Instructions / Assembly

DOUBLE HOOK
1. Position the bracket where
you want to install and mark
where the hole locations will be.
2. Drill 6mm holes where the
holes were marked.
3. Insert anchors into the drilled
holes using a hammer.
4. Install the bracket onto the wall
using screws.
5. Hang the hook onto the
bracket and tighten the screws.
CARE AND MAINTENANCE
 In order to keep the product surface like new please clean the product regularly.
 Wash the product with warm water and a soft cotton cloth.
 Avoid using any harsh cleaning chemicals, brushes or any cloth with a coarse surface to prevent
any scratches or corrosion to the product.
INSTALLATION INSTRUCTIONS