 400% of the original document size. The factory default setting for Scale is Auto. If you leave Scale set to Auto, the content of your original document will be scaled to fit the size of the paper onto which you are copying. To reduce or enlarge a copy: 1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
Copying 102 • Press—Use when the original document was printed using a printing press. • Other—Use when the original document was printed using an alternate or unknown printer. 7 Touch > Copy It. Collating copies If you print multiple copies of a document, then you can choose to print each copy as a set (collated) or to print the copies as groups of pages (not collated). Collated Not collated By default, Collate is set to On.
Copying 103 Copying multiple pages onto a single sheet In order to save paper, you can copy either two or four consecutive pages of a multiple‑page document onto a single sheet of paper. Notes: • The Paper Size must be set to Letter, Legal, A4, or JIS B5. • The Copy Size must be set to 100%. 1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
Copying 104 Placing information on copies Placing the date and time at the top of each page 1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass. Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF. Place these items on the scanner glass. 2 If you are loading a document into the ADF, then adjust the paper guides.
Copying 105 Canceling a copy job while pages are being printed 1 From the printer control panel, touch Cancel Job or press on the keypad. 2 Touch the job you want to cancel, and then touch Delete Selected Jobs. Note: If you press on the keypad, then touch Resume to return to the home screen. Understanding the copy screens and options Copy from This option opens a screen where you can enter the paper size of the original document. • Touch a paper size that matches the original document.
Copying 106 Darkness This option adjusts how light or dark your copies will turn out in relation to the original document. Sides (Duplex) Use this option to select duplex settings. You can print copies on one or two sides, make two-sided copies (duplex) of two-sided original documents, make two-sided copies from one-sided original documents, or make one-sided copies (simplex) from two-sided original documents.
Copying 107 Advanced Options Touching the Advanced Options button opens a screen where you can change the following settings: • Advanced Duplex—Use to specify the document orientation, whether documents are one-sided or two-sided, and how documents are bound. Note: Some Advanced Duplex options are available only on select printers.
E-mailing 108 E-mailing ADF Scanner glass Use the ADF for multiple‑page documents. Use the scanner glass for single pages, small items (such as postcards or photos), transparencies, photo paper, or thin media (such as magazine clippings). You can use the printer to e‑mail scanned documents to one or more recipients. There are three ways to send an e‑mail from the printer. You can type the e‑mail address, use a shortcut number, or use the address book.
E-mailing 109 If you do not know the IP address of the printer, you can: • View the IP address on the printer control panel in the TCP/IP section under the Networks/Ports menu. • Print a network setup page or the menu settings pages and locate the IP address in the TCP/IP section. 2 Click Settings > E-mail/FTP Settings > E-mail Settings. 3 Fill in the fields with the appropriate information. 4 Click Submit.
E-mailing 110 E-mailing a document Sending an e-mail using the touch screen 1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass. Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF. Place these items on the scanner glass. 2 If you are loading a document into the ADF, then adjust the paper guides.
E-mailing 111 4 Touch the name of the recipients. To enter additional recipients, touch Next address, and then enter the address or shortcut number you want to add, or search the address book. 5 Touch Done. Customizing e-mail settings Adding e-mail subject and message information 1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
E-mailing 112 • JPEG—Use this to create and attach a separate file for each page of your original document, viewable by most Web browsers and graphics programs. • XPS—Use this to create a single XML Paper Specification (XPS) file with multiple pages, viewable using an Internet Explorer-hosted viewer and the .NET Framework, or by downloading a third‑party standalone viewer. 5 Touch E‑mail It. Note: If you selected Secure PDF, you will be prompted to enter your password twice.
E-mailing 113 Resolution Adjusts the output quality of your e-mail. Increasing the image resolution increases the e-mail file size and the time needed to scan your original document. Image resolution can be decreased to reduce the e-mail file size. Color This option sets the output color for the scanned image. Touch to enable or disable color. Content This option lets you specify the content type and source of the original document. Choose content type from Text, Text/Photo, Photo, or Graphics.
E-mailing 114 Page Setup This option lets you change the Sides (Duplex), Orientation, and Binding. • Sides (Duplex)— Specifies if the original document is simplex (printed on one page) or duplex (printed on both sides). This also identifies what needs to be scanned for inclusion in the e-mail. • Orientation— Specifies the orientation of the original document, and then changes Sides and Binding to match the orientation.
Faxing 115 Faxing Note: The fax function is available only in select printer models. ADF Scanner glass Use the ADF for multiple‑page documents. Use the scanner glass for single pages, small items (such as postcards or photos), transparencies, photo paper, or thin media (such as magazine clippings). Getting the printer ready to fax The following connection methods may not be applicable in all countries or regions.
Faxing 116 Initial fax setup Many countries and regions require outgoing faxes to contain the following information in a margin at the top or bottom of each transmitted page, or on the first page of the transmission: station name (identification of the business, other entity, or individual sending the message) and station number (telephone number of the sending fax machine, business, other entity, or individual).
Faxing 117 2 Click Settings > Fax Settings > Analog Fax Setup. 3 In the Fax Name or Station Name field, enter the name to be printed on all outgoing faxes. 4 In the Fax Number or Station Number field, enter the printer fax number. 5 Click Submit. Choosing a fax connection Notes: • The printer is an analog device that works best when directly connected to the telephone wall outlet.
Faxing 118 Connecting to a DSL service If you subscribe to a DSL service, then contact the DSL provider to obtain a DSL filter and telephone cord, and then follow these steps to connect the equipment: 1 Connect one end of the telephone cable that came with the printer to the printer LINE port . 2 Connect the other end of the telephone cable to the DSL filter. Note: Your DSL filter may look different than the one in the illustration. 3 Connect the DSL filter cable to an active telephone wall jack.
Faxing 119 Connecting to a distinctive ring service A distinctive ring service may be available from your telephone service provider. This service allows you to have multiple telephone numbers on one telephone line, with each telephone number having a different ring pattern. This may be useful for distinguishing between fax and voice calls.
Faxing 120 Setting the outgoing fax or station name and number 1 Type the printer IP address into the address field of your Web browser. If you do not know the IP address of the printer, you can: • View the IP address on the printer control panel in the TCP/IP section under the Networks/Ports menu. • Print a network setup page or the menu settings pages and locate the IP address in the TCP/IP section. 2 Click Settings > Fax Settings > Analog Fax Setup.
Faxing 121 Configuring the printer to observe daylight saving time The printer can be set to automatically adjust for daylight saving time: 1 Type the printer IP address in the address field of your Web browser. If you do not know the IP address of the printer, then you can: • View the IP address on the printer control panel in the TCP/IP section under the Networks/Ports menu. • Print a network setup page or the menu settings pages and locate the IP address in the TCP/IP section.
Faxing 122 3 From the home screen, navigate to: Fax > enter the fax number To create a group of fax numbers, touch Next number, and then enter the next fax number. 4 Navigate to: > enter a name for the shortcut > Done > OK > Fax It Sending a fax Sending a fax using the touch screen 1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
Faxing 123 Notes: • The Fax option is available for use only with the PostScript driver or the Universal Fax Driver. For information on installing these drivers, see the Software and Documentation CD. • The Fax option must be configured and enabled in the PostScript driver under the Configuration tab before it can be used. • If the Always display settings prior to faxing check box is selected, then you are prompted to verify the recipient information before the fax is sent.
Faxing 124 Customizing fax settings Changing the fax resolution Settings range from Standard (fastest speed) to Ultra Fine (slowest speed, best quality). 1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass. Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF. Place these items on the scanner glass. 2 If you are loading a document into the ADF, then adjust the paper guides.
Faxing 125 4 Touch the arrows to adjust the time the fax will be transmitted. The time is increased or decreased in increments of 30 minutes. If the current time is shown, the left arrow is unavailable. 5 Touch Fax It. Note: The document is scanned and then faxed at the scheduled time. Viewing a fax log 1 Type the printer IP address into the address field of your Web browser.
Faxing 126 Canceling a fax after the original documents have been scanned to memory 1 On the home screen, touch Cancel Jobs. The Cancel Jobs screen appears. 2 Touch the job or jobs you want to cancel. Only three jobs appear on the screen; touch the down arrow until the job you want appears, and then touch the job you want to cancel. 3 Touch Delete Selected Jobs. The Deleting Selected Jobs screen appears, the selected jobs are deleted, and then the home screen appears.
Faxing 127 Darkness This option adjusts how light or dark your faxes will turn out in relation to the original document. Color This option enables or disables color in faxing. Page Setup This option lets you change the Sides (Duplex), Orientation, and Binding settings. • Sides (Duplex)—Use to specify if the original document is simplex (printed on one page) or duplex (printed on both sides). This also identifies what needs to be scanned for inclusion in the fax.
Faxing 128 Holding and forwarding faxes Holding faxes This option lets you hold received faxes from printing until they are released. Held faxes can be released manually or at a scheduled day or time. 1 Type the printer IP address into the address field of your Web browser. If you do not know the IP address of the printer, you can: • View the IP address on the printer control panel in the TCP/IP section under the Networks/Ports menu.
Faxing 4 From the “Forward to” menu, select one of the following: • Fax • E‑mail • FTP • LDSS • eSF 5 In the Forward to Shortcut field, enter the shortcut number where you want the fax forwarded. Note: The shortcut number must be valid for the setting selected in the “Forward to” menu. 6 Click Submit.
Scanning 130 Scanning Scanning to an FTP address ADF Scanner glass Use the ADF for multiple‑page documents. Use the scanner glass for single pages, small items (such as postcards or photos), transparencies, photo paper, or thin media (such as magazine clippings). The scanner lets you scan documents directly to a File Transfer Protocol (FTP) server. Only one FTP address may be sent to the server at a time.
Scanning 131 5 Enter the appropriate information. 6 Enter a shortcut number. If you enter a number that is already in use, then you are prompted to select another number. 7 Click Add. Creating an FTP shortcut using the touch screen 1 From the home screen, navigate to: FTP > type the FTP address > > enter a name for the shortcut > Done 2 Verify that the shortcut name and number are correct, and then touch OK. If the name or number is incorrect, then touch Cancel, and then reenter the information.
Scanning 132 3 From the home screen, navigate to: FTP > FTP > > enter the name of recipient > Browse shortcuts > name of recipient > Search Understanding FTP options FTP This option lets you enter the IP address for the FTP destination. Note: Addresses should be in dot notation form (for example: yyy.yyy.yyy.yyy). File Name This option lets you enter the file name of the scanned document. Original Size This option opens a screen where you can choose the size of the documents for FTP sending.
Scanning 133 Darkness This option adjusts how light or dark your files will turn out in relation to the original document. Page Setup This option lets you change the Sides (Duplex), Orientation, and Binding. • Sides (Duplex)— Specifies if the original document is simplex (printed on one page) or duplex (printed on both sides). This also identifies what needs to be scanned.
Scanning 134 Advanced Options Touching the Advanced Options button opens a screen where you can change the following settings: • Advanced Imaging—Use to adjust the Background Removal, Color Balance, Color Dropout, Contrast, JPEG Quality, Negative Image, Mirror Image, Scan edge to edge, Shadow Detail, Sharpness, and Temperature image output settings before sending the image. • Edge Erase—Use to eliminate smudges or information around the edges of a document.
Scanning 135 5 Enter a scan name. The scan name is the name that appears in the Scan Profile list on the display. 6 Click Submit. 7 Review the instructions on the Scan Profile screen. A shortcut number was automatically assigned when you clicked Submit. You can use this shortcut number when you are ready to scan your documents. a Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
Scanning 136 Using the ScanBack Utility You can use the Lexmark ScanBackTM Utility to create scan‑to‑PC profiles. The ScanBack Utility can be downloaded from the Lexmark Web site on http://support.lexmark.com. 1 Set up a scan‑to‑PC profile: a Launch the ScanBack Utility. b Select the printer. If no printers are listed, then contact your system support person, or click Setup to manually search for an IP address or host name.
