Color Jetprinter User's Guide Z12

Printing
•
•
•
•
•
Printing
3
Loading banner paper
Use banner paper recommended for inkjets only. We do not
recommend using continuous form paper for dot matrix
printers.
Although the paper support holds up to 20 sheets of banner
paper, load only the number of sheets needed to make your
banner. For example, if your banner is 12 sheets long, load
only 12 sheets.
1
Remove any paper from the sheet feeder.
2
Load the banner paper:
3
Slide the paper guide to the edge of the banner paper.
4
Continue with “Step 3: Customize the printer settings” on
page 4.
5
After your banner prints, remove the banner paper and
return the paper support to the upright position.
Insert the leading edge of the first
page into the sheet feeder.
Pull the paper support up
slightly to unlock the front tabs.
a
cd
Tilt the paper support back until it
locks in the horizontal position.
b
Place your stack of banner paper on
the paper support.