Scanning 137 Choose content type from Text, Text/Photo, Photo, or Graphics. • Text—Use when the content of the original document is mostly text or line art. • Graphics—Use when the original document is mostly business‑type graphics such as pie charts, bar charts, and animations. • Text/Photo—Use when the original document is a mixture of text, graphics, and photos. • Photo—Use when the original document is mostly a photo or an image.
Scanning 138 • Edge Erase—Use to remove smudges or information around the edges of a document. You can choose to eliminate an equal area around all four sides of the paper, or pick a particular edge. Edge Erase will erase whatever is within the area selected, leaving nothing on that portion of the scanned image. • Transmission Log—Use to print the transmission log or transmission error log.
Understanding printer menus 139 Understanding printer menus Menus list Supplies Paper Menu Reports Settings Replace Supply Cyan Cartridge Default Source Paper Size/Type Menu Settings Page Device Statistics General Settings Copy Settings Magenta Cartridge Configure MP Network Setup Page Fax Settings Yellow Cartridge Substitute Size Network [x] Setup Page E‑mail Settings Black Cartridge Paper Texture Shortcut List FTP Settings Cyan Photoconductor Unit Paper Loading Fax Job Log Flash D
Understanding printer menus 140 Supplies menu Menu item Description Replace Supply Separator Roll and Pick Assembly Yes No Provides the option to reset the supply counter for the separator roll and pick assembly Cyan Cartridge Cartridge Nearly Low Cartridge Low Cartridge Very Low Cartridge Critically Low Invalid Replace Missing or Defective OK Unsupported Shows the status of the cyan toner cartridge Magenta Cartridge Cartridge Nearly Low Cartridge Low Cartridge Very Low Cartridge Critically Low Inva
Understanding printer menus 141 Menu item Description Black Cartridge Cartridge Nearly Low Cartridge Low Cartridge Very Low Cartridge Critically Low Invalid Replace Missing or Defective OK Unsupported Shows the status of the black toner cartridge Cyan Photoconductor Unit Early Warning Low Replace Missing OK Shows the status of the cyan photoconductor unit Magenta Photoconductor Unit Early Warning Low Replace Missing OK Shows the status of the magenta photoconductor unit Yellow Photoconductor Unit
Understanding printer menus 142 Menu item Description Hole Punch Box Near Full Replace Missing OK Shows the status of the hole punch box 160K Maintenance Kit Near End of Life End of Life OK Shows the status of the maintenance kit 320K Maintenance Kit Near End of Life End of Life OK Shows the status of the maintenance kit 480K Maintenance Kit Near End of Life End of Life OK Shows the status of the maintenance kit Paper menu Default Source menu Menu item Description Default Source Tray [x] MP Fe
Understanding printer menus 143 Paper Size/Type menu Menu item Description Tray [x] Size Letter Legal Executive JIS‑B4 A3 11 x 17 Oficio (México) Folio Statement Universal A4 A5 A6 JIS B5 Specifies the paper size loaded in each tray Tray [x] Type Plain Paper Card Stock Transparency Recycled Glossy Heavy Glossy Labels Bond Envelope Rough Envelope Letterhead Preprinted Colored Paper Light Paper Heavy Paper Rough/Cotton Paper Custom Type [x] Specifies the paper type loaded in each tray Notes: • Letter
Understanding printer menus 144 Menu item Description MP Feeder Size Letter Legal Executive JIS‑B4 A3 11 x 17 Oficio (México) Folio Statement Universal 7 3/4 Envelope 10 Envelope DL Envelope C5 Envelope Other Envelope A4 A5 A6 JIS B5 Specifies the paper size loaded in the multipurpose feeder MP Feeder Type Custom Type [x] Plain Paper Card Stock Transparency Recycled Glossy Heavy Glossy Labels Bond Envelope Rough Envelope Letterhead Preprinted Colored Paper Light Paper Heavy Paper Rough/Cotton Paper S
Understanding printer menus 145 Menu item Description Manual Paper Size Letter Legal Executive JIS‑B4 A3 11 x 17 Oficio (México) Folio Statement Universal A4 A5 A6 JIS B5 Specifies the paper size being manually loaded Manual Paper Type Plain Paper Card Stock Transparency Recycled Glossy Heavy Glossy Labels Bond Letterhead Preprinted Colored Paper Light Paper Heavy Paper Rough/Cotton Paper Custom Type [x] Specifies the paper type being manually loaded Manual Envelope Size 10 Envelope DL Envelope C5 E
Understanding printer menus 146 Configure MP menu Menu item Description Configure MP Cassette Manual Determines when the printer selects paper from the multipurpose feeder Notes: • Cassette is the factory default setting. This configures the multipurpose feeder as the automatic paper source. • Manual sets the multipurpose feeder only for manual feed print jobs.
Understanding printer menus 147 Menu item Description Glossy Texture Normal Rough Smooth Specifies the relative texture of the glossy paper loaded Heavy Glossy Texture Normal Rough Smooth Specifies the relative texture of the glossy paper loaded Labels Texture Normal Rough Smooth Specifies the relative texture of the labels loaded Bond Texture Rough Smooth Normal Specifies the relative texture of the bond paper loaded Envelope Texture Normal Rough Smooth Specifies the relative texture of the en
Understanding printer menus 148 Menu item Description Heavy Texture Normal Rough Smooth Specifies the relative texture of the paper loaded Rough/Cotton Texture Rough Specifies the relative texture of the cotton paper loaded Custom [x] Texture Normal Rough Smooth Specifies the relative texture of the custom paper loaded Note: Settings appear only if the custom type is supported. Note: Normal is the factory default setting for all paper types except bond, rough envelope and rough/cotton paper.
Understanding printer menus 149 Menu item Description Letterhead Loading Off Duplex Determines whether 2‑sided printing occurs for all print jobs that specify Letterhead as the paper type Preprinted Loading Off Duplex Determines whether 2‑sided printing occurs for all print jobs that specify Preprinted as the paper type Colored Loading Off Duplex Determines whether 2‑sided printing occurs for all print jobs that specify Colored as the paper type Light Loading Off Duplex Determines whether 2‑sided
Understanding printer menus 150 Custom Types menu Menu item Description Custom Type [x] Paper Card Stock Letterhead Transparency Glossy Rough/Cotton Labels Bond Envelope Associates a paper or specialty media type with a factory default Custom Type [x] name or a user‑defined custom name created from the Embedded Web Server or from MarkVisionTM Professional Recycled Paper Card Stock Letterhead Transparency Glossy Rough/Cotton Labels Bond Envelope Specifies a paper type when the Recycled setting is sele
Understanding printer menus 151 Custom Scan Sizes menu Menu item Description Custom Scan Size [x] Scan Size Name Width 1–11.69 inches (25–297 mm) Height 1–17 inches (25–432 mm) Orientation Portrait Landscape 2 scans per side Off On Specifies a custom scan size name, scan sizes, and options. The custom scan size name replaces Custom Scan Size [x] in the printer menus. Notes: • 11.69 inches is the US factory default setting for Width.
Understanding printer menus 152 Menu item Description Feed Direction Short Edge Long Edge Specifies the feed direction Notes: • Short Edge is the factory default setting. • Long Edge appears only if the longest edge is shorter than the maximum width supported by the tray.
Understanding printer menus 153 Menu item Description Assign Type/Bin Plain Paper Bin Card Stock Bin Transparency Bin Recycled Bin Glossy Bin Heavy Glossy Bin Labels Bin Bond Bin Envelope Bin Rough Envelope Bin Letterhead Bin Preprinted Bin Colored Bin Light Paper Bin Heavy Paper Bin Rough/Cotton Bin Custom [x] Bin Selects an exit bin for each supported paper type Available selections for each type are: Disabled Standard Bin Bin [x] Note: Disabled is the factory default setting.
Understanding printer menus 154 Menu item Description Fax Job Log Prints a report containing information about the last 200 completed faxes Note: This menu item is available only when Enable Job Log is set to On in the Fax Settings menu. Fax Call Log Prints a report containing information about the last 100 attempted, received, and blocked calls Note: This menu item is available only when Enable Job Log is set to On in the Fax Settings menu.
Understanding printer menus 155 Menu item Description PCL SmartSwitch On Off Sets the printer to automatically switch to PCL emulation when a print job requires it, regardless of the default printer language Notes: • On is the factory default setting. • When Off is used, the printer does not examine incoming data. The printer uses PostScript emulation if PS SmartSwitch is set to On. It uses the default printer language specified in the Setup menu if PS SmartSwitch is set to Off.
Understanding printer menus 156 Menu item Description Mac Binary PS Auto On Off Sets the printer to process Macintosh binary PostScript print jobs Standard Network Setup Reports Network Card TCP/IP IPv6 Wireless AppleTalk Displays and sets the printer network settings. Notes: • Auto is the factory default setting. • Off filters print jobs using the standard protocol. • On processes raw binary PostScript print jobs.
Understanding printer menus 157 Menu item Description Network Address UAA LAA Lets you view the network addresses Job Timeout Sets the amount of time in seconds before a network print job is canceled 0 Note: 90 seconds is the factory default setting. 10–225 Banner Page Allows the printer to print a banner page Off Note: Off is the factory default setting.
Understanding printer menus 158 Menu item Description Enable FTP/TFTP Yes No Enables the built-in FTP server, which allows you to send files to the printer using File Transfer Protocol. Enable HTTP Server Yes No Enables the built-in web server (Embedded Web Server). When enabled, the printer can be monitored and managed remotely using a web browser.
Understanding printer menus 159 Wireless menu Use the following menu items to view or configure the wireless internal print server settings. Note: This menu is available only in printer models connected to a wireless network.
Understanding printer menus 160 Menu item Description Activate Yes No Activates AppleTalk support View Name Shows the assigned AppleTalk name Note: Yes is the factory default setting. Note: The name can be changed only from the Embedded Web Server. View Address Shows the assigned AppleTalk address Note: The address can be changed only from the Embedded Web Server.
Understanding printer menus 161 Menu item Description USB Buffer Auto 3KB to [maximum size allowed] Disabled Sets the size of the USB input buffer Notes: • Auto is the factory default setting. • Disabled turns off job buffering. Any jobs already buffered on the printer hard disk are printed before normal processing resumes. • The USB buffer size value can be changed in 1-KB increments.
Understanding printer menus 162 Parallel [x] menu Menu item Description PCL SmartSwitch On Off Sets the printer to automatically switch to PCL emulation when a print job received through a serial port requires it, regardless of the default printer language Notes: • On is the factory default setting. • When set to Off, the printer does not examine incoming data. The printer uses PostScript emulation if PS SmartSwitch is set to On.
Understanding printer menus 163 Menu item Description Job Buffering Off On Auto Temporarily stores print jobs on the printer hard disk before printing Notes: • Off is the factory default setting. • On buffers print jobs on the printer hard disk. • Auto buffers print jobs only if the printer is busy processing data from another input port. • Changing this setting from the printer control panel and then exiting the menus causes the printer to restart. The menu selection is then updated.
Understanding printer menus 164 Menu item Description ENA gateway yyy.yyy.yyy.yyy Sets the gateway information for an external print server Note: This menu item is available only if the printer is attached to an external print server through the USB port.
Understanding printer menus 165 Menu item Description Serial Buffer Auto 3KB to [maximum size allowed] Disabled Sets the size of the serial input buffer Notes: • Auto is the factory default setting. • Disabled turns off job buffering. Any jobs already buffered on the disk are printed before normal processing is resumed. • The serial buffer size setting can be changed in 1‑KB increments.
Understanding printer menus 166 Menu item Description Baud 9600 19200 38400 57600 115200 138200 172800 230400 345600 1200 2400 4800 Specifies the rate at which data can be received through the serial port Data Bits 8 7 Specifies the number of data bits sent in each transmission frame Parity None Ignore Even Odd Sets the parity for serial input and output data frames Honor DSR Off On Determines whether the printer uses the DSR Signal Notes: • 9600 is the factory default setting.
Understanding printer menus 167 Menu item Description Use SSL Disabled Negotiate Required Sets the printer to use SSL for increased security when connecting to the SMTP server Notes: • Disabled is the factory default setting. • When the Negotiate setting is used, the SMTP server determines if SSL will be used.
Understanding printer menus 168 Miscellaneous Security Settings menu Menu item Description Login Restrictions Login failures Failure time frame Lockout time Panel Login Timeout Remote Login Timeout Limits the number and time frames of failed login attempts from the printer control panel before all users are locked out Notes: • “Login failures” specifies the number of failed login attempts before users are locked out. Settings range from 1–10 attempts is the factory default setting.
Understanding printer menus 169 Confidential Print menu Menu item Description Max Invalid PIN Off 2–10 Limits the number of times an invalid PIN can be entered Notes: • This menu appears only if a formatted, non-defective printer hard disk is installed. • Once the limit is reached, the print job for that user name and that PIN are deleted.
Understanding printer menus 170 Menu item Description Wiping Mode Auto Manual Off Specifies the mode for disk wiping Scheduled Wiping Time Day Sets the schedule for disk wiping Note: Auto is the factory default setting. The printer determines when to initiate a disk wipe. Notes: • Time is used to set the time for scheduled wiping. • Day is used to set the specific day or period for scheduled wiping. Values are Sunday to Friday, Everyday, Weekdays, and Weekends.
Understanding printer menus 171 Security Audit Log menu Menu item Description Export Log Enables an authorized user to export the security log Notes: • To export the log from the printer control panel, a flash drive must be attached to the printer. • From the Embedded Web Server, the log can be downloaded to a computer. Delete Log Yes No Specifies whether audit logs are deleted Note: Yes is the factory default setting.
Understanding printer menus 172 Menu item Description Custom Time Zone Setup DST Start Week DST Start DayOff DST Start Month DST Start Time DST End Week DST End Day DST End Month DST End Time DST Offset Enables the user to set up the time zone Enable NTP On Off Enables Network Time Protocol, which synchronizes the clocks of devices on a network NTP Server Lets you view the NTP Server Address Enable Authentication Off On Lets you change the authentication setting to on or off Note: On is the fact
Understanding printer menus 173 Settings menu General Settings menu Menu item Description Display Language English Francais Deutsch Italiano Espanol Greek Dansk Norsk Nederlands Svenska Portuguese Suomi Russian Polski Magyar Turkce Cesky Simplified Chinese Traditional Chinese Korean Japanese Sets the language of the text appearing on the display Eco-Mode Off Energy Energy/Paper Paper Minimizes the use of energy, paper, or specialty media Note: All languages may not be available for all printers.
Understanding printer menus 174 Menu item Description Quiet Mode Off On Reduces the amount of noise produced by the printer Notes: • Off is the factory default setting. This setting supports the performance specifications for your printer. • “On” configures the printer to produce as little noise as possible. This setting is best suited for printing text and line art. • For optimal printing of color‑rich documents, set Quiet Mode to Off.
Understanding printer menus 175 Menu item Description Keyboard Keyboard Type English Francais Francais Canadien Deutsch Italiano Espanol Greek Dansk Norsk Nederlands Svenska Suomi Portuguese Russian Polski Swiss German Swiss French Turkce Korean Custom Key [x] Accents/Symbols Tab On Off Russian/Polish Tab On Off Korean Tab On Off Specifies a language and custom key information for the printer control panel keyboard.
Understanding printer menus 176 Menu item Description Displayed Information Left side Right side Custom Text [x] [text entry] [x] Cartridge [x] Photoconductor Fuser Transfer Module Specifies what is displayed on the upper left and right corners of the home screen For the Left side and Right side menus, choose from the following options: None IP Address Hostname Contact Name Location Date/Time mDNS/DDNS Service Name Zero Configuration Name Cartridge Level Custom Text [x] For [x] Cartridge, [x] Photocond
Understanding printer menus 177 Menu item Description Displayed Information (continued) Waste Toner Bottle Paper Jam Load Paper Service Errors Specifies what is displayed for Paper Jam, Load Paper, and Service Errors. Available options for each button are: Activate Yes No Type of Message to Display Default Alternate Default Message [text entry] Alternate Message [text entry] Notes: • No is the factory default setting for Activate.
Understanding printer menus 178 Menu item Description One Page Copy On Off Sets copies from the scanner glass to only one page at a time Output Lighting Standard Bin LED Normal/Standby Mode Bright Dim Off Sets the amount of light from the standard bin or an optional exit bin Power Saver Bright Dim Off Output Option Bin LEDs Normal/Standby Mode Bright Dim Off Power Saver Bright Dim Off Audio Feedback Button Feedback On Off Volume 1–10 Note: Off is the factory default setting.
Understanding printer menus 179 Menu item Description Scanner Jam Recovery Job level Page level Specifies how a scanned job should be reloaded if a paper jam occurs in the ADF Notes: • Job level is the factory default setting. • If Job level is selected, then the entire job must be rescanned if any pages jam. • If Page level is selected, then rescan from the jammed page forward.
Understanding printer menus 180 Menu item Description Timeouts Sleep Mode 2–240 Sets the amount of time the printer waits after a job is printed before it goes into a reduced power state Notes: • 30 minutes is the factory default setting. • Lower settings conserve more energy, but may require longer warm‑up times. • Select the lowest setting if the printer shares an electrical circuit with room lighting or you notice lights flickering in the room.
Understanding printer menus 181 Menu item Description Print Recovery Jam Recovery Auto On Off Specifies whether the printer reprints jammed pages Notes: • Auto is the factory default setting. The printer reprints jammed pages unless the memory required to hold the pages is needed for other printer tasks. • On sets the printer to always reprint jammed pages. • Off sets the printer to never reprint jammed pages.
Understanding printer menus 182 Menu item Description Factory Defaults Do Not Restore Restore Now Returns the printer settings to the factory default settings Notes: • Do Not Restore is the factory default setting. Do Not Restore keeps the user‑defined settings. • Restore Now returns all printer settings to the factory default settings except Network/Ports menu settings. All downloads stored in RAM are deleted. Downloads stored in flash memory or on a printer hard disk are not affected.
Understanding printer menus 183 Menu item Description Sides (Duplex) 1 sided to 1 sided 1 sided to 2 sided 2 sided to 1 sided 2 sided to 2 sided Specifies whether an original document is duplex (two‑sided) or simplex (one-sided), and then specifies whether the copy should be duplex or simplex Notes: • 1 sided to 1 sided—The original document has print on one side and the copy will also have print on one side.
Understanding printer menus 184 Menu item Description Original Size Letter Legal Executive Tabloid Folio Statement Universal 4 x 6 in. 3 x 5 in.
Understanding printer menus 185 Menu item Description Output Bin Standard Bin Bin [x] Specifies the exit bin to be used for the copy job Number of Copies 1–999 Specifies the number of copies for the copy job Header/Footer [Location] Off Date/Time Page number Custom text Print on All pages First page only All but first page Custom text Specifies header/footer information and its location on the page Overlay Off Confidential Copy Draft Urgent Custom Specifies the overlay text printed on each page o
Understanding printer menus 186 Menu item Description Auto Center Off On Lets you automatically center the content on the page Color Balance Cyan - Red Magenta - Green Yellow - Blue Enables an equal balance of colors in the output Color Dropout Color Dropout None Red Green Blue Default Red Threshold 0–255 Default Green Threshold 0–255 Default Blue Threshold 0–255 Specifies which color to drop during copies, and how much to increase or decrease the dropout Contrast Best for content 0–5 Specifies t
Understanding printer menus 187 Fax Settings menu Fax Mode (Analog Fax Setup) menu Analog Fax Setup mode sends the fax job by way of a telephone line.
Understanding printer menus 188 Menu item Description Fax Cover Page Fax Cover Page Off by default On by default Never use Always use Include to field On Off Include from field Off On From Include Message field Off On Message Include Logo Off On Include Footer [x] Footer [x] Configures the fax cover page Menu item Description Resolution Standard Fine 200 dpi Super Fine 300 dpi Ultra Fine 600 dpi Specifies quality in dots per inch (dpi).
Understanding printer menus 189 Menu item Description Original Size Mixed Sizes Letter Legal Executive Tabloid Folio Statement Universal 4 x 6 in. 3 x 5 in. Business Card Custom Scan Size [x] A3 A4 A5 Oficio (Mexico) A6 JIS B4 JIS B5 Book Original Auto Size Sense Specifies the paper size of the original document Sides (Duplex) Off Long edge Short edge Specifies how text and graphics are oriented on a page Note: Mixed Sizes is the US factory default setting.
Understanding printer menus 190 Menu item Description Darkness 1–9 Lightens or darkens the output Dial Prefix Lets you enter a dialing prefix, such as 99. A numeric entry field is provided.
Understanding printer menus 191 Menu item Description Background Removal ‑4 to 4 Adjusts the amount of background visible on a scanned image Color Balance Cyan - Red Magenta - Green Yellow - Blue Enables an equal balance of colors in the scanned image Color Dropout Color Dropout None Red Green Blue Default Red Threshold 0–255 Default Green Threshold 0–255 Default Blue Threshold 0–255 Specifies which color to drop, and how much to increase or decrease the dropout Contrast Best for content 0–5 Spec
Understanding printer menus Menu item 192 Description Auto Convert Color Faxes to Mono Converts all outgoing faxes to black and white Faxes Note: On is the factory default setting.
Understanding printer menus 193 Menu item Description Max Speed 2400 4800 9600 14400 33600 Specifies the maximum speed in baud at which faxes are received Fax Forwarding Print Print and Forward Forward Enables forwarding of received faxes to another recipient Forward to Fax E‑mail FTP LDSS eSF Specifies the type of recipient to which faxes will be forwarded Forward to Shortcut Lets you enter the shortcut number which matches the recipient type (Fax, E-mail, FTP, LDSS, or eSF) Block No Name Fax O
Understanding printer menus 194 Menu item Description Transmission Log Print log Do not print log Print only for error Enables printing of a transmission log after each fax job Receive Error Log Print Never Print on Error Enables printing of a receive error log following a receive error Auto Print Logs On Off Enables automatic printing of fax logs Log Paper Source Tray [x] Manual Feeder Specifies the source of the paper used for printing logs Logs Display Remote Fax Name or Remote Station Name D
Understanding printer menus Menu item All Rings Single Ring Only Double Ring Only Triple Ring Only Single or Double Rings Only Single or Triple Rings Only Double or Triple Rings Only 195 Description Specifies ring patterns when device is answering calls Note: All Rings is the factory default setting. Fax Mode (Fax Server Setup) menu Fax Server mode sends the fax job to a fax server for transmission.
Understanding printer menus 196 Menu item Description Darkness 1–9 Lightens or darkens the output Orientation Portrait Landscape Specifies the orientation of the scanned image Original Size Letter Legal Executive Tabloid Folio Statement Universal 4 x 6 in. 3 x 5 in. Business Card Custom Scan Size [x] A3 A4 A5 Oficio (Mexico) JIS B4 JIS B5 Book Original Auto Size Sense Specifies the paper size of the document that is being scanned Note: 5 factory default setting.
Understanding printer menus 197 E‑mail Settings menu Menu item Description E‑mail Server Setup Subject Message Base file name Specifies e‑mail server information E‑mail Server Setup Send me a copy Never appears On by default Off by default Always On Sends a copy of the e-mail back to the sender E‑mail Server Setup Max E‑mail size 0–65535 KB Specifies the maximum e-mail size in kilobytes E‑mail Server Setup Size error message Sends a message when an e-mail is greater than the configured size limit
Understanding printer menus 198 Menu item Description Content Type Text/Photo Photo Text Graphics Specifies the content of the original document Content Source Color Laser Inkjet Photo/Film Magazine Newspaper Press Other Black and White Laser Specifies how the original document was produced Color On Off Specifies whether or not copies are printed in color Resolution 150 dpi 200 dpi 300 dpi 400 dpi 600 dpi 75 dpi Specifies the resolution of the scan in dots per inch Darkness 1–9 Lightens or dark
Understanding printer menus 199 Menu item Description Original Size Letter Legal Executive Tabloid Folio Statement Universal 4 x 6 in. 3 x 5 in. Business Card Custom Scan Size [x] A3 A4 A5 Oficio (Mexico) A6 JIS B4 JIS B5 Book Original Auto Size Sense Mixed Sizes Specifies the paper size of the document being scanned Sides (Duplex) Off Long edge Short edge Specifies how the text and graphics are oriented on the page Notes: • A4 is the international factory default setting.
Understanding printer menus 200 Menu item Description E‑mail images sent as Attachment Web Link Specifies how the images will be sent Use Multi‑Page TIFF On Off Provides a choice between single-page TIFF files and multiple‑page TIFF files. For a multiple-page scan‑to‑e-mail job, either one TIFF file is created containing all the pages, or multiple TIFF files are created with one file for each page of the job. Note: Attachment is the factory default setting.
Understanding printer menus 201 Menu item Description Color Dropout Color Dropout None Red Green Blue Default Red Threshold 0–255 Default Green Threshold 0–255 Default Blue Threshold 0–255 Specifies which color to drop during scanning, and how much to increase or decrease the dropout Contrast Best for content 0–5 Specifies the contrast of the output Mirror Image Off On Creates a mirror image of the original document Negative Image Off On Creates a negative image of the original document Shadow D
Understanding printer menus 202 FTP Settings menu Menu item Description Format PDF (.pdf) Secure PDF (.pdf) TIFF (.tif) JPEG (.jpg) XPS (.xps) Specifies the format of the FTP file PDF Version 1.2–1.
Understanding printer menus 203 Menu item Description Original Size Letter Legal Executive Tabloid Folio Statement Universal 4 x 6 in. 3 x 5 in. Business Card Custom Scan Size [x] A3 A4 A5 Oficio (Mexico) A6 JIS B4 JIS B5 Book Original Auto Size Sense Mixed Sizes Specifies the paper size of the original document Sides (Duplex) Off Long edge Short edge Specifies how the text and graphics are oriented on the page Notes: • Letter is the US factory default setting.
Understanding printer menus 204 Menu item Description Photo Default 5–90 Sets the quality of a photo image in relation to file size and the quality of the image Use Multi‑Page TIFF On Off Provides a choice between single-page TIFF files and multiple‑page TIFF files. For a multiple-page scan‑to‑FTP job, either one TIFF file is created containing all the pages, or multiple TIFF files are created with one file for each page of the job. Note: 50 is the factory default setting.
Understanding printer menus 205 Menu item Description Color Dropout Color Dropout None Red Green Blue Default Red Threshold 0–255 Default Green Threshold 0–255 Default Blue Threshold 0–255 Specifies which color to drop during scanning, and how much to increase or decrease the dropout Contrast 0–5 Best for content Specifies the contrast of the output Mirror Image Off On Creates a mirror image of the original document Negative Image Off On Creates a negative image of the original document Shadow D
Understanding printer menus 206 Flash Drive menu Scan Settings Menu item Description Format PDF (.pdf) Secure PDF TIFF (.tif) JPEG (.jpg) XPS (.xps) Specifies the format of the file to be sent through FTP PDF Version 1.2–1.
Understanding printer menus 207 Menu item Description Original Size Letter Legal Executive Tabloid Folio Statement Universal 4 x 6 in. 3 x 5 in. Business Card Custom Scan Size [x] A3 A4 A5 Oficio (Mexico) A6 JIS B4 JIS B5 Book Original Auto Size Sense Mixed Sizes Specifies the paper size of the original document Sides (Duplex) Off Long edge Short edge Specifies how the text and graphics are oriented on a page Note: Letter is the US factory default setting.
Understanding printer menus 208 Menu item Description Use Multi‑Page TIFF On Off Provides a choice between single-page TIFF files and multiple‑page TIFF files. For a multiple-page scan to FTP job, either one TIFF file is created containing all the pages, or multiple TIFF files are created with one file for each page. Notes: • On is the factory default setting. • This menu applies to all scan functions.
Understanding printer menus 209 Menu item Description Negative Image Off On Creates a negative image of the original document Shadow Detail ‑4 to 4 Adjusts the amount of shadow detail visible on a scanned image Scan edge to edge Off On Specifies whether the original document is scanned edge-to-edge Sharpness 1–5 Adjusts the amount of sharpness on a scanned image Temperature ‑4 to 4 Enables the user to specify “warm” or “cool” outputs.
Understanding printer menus 210 Hole Punch Off On Specifies whether prints have punched holes Hole Punch Mode 2 holes 3 holes 4 holes Determines the type of punch finishing performed on prints Duplex Binding Long Edge Short Edge Defines the way duplexed pages are bound and how the printing on the back of the page is oriented in relation to the printing on the front of the page Notes: • Off is the factory default setting. • This menu appears only when a puncher is installed.
Understanding printer menus Separator Sheets Off Between Copies Between Jobs Between Pages 211 Specifies whether blank separator sheets are inserted Notes: • Off is the factory default setting. • Between Copies inserts a blank sheet between each copy of a print job if Collate is set to On. If Collate is set to Off, then a blank page is inserted between each set of printed pages, such as after all page 1's and after all page 2's. • Between Jobs inserts a blank sheet between print jobs.
Understanding printer menus 212 Menu item Description Print Area Normal Whole Page Sets the logical and physical printable area Notes: • Normal is the factory default setting. When attempting to print data in the non‑printable area defined by the Normal setting, the printer clips the image at the boundary. • Whole Page allows the image to be moved into the non‑printable area defined by the Normal setting, but the printer will clip the image at the Normal setting boundary.
Understanding printer menus 213 Job Accounting menu Note: This menu item appears only if a formatted, non-defective printer hard disk is installed. The printer hard disk cannot be read/write‑ or write‑protected.
Understanding printer menus 214 Menu item Description E‑mail Address to Send Logs Specifies the e‑mail address to which the device sends job accounting logs Log File Prefix Note: The current host name defined in the TCP/IP menu is used as the default log file prefix. Finishing menu Menu item Description Sides (Duplex) 1 sided 2 sided Specifies whether duplex (2‑sided) printing is set as the default setting for all print jobs Notes: • 1 sided is the factory default setting.
Understanding printer menus 215 Menu item Description Separator Sheets Off Between Copies Between Jobs Between Pages Specifies whether blank separator sheets are inserted Notes: • Off is the factory default setting. • Between Copies inserts a blank sheet between each copy of a print job if Collate is set to On. If Collate is set to Off, then a blank page is inserted between each set of printed pages, such as after all page 1's and after all page 2's.
Understanding printer menus 216 Menu item Description Staple Job Off Auto Back Dual Dual Double Front Specifies whether the prints are stapled Hole Punch Off On Specifies whether the prints have punched holes Hole Punch Mode 2 holes 3 holes 4 holes Determines the type of punch finishing performed on a printed output Notes: • Off is the factory default setting. • This menu appears only when a stapler is installed. Note: This menu appears only when a puncher is installed.
Understanding printer menus 217 Menu item Description Color Correction Auto Off Manual Adjusts the color output on the printed page Notes: • Auto is the factory default setting. Auto applies different color conversion tables to each object on the printed page. • Manual allows customization of color tables using the settings available from the Manual Color menu.
Understanding printer menus 218 Menu item Description RGB Contrast 0–5 Adjusts contrast in color outputs Notes: • 0 is the factory default setting. • This does not affect files where CMYK color specifications are used. RGB Saturation 0–5 Adjusts saturation in color outputs Notes: • 0 is the factory default setting. • This does not affect files where CMYK color specifications are used.
Understanding printer menus 219 Menu item Description Manual Color RGB Image Vivid sRGB Display Display—True Black sRGB Vivid Off RGB Text Vivid sRGB Display Display—True Black sRGB Vivid Off RGB Graphics Vivid sRGB Display Display—True Black sRGB Vivid Off Customizes the RGB color conversions Manual Color CMYK Image US CMYK Euro CMYK Vivid CMYK Off CMYK Text US CMYK Euro CMYK Vivid CMYK Off CMYK Graphics US CMYK Euro CMYK Vivid CMYK Off Customizes the CMYK color conversions Spot Color Replacement
Understanding printer menus 220 Utilities menu Menu item Description Remove Held Jobs Confidential Held Not Restored All Removes confidential and held jobs from the printer hard disk Notes: • Selecting a setting affects only print jobs that are resident in the printer. Bookmarks, print jobs on flash drives, and other types of held jobs are not affected. • Not Restored removes all Print and Hold jobs that are not restored from the printer hard disk or memory.
Understanding printer menus 221 XPS menu Menu item Description Print Error Pages Off On Prints a page containing information on errors, including XML markup errors Note: Off is the factory default setting. PDF menu Menu item Description Scale to Fit No Yes Scales page content to fit the selected paper size Annotations Do Not Print Print Prints annotations in a PDF Note: No is the factory default setting. Note: Do Not Print is the factory default setting.
Understanding printer menus 222 PCL Emul menu Menu item Description Font Source Resident Disk Download Flash All Specifies the set of fonts used by the Font Name menu item Notes: • Resident is the factory default setting. It shows the factory default set of fonts downloaded in RAM. • Flash and Disk settings show all fonts resident in that option. Make sure the flash option is properly formatted and is not read/write‑, or password‑protected. • Download shows all the fonts downloaded in RAM.
Understanding printer menus 223 Menu item Description PCL Emulation Settings Orientation Portrait Landscape Specifies the orientation of text and graphics on a page PCL Emulation Settings Lines per Page 1–255 Specifies the number of lines that print on each page Notes: • Portrait is the factory default setting. • Portrait prints text and graphics parallel to the short edge of the page. • Landscape prints text and graphics parallel to the long edge of the page.
Understanding printer menus 224 Menu item Description Tray Renumber View Factory Defaults MPF Default = 8 T1 Default = 1 T2 Default = 4 T3 Default = 5 T4 Default = 20 T5 Default = 21 Env Default = 6 MPaper Default = 2 MEnv Default = 3 Displays the factory default setting assigned to each tray, drawer, or feeder Tray Renumber Restore Defaults Yes No Returns all tray, drawer, and feeder assignments to the factory default settings HTML menu Menu Item Font Name Albertus MT Antique Olive Apple Chancery A
Understanding printer menus 225 Menu item Description Font Size 1–255 pt Sets the default font size for HTML documents Notes: • 12 pt is the factory default setting. • Font size can be increased in 1‑point increments. Scale 1–400% Scales the default font for HTML documents Notes: • 100% is the factory default setting. • Scaling can be increased in 1% increments.
Understanding printer menus 226 Menu item Description Orientation Portrait Landscape Rev Portrait Rev Landscape Sets the image orientation Note: Portrait is the factory default setting. Booklet Adjustments menu The Booklet Adjustments menu is available only when a booklet finisher is installed. You can select various adjustments from this menu when printing booklets. To access the Booklet Adjustments menu: 1 Turn off the printer. 2 Hold down and 6 MNO while turning on the printer.
Understanding printer menus 227 Help menu The Help menu consists of a series of Help pages that are stored in the multifunction printer (MFP) as PDF files. They contain information about using the printer and performing various tasks, including copying, scanning, and faxing. English, French, German, and Spanish translations are stored in the printer. Other translations are available on the Lexmark Web site at www.lexmark.com.
Securing the hard disk and other installed memory 228 Securing the hard disk and other installed memory Statement of Volatility Your printer contains various types of memory that are capable of storing device and network settings, information from embedded solutions, and user data. The types of memory—along with the types of data stored by each—are described below. • Volatile memory—Your device utilizes standard Random Access Memory (RAM) to temporarily buffer user data during simple print and copy jobs.
Securing the hard disk and other installed memory 229 Erasing non‑volatile memory • Individual settings, device and network settings, security settings, and embedded solutions—Erase information and settings by selecting Wipe All Settings in the Configuration menu. • Fax data—Erase fax settings and data by selecting Wipe All Settings in the Configuration menu. 1 Turn off the printer. 2 Hold down and 6 MNO while turning the printer on.
Securing the hard disk and other installed memory 230 Configuring printer hard disk encryption Note: Your printer may not have a hard disk installed. Enabling hard disk encryption helps prevent the loss of sensitive data in the event your printer or its hard disk is stolen. Using the Embedded Web Server 1 From the Embedded Web Server, click Settings > Security > Disk Encryption. Note: Disk Encryption appears in the Security Menu only when a formatted, non‑defective printer hard disk is installed.
Maintaining the printer 231 Maintaining the printer Periodically, certain tasks are required to maintain optimum performance of your printer. Cleaning the exterior of the printer 1 Make sure that the printer is turned off and unplugged from the wall outlet. CAUTION—SHOCK HAZARD: To avoid the risk of electric shock when cleaning the exterior of the printer, unplug the power cord from the wall outlet and disconnect all cables to the printer before proceeding. 2 Remove paper from the standard exit bin.
Maintaining the printer 232 Cleaning the scanner glass Clean the scanner glass if you encounter print quality problems, such as streaks on copied or scanned images. 1 Slightly dampen a soft, lint-free cloth or paper towel with water. 2 Open the scanner cover. 1 2 4 1 White underside of the ADF cover 2 White underside of the scanner cover 3 Scanner glass 4 ADF glass 3 Wipe the areas shown and let them dry. 4 Close the scanner cover.
Maintaining the printer 233 Cleaning the printhead lenses Clean the printhead lenses when you encounter print quality problems. 1 Open the front door. 2 Slide the release lever to the left to unlock the cover. 3 Open the cover. Warning—Potential Damage: To avoid overexposing the photoconductor unit, do not leave the cover open for more than 10 minutes.
Maintaining the printer 4 Locate the printhead wipers.
Maintaining the printer 235 5 Gently pull the printhead wipers out until it stops, and then slowly slide them back into place. 3x 6 Close the cover.
Maintaining the printer 7 Slide the release lever to the right to lock the cover. 8 Close the front door.
Maintaining the printer Emptying the hole punch box 1 Open door G. 2 Pull out the hole punch box.
Maintaining the printer 238 3 Empty the container. 4 Insert the emptied hole punch box back into the finisher until it stops. 5 Close door G. Storing supplies Choose a cool, clean storage area for the printer supplies. Store supplies right side up in their original packing until you are ready to use them.
Maintaining the printer 239 • Corrosive gases • Heavy dust Checking the status of parts and supplies A message appears on the display when a replacement supply item is needed or when maintenance is required. Checking the status of parts and supplies on the printer control panel From the home screen, touch Status/Supplies > View Supplies. Checking the status of parts and supplies from a network computer Note: The computer must be connected to the same network as the printer.
Maintaining the printer 240 Part name Part number Cyan high‑yield toner cartridge X950X2CG Ordering a photoconductor unit When 84.xx [Color] photoconductor low or 84.xx [Color] photoconductor nearly low appears, order a replacement photoconductor unit. When 84.xx Replace [color] photoconductor appears, replace the specified photoconductor.
Maintaining the printer 241 Maintenance kit Service part number 160K Maintenance Kit 40X7540 200K ADF Maintenance Kit 40X7530 320K (100 V) Maintenance Kit 40X7568 320K (110 V) Maintenance Kit 40X7550 320K (220 V) Maintenance Kit 40X7569 480K Maintenance Kit 40X7560 Replacing parts and supplies Replacing a maintenance kit 1 Replace the maintenance kit. 2 Reset the maintenance count to zero to clear the 80 scheduled maintenance [x] message.
Maintaining the printer 242 2 Rotate the release lever counterclockwise to open the cover. 3 Lower the cover. Warning—Potential Damage: To avoid overexposing the photoconductor unit, do not leave the door open for more than 10 minutes.
Maintaining the printer 4 Grasp the handle of the photoconductor unit and pull it out of the machine. 5 Unpack the replacement photoconductor unit. 6 Align and insert the end of photoconductor unit.
Maintaining the printer 7 Remove the tape from the top of the photoconductor unit. 8 Push the tab forward to insert the photoconductor unit.
Maintaining the printer 245 9 Push the photoconductor unit until it clicks into place 10 Gently pull the printhead wipers out until it stops, and then slowly slide them back into place.
Maintaining the printer 11 Close the cover. 12 Rotate the release lever clockwise to lock the cover.
Maintaining the printer 13 Close the front door. Replacing a toner cartridge 1 Open the front door. 2 Put your hand under the dent of the toner cartridge, and then slightly lift up the cartridge.
Maintaining the printer 248 3 Pull out the toner cartridge. 4 Unpack the replacement toner cartridge, and then shake it front‑to‑back and side‑to‑side to evenly distribute the toner. 5 Remove the red packing strip from the new cartridge. 6 Insert the new cartridge into the printer.
Maintaining the printer 7 Close the front door. Replacing the waste toner bottle 1 Turn the printer off. 2 Open the front door. 3 Remove the used waste toner bottle.
Maintaining the printer 4 Unpack the new waste toner bottle. 5 Insert the new waste toner bottle into the printer until it clicks into place. 6 Rotate the release lever counterclockwise to open the cover.
Maintaining the printer 251 7 Lower the cover. 8 Slide out the printhead wipers.
Maintaining the printer 9 Slide the printhead wipers back into place. 10 Close the cover.
Maintaining the printer 11 Rotate the release lever clockwise to lock the cover. 12 Close the front door. 13 Turn the printer back on.
Maintaining the printer Replacing a staple cartridge Note: A message on the printer display indicates which staple cartridge needs to be replaced. Replacing staple cartridge in the standard stapler unit 1 Open door G. 2 Grasp the handle of the staple cartridge holder, and then pull out the holder to the right. 3 Pull the staple cartridge out of the finisher. Note: Use just a slight force when removing the staple cartridge.
Maintaining the printer 255 4 Squeeze both sides of the empty staple case with your fingers, and then remove the staple case from the cartridge. 2 1 1 5 Insert the front side of the new staple case into the staple cartridge, and then push the rear side into the cartridge.
Maintaining the printer 6 Push the staple cartridge into the finisher until it clicks into place. 7 Close door G. Replacing staple cartridge in the booklet stapler unit Note: This task is applicable only when a booklet finisher is installed. 1 Open door G.
Maintaining the printer 257 2 Press the handles of the staple cartridge to the right, and then take the staple cartridge unit out of the finisher.
Maintaining the printer 3 Hold the tabs on both sides of the staple cartridge.
Maintaining the printer 4 Rotate the booklet staple cartridge at an angle.
Maintaining the printer 260 5 Lift the booklet staple cartridge out of the unit. 6 Squeeze both sides of the empty staple case with your fingers, and then remove the staple case from the cartridge. 2 1 1 7 Insert the front side of the new staple case into the staple cartridge, and then push the rear side into the cartridge.
Maintaining the printer 8 Return the cartridge to its original position, and then gently push the cartridge in until it clicks into place. 9 Return the unit to its original position. 10 Close door G.
Maintaining the printer 262 Moving the printer Before moving the printer CAUTION—POTENTIAL INJURY: The printer weight is greater than 18 kg (40 lb) and requires two or more trained personnel to lift it safely. CAUTION—POTENTIAL INJURY: Before moving the printer, follow these guidelines to avoid personal injury or printer damage: • Turn the printer off using the power switch, and then unplug the power cord from the wall outlet. • Disconnect all cords and cables from the printer before moving it.
Administrative support 263 Administrative support Finding advanced networking and administrator information This chapter covers basic administrative support tasks using the Embedded Web Server. For more advanced system support tasks, see the Networking Guide on the Software and Documentation CD or the Embedded Web Server Administrator's Guide at http://support.lexmark.com. Checking the status of the printer 1 Type the printer IP address into the address field of your Web browser.
Administrative support 264 2 Click Settings. 3 Under Other Settings, click E‑mail Alert Setup. 4 Select the items for notification, and type the e‑mail addresses. 5 Click Submit. Note: For information on setting up the e‑mail server, contact your system support person. Viewing reports You can view some reports from the Embedded Web Server. These reports are useful for assessing the status of the printer, the network, and supplies.
Clearing jams 265 Clearing jams Carefully select paper and specialty media and load it properly to avoid most jams. If jams do occur, follow the steps outlined in this section. Note: Jam recovery is set to Auto by default. The printer reprints jammed pages unless the memory required to hold the pages is needed for other printer tasks. Avoiding jams Paper tray recommendations • • • • • Make sure the paper lies flat in the tray. Do not remove a tray while the printer is printing.
Clearing jams 266 2 3 4 1 14 13 5 12 6 11 10 9 Area 1 Area name Cover F (paper transport) 2 Standard finisher bin 3 Door G 4 Door H 5 Finisher bin 1 6 Finisher bin 2 7 Door C 8 7 Jam numbers What to do 4yy.xx 455 Open cover F, and then remove jammed paper. Open door G and H, and then remove the jammed paper. Open staple door, remove the staple cartridge, and then remove the jammed staple.
Clearing jams Area 267 Area name Jam numbers What to do 12 Door B 230 13 Door A 201–202 231 Open door B, and then remove jammed paper. Open door A, and then remove the jammed paper. Remove all jammed paper in the fuser. 281 14 Door D 203 Open door A, and then door D, and then remove the jammed paper. 201–202 paper jams If the jammed paper is visible in the standard exit bin, then firmly grasp the paper on each side, and then gently pull it out.
Clearing jams 268 3 Firmly grasp the jammed paper on each side, and then gently pull it out. Warning—Potential Damage: Do not touch the center of the fuser unit. Doing so will damage the fuser. Note: Make sure all paper fragments are removed. 4 Push the green lever back into place. 5 Close door A. 6 If necessary, touch Continue from the printer control panel. Paper jam under the fuser 1 Open door A. CAUTION—HOT SURFACE: The inside of the printer might be hot.
Clearing jams 269 1 Open door A, and then door D by lifting the release latch of each door and lowering the doors. CAUTION—HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a hot component, allow the surface to cool before touching. 2 Firmly grasp the jammed paper on each side, and then gently pull it out. Note: Make sure all paper fragments are removed. 3 Close door D, and then close door A. 4 If necessary, touch Continue from the printer control panel.
Clearing jams 270 2 Firmly grasp the jammed paper on each side, and then gently pull it out. Note: Make sure all paper fragments are removed. 3 Close door B. 4 If necessary, touch Continue from the printer control panel. 231 paper jam 1 Open door A by lifting the release latch, and then lowering the door. CAUTION—HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a hot component, allow the surface to cool before touching it.
Clearing jams 2 Lift the green lever. 3 Firmly grasp the jammed paper on each side, and then gently pull it out. Note: Make sure all paper fragments are removed. 4 Push the green lever back into place. 5 Close door A. 6 If necessary, touch Continue from the printer control panel. 24x paper jam Note: Make sure all paper fragments are removed when pulling out any jammed paper.
Clearing jams Paper jam in Tray 1 1 Open Tray 1. 2 Firmly grasp the jammed paper on each side, and then gently pull it out. 3 Close Tray 1. 4 If necessary, touch Continue, jam cleared from the printer control panel.
Clearing jams Paper jam in one of the optional trays (Trays 2–4) 1 Check door C, and then firmly grasp the jammed paper and then pull it out. 2 Open the specified tray. 3 Firmly grasp the jammed paper on each side, and then gently pull it out. 4 Close the tray. 5 If necessary, touch Continue, jam cleared from the printer control panel.
Clearing jams Paper jam in Tray 5 (high‑capacity feeder) Paper jam inside the tray 1 Pull out the tray until it stops. Warning—Potential Damage: Do not pull out the tray with too much force. Doing so may hit and injure your knees. 2 Firmly grasp the jammed paper on each side, and then gently pull it out. 3 Push the tray gently until it stops. 4 If necessary, touch Continue, jam cleared from the printer control panel.
Clearing jams Paper jam in the tray exit 1 Gently move the tray to the left until it stops. 2 Firmly grasp the jammed paper on each side, and then gently pull it out. 3 Gently put the tray back into position. 4 If necessary, touch Continue, jam cleared from the printer control panel. Paper jam in the top cover 1 Gently move the tray to the left until it stops.
Clearing jams 276 2 Open the top cover. 1 2 2 3 Firmly grasp the jammed paper on each side, and then gently pull it out.
Clearing jams 4 Close the top cover. 5 Gently put the tray back into position. 6 If necessary, touch Continue, jam cleared from the printer control panel. 250 paper jam 1 Remove any jammed pages from the multipurpose feeder. 2 Load paper into the multipurpose feeder. 3 If necessary, touch Continue, jam cleared from the printer control panel.
Clearing jams 278 281 paper jam Paper jam in door A 1 Open door A. CAUTION—HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a hot component, allow the surface to cool before touching. 2 Determine where the jam is located, and then remove it: a If the paper is visible under the fuser, firmly grasp it on each side, and then gently pull it out. Note: Make sure all paper fragments are removed. b If the paper is not visible, then you will need to remove the fuser unit.
Clearing jams 279 4 Align the fuser unit using the handles on each side, and then place it back into the printer. 2 2 1 3 Close door A. 4 If necessary, touch Continue from the printer control panel. Paper jam in cover F (paper transport) 1 Open cover F. 2 Firmly grasp the jammed paper on each side, and then gently pull it out. Note: Make sure all paper fragments are removed. Note: If the paper jam on the right is difficult to remove, then rotate the knob counterclockwise. 3 Close cover F.
Clearing jams 280 4yy.xx paper jams If the jammed paper is visible in any of the finisher exit bins, then firmly grasp the paper on each side, and then gently pull it out. 1 Standard finisher bin 2 Finisher bin 1 3 Finisher bin 2 Note: Finisher bin 2 is available only when a booklet finisher is installed. Note: Make sure all paper fragments are removed. Paper jam in door H 1 Open door H. Note: Door H is located between the finisher exit bins.
Clearing jams 3 Close door H. 4 If necessary, touch Continue from the printer control panel. Paper jam in door G 1 Open door G.
Clearing jams 282 1 2 3 4 5 6 7 Area Cover, knob, or handle name 1 Cover G1 2 Cover G2 3 Knob G3 4 Cover G4 5 Cover G7 6 Knob G8 7 Handle G9 2 Lift cover G1 lever. 3 Firmly grasp any jammed paper, and then gently pull it out. Note: Make sure to remove all paper fragments after gently pulling out any jammed paper inside door G. 4 Move cover G2 to the right, and then remove any jammed paper. Note: If the paper is jammed in the rollers, then rotate knob G3 counterclockwise.
Clearing jams 283 7 Pull handle G9 until the tray is completely open. 8 Lift the inside cover. If the paper is jammed in the rollers, then rotate knob G8 counterclockwise, and then remove the jammed paper. 9 Close door G. 10 If necessary, touch Continue from the printer control panel.
Clearing jams Paper jam in cover F (paper transport) 1 Open cover F. 2 Firmly grasp the jammed paper on each side, and then gently pull it out. Note: Make sure all paper fragments are removed. Note: If the paper jam on the right is difficult to remove, then rotate the knob counterclockwise. 3 Close cover F. 4 If necessary, touch Continue from the printer control panel.
Clearing jams 455 staple jam 1 Open door G. 2 Press the latch to open the stapler door. Note: The stapler door is located behind the finisher. 3 Lower the latch of the staple cartridge holder, and then pull the staple cartridge holder out of the printer.
Clearing jams 286 4 Use the metal tab to lift the staple guard, and then remove any jammed or loose staples. 5 Close the staple guard. 6 Press down on the staple guard until it clicks into place. 7 Push the staple cartridge holder firmly back into the stapler unit until the staple cartridge holder clicks into place. 8 Close the stapler door.
Clearing jams 9 Close door G. 10 If necessary, touch Continue, jam cleared from the printer control panel. 28y.xx paper jams The scanner failed to feed one or more pages through the ADF. 1 Remove all original documents from the ADF. Note: The message clears when the pages are removed from the ADF. 2 Open the ADF cover. 3 Firmly grasp the jammed paper on each side, and then gently pull it out. Note: Make sure all paper fragments are removed. 4 Close the ADF cover.
Troubleshooting 288 Troubleshooting Understanding printer messages Adjusting color Wait for the process to complete. Bin 2 is unable to lower, remove paper and check for an obstruction Try one or more of the following: • Remove paper and clear any obstruction from the bin. • Touch Continue to clear the message and continue printing. Change [paper source] to [custom type name] Try one or more of the following: • Touch Use current [paper source] to ignore the message and print from the selected tray.
Troubleshooting 289 Change [paper source] to [custom string] load [orientation] Try one or more of the following: • Touch Use current [paper source] to ignore the message and print from the selected tray. • Load the correct paper size and type in the tray, verify the paper size and type settings are specified in the printer control panel Paper menu, and then touch Paper changed, continue. • Touch Cancel job to cancel the print job.
Troubleshooting 290 Check [src] orientation or guides Try one or more of the following: • Move the paper guides in the tray to the correct positions for the paper size loaded. • Make sure the paper size setting matches the paper loaded in the tray: 1 From the printer control panel Paper menu, check the Paper Size setting. 2 Before sending the print job, specify the correct size setting: – For Windows users, specify the paper size from Print Properties.
Troubleshooting 291 Fax partition inoperative. Contact system administrator. The fax partition appears to be corrupted. Try one or more of the following: • Touch Continue to clear the message. • Turn the printer off and then back on to reset the printer. If the message appears again, then contact your system support person. Fax server 'To Format' not set up. Contact system administrator. The printer is in Fax Server mode, but the Fax Server setup has not been completed.
Troubleshooting 292 4 Connect the power cord to a properly grounded electrical outlet. 5 Turn the printer back on. • Cancel the print job. Load [src] with [custom type name] Try one or more of the following: • Load the specified paper in the tray or feeder. • Touch Paper loaded, continue to clear the message and continue printing. If the printer finds a tray that has the correct paper type and size, it feeds from that tray.
Troubleshooting 293 Load Manual Feeder with [custom type name] Try one or more of the following: • • • • Load the specified paper in the manual feeder. Touch Prompt each page, paper loaded or Do not prompt, paper loaded to clear the message and continue printing. Touch Automatically select paper to use the paper loaded in the tray. Cancel the print job. Load Manual Feeder with [custom string] Try one or more of the following: • • • • Load the specified paper in the manual feeder.
Troubleshooting 294 Manual feeder expects [paper size]. Check [paper source] guides Try one or more of the following: • Load the specified paper size in the manual feeder. • Physically adjust [paper source] guides to a recognized paper size. • Touch Continue to clear the message and continue printing. If the printer finds a tray that has the correct paper type and size, then it feeds from that tray.
Troubleshooting 295 Scanner ADF Cover Open The ADF cover is open. The message clears when the cover is closed. Scan Document Too Long The scan job exceeds the maximum number of pages. Touch Cancel Job to clear the message. SMTP server not set up. Contact system administrator. An error occurred on the SMTP server, or the SMTP server is not configured properly. Touch Continue to clear the message. If the message appears again, contact your system support person.
Troubleshooting 296 • Check that the paper size is correctly set. For example, if the MP Feeder Size is set to Universal, make sure the paper is large enough for the data being printed. • Cancel the print job. 34 Incorrect paper type, check [paper source] Try one or more of the following: • Load the appropriate paper or specialty media in the proper tray. • Confirm that the wheel on Tray 1 is set to the paper type loaded in the tray.
Troubleshooting 37 Insufficient memory, some Held Jobs were deleted The printer deleted some held jobs in order to process current jobs. Touch Continue to clear the message. 37 Insufficient memory, some held jobs will not be restored The printer was unable to restore some or all of the confidential or held jobs on the printer hard disk. Touch Continue to clear the message. 38 Memory full Try one or more of the following: • Touch Cancel job to clear the message. • Install additional printer memory.
Troubleshooting 298 53 Unformatted flash detected Try one or more of the following: • Touch Continue to stop the defragment operation and continue printing. • Format the flash memory. If the error message remains, the flash memory may be defective and require replacing. 54 Network [x] software error Try one or more of the following: • Touch Continue to continue printing. • Turn the printer off, wait for about 10 seconds, and then turn the printer back on.
Troubleshooting 56 Parallel port [x] disabled Try one or more of the following: • Touch Continue to clear the message. The printer discards any data received through the parallel port. • Make sure the Parallel Buffer menu item is not set to Disabled. 56 Serial port [x] disabled Try one or more of the following: • Touch Continue to clear the message. The printer discards any data received through the serial port. • Make sure the Serial Buffer menu is not set to Disabled.
Troubleshooting 58 Too many flash options installed 1 Turn the printer off. 2 Unplug the power cord from the wall outlet. 3 Remove the excess flash memory. 4 Connect the power cord to a properly grounded outlet. 5 Turn the printer back on. 58 Too many trays attached 1 Turn the printer off. 2 Unplug the power cord from the wall outlet. 3 Remove the additional trays. 4 Connect the power cord to a properly grounded outlet. 5 Turn the printer back on.
Troubleshooting 301 80.xx Fuser life warning • Order a replacement fuser immediately. When print quality is reduced, install the new fuser, following the instruction sheet that came with the replacement part. • Touch Continue to clear the message and continue printing. 80 Replace fuser 1 Replace the fuser using the instruction sheet that came with the replacement part. 2 Touch Continue to clear the message and continue printing.
Troubleshooting 302 82.xx Waste toner bottle nearly full Order a replacement waste toner bottle immediately. 1 Replace the waste toner bottle. For instructions on installing the waste toner bottle, from the printer control panel touch More Information. 2 Touch Continue to clear the message and continue printing. 84 unsupported [color] photoconductor Remove the specified photoconductor, and then install a supported one. 84.
Troubleshooting 303 88.xx [color] cartridge low 1 Order a replacement toner cartridge immediately. 2 Remove the specified cartridge. 3 Firmly shake the cartridge side‑to‑side and front‑to‑back several times to redistribute the toner. 4 Reinsert the cartridge, and then touch Continue to clear the message and continue printing. Note: Repeat this procedure multiple times until the print remains faded, and then replace the cartridge. 88.xx [Color] cartridge very low The specified print cartridge is very low.
Troubleshooting 304 840.01 Scanner disabled by admin Print without the scanner or contact your system support person. 840.02 Scanner disabled. Contact system administrator if problem persists. Try one or more of the following: • Touch Continue with scanner disabled to return to the home screen, and then contact your system support person. • Touch Reboot and automatically enable scanner to cancel the job. Note: This attempts to bring the scanner back online.
Troubleshooting 305 If Ready does not appear, then turn the printer off and contact Customer Support. Error message about reading USB drive appears Make sure the flash drive is supported. Print jobs do not print Try one or more of the following: MAKE SURE THERE IS NO PROBLEM WITH YOUR PRINTER From the printer control panel, check the status. If necessary, follow the recovery instructions. MAKE SURE THE PRINTER IS READY TO PRINT Make sure Ready appears on the display before sending a print job.
Troubleshooting 306 MAKE SURE PRINTER CABLES ARE SECURELY CONNECTED Check the cable connections to the printer and print server to make sure they are secure. For more information, see the setup documentation that came with the printer. Confidential and other held jobs do not print These are possible solutions. Try one or more of the following: PARTIAL JOB, NO JOB, OR BLANK PAGE PRINTS The print job may contain a formatting error or invalid data. • Delete the print job, and then print it again.
Troubleshooting 307 Job prints from the wrong tray or on the wrong paper CHECK THE PAPER TYPE AND PAPER SIZE SETTINGS Make sure the paper type setting matches the paper loaded in the tray: 1 From the printer control panel Paper menu, check the paper type and paper size settings. 2 Before sending the job to print, specify the correct type setting: • For Windows users, specify the paper type from Print Properties. • For Macintosh users, specify the paper type from the Print dialog.
Troubleshooting MAKE SURE THE PRINTER HAS ENOUGH MEMORY Add printer memory or an optional hard disk. Unexpected page breaks occur INCREASE THE PRINT TIMEOUT VALUE 1 From the home screen, navigate to: > Settings > General Settings > Timeouts 2 Touch the left or right arrow next to Print Timeout until the desired value appears. 3 Touch Submit. Solving copy problems Copier does not respond These are possible solutions.
Troubleshooting • • • • • • 309 Dark print Skewed lines Smudges Streaks Unexpected characters White lines in print Try one or more of the following: CLEAR ANY ERROR MESSAGES Check the display and clear any error messages. REPLACE THE TONER OR PRINT CARTRIDGE When the print remains faded, replace the toner or print cartridge. CLEAN THE SCANNER GLASS The scanner glass may be dirty. Clean the scanner glass with a clean, lint‑free cloth dampened with water.
Troubleshooting 310 When the text is light or disappearing: • From the Copy screen, navigate to: Content > Text > > select the appropriate source for the original document being copied > • From the Copy screen, navigate to: Advanced Options > Advanced Imaging > Sharpness > increase the current setting • From the Copy screen, navigate to: Advanced Options > Advanced Imaging > Background removal, and then reduce the current setting • From the Copy screen, navigate to: Advanced Options > Advanced Imagin
Troubleshooting 311 Solving scanner problems Checking an unresponsive scanner If your scanner is not responding, then make sure: • The printer is turned on. • The printer cable is securely attached to the printer and the host computer, print server, option, or other network device. • • • • The power cord is plugged into the printer and a properly grounded electrical outlet. The electrical outlet is not turned off by any switch or breaker.
Troubleshooting 312 THE SCANNER GLASS MAY BE DIRTY Clean the scanner glass with a clean, lint‑free cloth dampened with water. For more information, see “Cleaning the scanner glass” on page 232. ADJUST THE SCAN RESOLUTION Increase the resolution of the scan for a higher quality output. CHECK THE QUALITY OF THE ORIGINAL DOCUMENT Make sure the quality of the original document is satisfactory.
Troubleshooting 313 Solving fax problems Fax and e-mail functions are not set up The indicator light blinks red until you set up fax and e‑mail. To set up fax and e‑mail, follow these steps: Note: Before completing these instructions for a printer on a network, make sure the fax cables are connected. 1 From the home screen, navigate to: > General Settings > Run initial setup > Yes > Submit 2 Turn the printer off, and then turn it back on. 3 From the printer control panel, touch your language.
Troubleshooting 314 CHECK THE TELEPHONE WALL JACK 1 Plug a telephone into the wall jack. 2 Listen for a dial tone. 3 If you do not hear a dial tone, then plug a different telephone into the wall jack. 4 If you still do not hear a dial tone, then plug a telephone into a different wall jack. 5 If you hear a dial tone, then connect the printer to that wall jack. REVIEW THIS DIGITAL PHONE SERVICE CHECKLIST The fax modem is an analog device.
Troubleshooting 315 THE PRINTER MEMORY MAY BE FULL 1 Dial the fax number. 2 Scan the original document one page at a time. Can send but not receive faxes Try one or more of the following: LOAD PAPER If the tray is empty, then load paper in the tray or feeder. CHECK THE RING COUNT DELAY SETTINGS The ring count delay sets the number of times the phone rings before the printer answers.
Troubleshooting MAKE SURE THE SHORTCUT NUMBER IS SET UP PROPERLY • Check to make sure the shortcut number has been programmed for the number that you want to dial. • As an alternative, dial the telephone number manually. Received fax has poor print quality Try one or more of the following: RESEND THE DOCUMENT Ask the person who sent you the fax to: • Check that the quality of the original document is satisfactory. • Resend the fax.
Troubleshooting 317 If you do not know the IP address or host name of the printer, then you can: • View the information on the printer control panel home screen, or in the TCP/IP section under the Networks/Ports menu. • Print a network setup page or menu settings page and locate the information in the TCP/IP section. 2 Click Settings or Configuration. 3 Click Device Solutions > Solutions (eSF) > System tab > Log. 4 From the Filter menu, select an application status.
Troubleshooting 318 MAKE SURE THE OPTION IS SELECTED From the computer you are printing from, select the option. For more information, see “Updating available options in the printer driver” on page 46. Paper tray problems Try one or more of the following: MAKE SURE THE PAPER IS LOADED CORRECTLY 1 Open the paper tray. 2 Check for paper jams or misfeeds. 3 Make sure the paper guides are aligned against the edges of the paper. 4 Make sure the paper tray closes properly.
Troubleshooting • Make sure the paper or specialty media meets specifications and is not damaged. • Make sure the guides are positioned correctly for the paper size loaded. Memory card Make sure the memory card is securely connected to the printer system board. Cannot detect flash memory card Make sure the flash memory card is securely connected to the printer system board. Cannot detect printer hard disk Make sure the printer hard disk is securely connected to the printer system board.
Troubleshooting 320 3 Under Publications on this CD, select Networking Guide. USB/parallel interface card does not operate correctly CHECK THE USB/PARALLEL INTERFACE CARD CONNECTION Make sure the USB/parallel interface card is securely connected to the printer system board. CHECK THE CABLE Make sure you are using the correct cable and that it is securely connected. Solving paper feed problems Paper frequently jams These are possible solutions.
Troubleshooting 321 Jammed pages are not reprinted TURN ON JAM RECOVERY 1 From the home screen, navigate to: > Settings > General Settings > Print Recovery 2 Touch the arrows next to Jam Recovery until On or Auto appears. 3 Touch Submit. Solving print quality problems If these suggestions do not correct the problem, then contact customer support. You may have a printer part that requires adjustment or replacement.
Troubleshooting 322 Fine horizontal lines appear on color pages You may notice fine, horizontal lines in photographs or pages with a high concentration of color. This can occur when the printer is in Quiet Mode. To fix this, set Quiet Mode to Off (Image/Photo).
Troubleshooting Gray background ABCDE ABCDE ABCDE CHECK THE TONER DARKNESS SETTING Select a lighter Toner Darkness setting: • From the printer control panel Quality menu, change the setting. • For Windows users, change the setting from Print Properties. • For Macintosh users, change the setting from the Print dialog. THE TONER CARTRIDGE MAY BE WORN OR DEFECTIVE Replace the toner cartridge. Incorrect margins ABCD ABCD ABCD These are possible solutions.
Troubleshooting 324 Light colored line, white line, or incorrectly colored line appears on prints ABCDE ABCDE ABCDE ABCDE ABCDE Try one or more of the following: MAKE SURE THERE IS NO DEFECTIVE TONER CARTRIDGE Replace the defective toner cartridge. MAKE SURE THE PHOTOCONDUCTOR UNIT IS NOT DEFECTIVE Replace the defective photoconductor unit. MAKE SURE THE TRANSFER MODULE IS NOT DEFECTIVE Replace the defective transfer module.
Troubleshooting 325 Print irregularities Try one or more of the following: LOAD PAPER FROM A FRESH PACKAGE The paper may have absorbed moisture due to high humidity. Store paper in its original wrapper until you use it. CHECK THE PAPER TYPE AND WEIGHT SETTINGS Make sure the paper type and weight settings match the paper loaded in the tray or feeder: 1 From the printer control panel Paper menu, check the Paper Type and Paper Weight settings.
Troubleshooting 326 Print is too dark Try one or more of the following: CHECK THE DARKNESS, BRIGHTNESS, AND CONTRAST SETTINGS The Toner Darkness setting may be too dark, the Brightness setting may be too dark, or the Contrast setting may be too high. • Change these settings from the printer control panel Quality menu. • For Windows users, change these settings from Print Properties. • For Macintosh users: 1 Choose File > Print. 2 From the “Orientation pictures” menu, choose Printer Features.
Troubleshooting 327 Try one or more of the following: CHECK THE DARKNESS, BRIGHTNESS, AND CONTRAST SETTINGS The Toner Darkness setting may be too light, the Brightness setting may be too light, or the Contrast setting may be too low. • Change these settings from the printer control panel Quality menu. • For Windows users, change these settings from Print Properties • For Macintosh users: 1 Choose File > Print. 2 From the Orientation pictures drop‑down menu, choose Printer Features.
Troubleshooting 328 MAKE SURE THE TONER OR PRINT CARTRIDGE IS NOT LOW ON TONER When 88.xx [color] cartridge low appears, make sure that toner is distributed evenly among all four cartridges: 1 Remove the cartridge. Warning—Potential Damage: Be careful not to touch the photoconductor drum. Doing so may affect the print quality of future print jobs. 2 Firmly shake the cartridge side-to-side and front-to-back several times to redistribute the toner. 3 Reinsert the cartridge.
Troubleshooting 329 MAKE SURE THE PRINTER IS CLEAN OR IS NOT CONTAMINATED WITH PAPER DUST Clean the exterior of the printer 1 Make sure that the printer is turned off and unplugged from the wall outlet. Warning—Potential Damage: To avoid the risk of electric shock when cleaning the exterior of the printer, unplug the power cord from the wall outlet and disconnect all cables to the printer before proceeding. 2 Remove paper from the standard exit bin. 3 Dampen a clean, lint-free cloth with water.
Troubleshooting 330 Black or white streaks appear on transparencies or paper Try one or more of the following: ENSURE THAT THE FILL PATTERN IS CORRECT If the fill pattern is incorrect, choose a different fill pattern from your software program. CHECK THE PAPER TYPE • Use only the recommended transparencies. • Ensure that the Paper Type setting matches what is loaded in the tray or feeder.
Troubleshooting 331 SELECT ANOTHER TRAY OR FEEDER • From the printer control panel Paper Menu, select Default Source. • For Windows users, select the paper source from Print Properties. • For Macintosh users, select the paper source from the Print dialog and pop‑up menus. MAKE SURE THERE IS NO WORN, DEFECTIVE, OR EMPTY TONER CARTRIDGE Replace the worn, defective, or empty toner cartridge. CLEAR THE PAPER PATH AROUND THE TONER CARTRIDGE CAUTION—HOT SURFACE: The inside of the printer might be hot.
Troubleshooting Toner fog or background shading appears on the page Try one or more of the following: MAKE SURE THE TONER CARTRIDGE IS INSTALLED CORRECTLY OR IS NOT DEFECTIVE Reinstall or replace the defective toner cartridge. MAKE SURE THE TRANSFER MODULE IS NOT WORN OR DEFECTIVE Replace the worn or defective transfer module. MAKE SURE THE PHOTOCONDUCTOR UNIT IS NOT WORN OR DEFECTIVE Replace the word or defective photoconductor unit.
Troubleshooting 333 CHECK THE PAPER TYPE AND WEIGHT SETTINGS Make sure the paper type and weight settings match the paper loaded in the tray or feeder: 1 From the printer control panel Paper menu, check the Paper Type and Paper Weight settings. Change the Paper Weight setting from Normal to Heavy. 2 Before sending the print job, specify the correct paper type setting: • For Windows users, specify the paper type from Print Properties. • For Macintosh users, specify the paper type from the Print dialog.
Troubleshooting 334 CHECK THE PAPER TYPE SETTING Make sure the paper type setting is set to Transparency: 1 From the printer control panel Paper menu, check the Paper Type setting. 2 Before sending the job to print, specify the correct type setting: • For Windows users, specify the type from Print Properties. • For Macintosh users, specify the type from the Print dialog.
Troubleshooting 335 The printed page appears tinted. Can I adjust the color? Sometimes a printed page may appear tinted (for example, everything printed seems to be too red). This can be caused by environmental conditions, paper type, lighting conditions, or user preference. In these instances, adjust the Color Balance setting to create a more preferable color. Color Balance provides the user with the ability to make subtle adjustments to the amount of toner being used in each color plane.
Troubleshooting Object type CMYK Image CMYK Text CMYK Graphics 336 Color conversion tables • US CMYK—Applies color correction to approximate the SWOP (Specifications for Web Offset Publishing) color output. • Euro CMYK—Applies color correction to approximated EuroScale color output. • Vivid CMYK—Increases the color saturation of the US CMYK color correction setting. • Off—No color correction is implemented.
Troubleshooting 337 5 Enter an increment value from 1–255. Note: The closer the value is to 1, the narrower the color sample range will appear. 6 Click Print. Embedded Web Server does not open Try one or more of the following: CHECK THE NETWORK CONNECTION Make sure the printer and computer are turned on and connected to the same network.
Notices 338 Notices Product information Product name: Lexmark X950de, X952dte, X954dhe, XS955de, XS955dhe Machine type: 7558 Model(s): 032, 036, 232, 236, 432, 436, 496 Edition notice May 2013 The following paragraph does not apply to any country where such provisions are inconsistent with local law: LEXMARK INTERNATIONAL, INC.
Notices 339 UNITED STATES GOVERNMENT RIGHTS This software and any accompanying documentation provided under this agreement are commercial computer software and documentation developed exclusively at private expense. Trademarks Lexmark, Lexmark with diamond design, and MarkVision are trademarks of Lexmark International, Inc., registered in the United States and/or other countries. ScanBack is a trademark of Lexmark International, Inc. Mac and the Mac logo are trademarks of Apple Inc., registered in the U.
Notices 340 Palatino Linotype-Hell AG and/or its subsidiaries Stempel Garamond Linotype-Hell AG and/or its subsidiaries Taffy Agfa Corporation Times New Roman The Monotype Corporation plc Univers Linotype-Hell AG and/or its subsidiaries All other trademarks are the property of their respective owners. AirPrint and the AirPrint logo are trademarks of Apple, Inc.
Notices 341 Note: Some modes may not apply to your product. 1-meter average sound pressure, dBA Printing 53 dBA Ready 35 dBA Values are subject to change. See www.lexmark.com for current values. Waste from Electrical and Electronic Equipment (WEEE) directive The WEEE logo signifies specific recycling programs and procedures for electronic products in countries of the European Union. We encourage the recycling of our products.
Notices 342 Temperature information Ambient temperature 15.6 to 32.2°C (60 to 90°F) Shipping and storage temperature ‑40° to 40° C (‑40 to 104° F) and ‑0° to 35° C (32 to 95° F) Power consumption Product power consumption The following table documents the power consumption characteristics of the product. Note: Some modes may not apply to your product. Mode Description Power consumption (Watts) Printing The product is generating hard‑copy output from electronic inputs.
Notices 343 Off mode If this product has an off mode which still consumes a small amount of power, then to completely stop product power consumption, disconnect the power supply cord from the wall outlet. Total energy usage It is sometimes helpful to calculate the total product energy usage. Since power consumption claims are provided in power units of Watts, the power consumption should be multiplied by the time the product spends in each mode in order to calculate energy usage.
Notices 344 This equipment uses the RJ-11C Universal Service Order Code (USOC) jack. A plug and jack used to connect this equipment to the premises’ wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. See your setup documentation for more information.
Notices 345 Notice to users of the Canadian telephone network This product meets the applicable Industry Canada technical specifications. The Ringer Equivalence Number (REN) is an indication of the maximum number of terminals allowed to be connected to a telephone interface. The terminus of an interface may consist of any combination of devices, subject only to the requirement that the sum of the RENs of all the devices does not exceed five.
Notices 346 Some parameters required for compliance with Telecom's telepermit requirements are dependent on the equipment associated with this device.
Notices 347 Compliance is indicated by the CE marking. The manufacturer of this product is: Lexmark International, Inc., 740 West New Circle Road, Lexington, KY, 40550 USA. The authorized representative is: Lexmark International Technology Hungária Kft., 8 Lechner Ödön fasor, Millennium Tower III, 1095 Budapest HUNGARY, A declaration of conformity to the requirements of the Directives is available upon request from the Authorized Representative.
Notices 348 Cet appareil a été conçu pour fonctionner uniquement avec l'antenne fournie. L'utilisation de toute autre antenne est strictement interdite par la réglementation d'Industry Canada. En application des réglementations d'Industry Canada, l'utilisation d'une antenne de gain supérieur est strictement interdite. Pour empêcher toute interférence radio au service faisant l'objet d'une licence, cet appareil doit être utilisé à l'intérieur et loin des fenêtres afin de garantir une protection optimale.
Notices 349 AT BE BG CH CY CZ DE DK EE EL ES FI FR HR HU IE IS IT LI LT LU LV MT NL NO PL PT RO SE SI SK TR UK Česky Společnost Lexmark International, Inc. tímto prohlašuje, že výrobek tento výrobek je ve shodě se základními požadavky a dalšími příslušnými ustanoveními směrnice 1999/5/ES. Dansk Lexmark International, Inc. erklærer herved, at dette produkt overholder de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF.
Notices 350 Polski Niniejszym Lexmark International, Inc. oświadcza, że niniejszy produkt jest zgodny z zasadniczymi wymogami oraz pozostałymi stosownymi postanowieniami Dyrektywy 1999/5/EC. Português A Lexmark International Inc. declara que este este produto está conforme com os requisitos essenciais e outras disposições da Diretiva 1999/5/CE. Slovensky Lexmark International, Inc. týmto vyhlasuje, že tento produkt spĺňa základné požiadavky a všetky príslušné ustanovenia smernice 1999/5/ES.
Notices 351 When warranty service involves the exchange of a product or part, the item replaced becomes the property of the Remarketer or Lexmark. The replacement may be a new or repaired item. The replacement item assumes the remaining warranty period of the original product.
Notices 352 This is true even if you advise Lexmark or a Remarketer of the possibility of such damages. Lexmark is not liable for any claim by you based on a third party claim. This limitation of remedies also applies to claims against any Suppliers and Remarketers of Lexmark. Lexmark's and its Suppliers' and Remarketers' limitations of remedies are not cumulative. Such Suppliers and Remarketers are intended beneficiaries of this limitation.
Index 353 Index Numerics 1565 Emulation error, load emulation option 304 1‑tray module installing 41 2,000‑sheet high‑capacity feeder installing 41 2000‑sheet high‑capacity feeder loading 70 203 paper jam 268 230 paper jam 269 24x paper jam 271 250 paper jam 277 280.06 Paper missing 303 28y.xx paper jams 287 2yy.xx Close flatbed cover and load originals if restarting job 303 31.xx Missing or Defective [color] cartridge 295 32.
Index C cables Ethernet 43 USB 43 calling customer support 337 canceling print job, from computer 96 canceling a print job from a computer 96 from the printer control panel 96 canceling an e-mail 112 cannot open Embedded Web Server 337 card stock tips 94 Change [paper source] to [custom string] 288 Change [paper source] to [custom string] load [orientation] 289 Change [paper source] to [custom type name] 288 Change [paper source] to [custom type name] load [orientation] 288 Change [paper source] to [paper
Index directory list printing 96 disk wiping 229 Disk Wiping menu 169 display troubleshooting display is blank 304 display shows only diamonds 304 display, printer control panel 15 adjusting brightness 62 disposing of printer hard disk 228 distinctive ring service, fax connecting to 119 documents, printing from Macintosh 88 from Windows 88 duplexing 100 E Eco‑Mode setting 60 Edit Security Setups menu 167 Embedded Web Server accessing 21 administrator settings 263 checking printer status 263 checking the s
Index creating shortcuts using the Embedded Web Server 121 creating shortcuts using the touch screen 121 distinctive ring service 119 fax setup 116 forwarding faxes 128 holding faxes 128 making a fax lighter or darker 124 sending a fax at a scheduled time 124 sending using the touch screen 122 setting the date and time 120 setting the fax number or station number 120 setting the outgoing fax name or station name 120 viewing a fax log 125 FCC notices 340, 343, 347 features Scan Center 135 finding more infor
Index light colored line, white line, or incorrectly colored line appears on prints 324 light, indicator 15 linking trays 75 Load Manual Feeder with [custom string] 293 Load Manual Feeder with [custom type name] 293 Load Manual Feeder with [paper size] 293 Load Manual Feeder with [paper type] [paper size] 293 Load staples 293 loading 2000‑sheet high‑capacity feeder 70 520‑sheet tray (standard or optional) 64 letterhead in 2000‑sheet high‑capacity feeder 70 optional 1,150‑sheet tray 67 optional 850‑sheet tr
Index scan 136 scan to computer 136, 137 ordering maintenance kit 240 staple cartridges 240 toner cartridges 239 waste toner bottle 240 ordering photoconductor units 240 output file type changing 111 P paper characteristics 77 different sizes, copying 100 finishing features 85 letterhead 79 preprinted forms 79 recycled 79 saving 103 selecting 78 storing 80 unacceptable 78, 79 Universal size setting 64 using recycled 59 paper feed troubleshooting message remains after jam is cleared 320 paper jams avoiding
Index printer hard disk encryption 230 printer hard disk memory erasing 229 printer information where to find 9 printer messages 1565 Emulation error, load emulation option 304 280.06 Paper missing 303 2yy.xx Close flatbed cover and load originals if restarting job 303 31.xx Missing or Defective [color] cartridge 295 32.
Index Load staples 293 Manual feeder expects [paper size]. Check [paper source] guides 294 Memory full, cannot print faxes 294 Power off, wait 2 seconds, power on 294 Remove paper from [linked set bin name] 294 Remove paper from all bins 294 Remove paper from bin [x] 294 Remove paper from standard output bin 294 Restore held jobs? 294 Scan Document Too Long 295 Scanner ADF Cover Open 295 SMTP server not set up. Contact system administrator.
Index scanner glass (flatbed) copying using 98 scanning from a flash drive 135 quick copy 97 to a computer 134 to an FTP address 131 to an FTP, using address book 131 scanning to a computer 134 scanning to a flash drive 135 scanning to an FTP address creating shortcuts using the computer 130 using shortcut numbers 131 using the address book 131 using the touch screen 131 Security Audit Log menu 171 selecting a location for the printer 10 sending a fax 122 sending a fax using shortcuts 123 sending a fax usi
Index using 92 tray linking assigning a custom paper type name 76 tray unlinking assigning a custom paper type name 76 trays linking 75 unlinking 75 troubleshooting an application error has occurred 316 cannot open Embedded Web Server 337 checking an unresponsive printer 304 checking an unresponsive scanner 311 contacting customer support 337 FAQ about color printing 334 fax and e‑mail functions are not set up 313 Scan to Network 316 solving basic printer problems 304 troubleshooting, copy copier does not
Index viewing reports 264 viewing a fax log 125 virtual display checking, using Embedded Web Server 263 volatile memory 228 erasing 228 volatility statement of 228 W waste toner bottle ordering 240 replacing 249 wiping the printer hard disk 229 Wireless menu 159 wireless network configuration information 47 installation, using Macintosh 49 installation, using Windows 48 wireless network setup in Windows 48 wireless printer setup in Macintosh 49 WS‑Scan about 23 X XPS menu 221 363
