Installation Instructions

Before using your Lezyne GPS device for the first time, fully charge battery

and it is also recommended to visit lezyne.com/gpsroot and update your GPS

device to the latest software.

1. Remove exterior moisture.

2. Open USB cover.

3. Connect micro USB cable and device to powered USB port.

For best results, use the supplied Lezyne cable.

If device does not display charging symbol when plugged in, selected USB

port may not be powered – try another USB port.

Open USB cover for charging

Mounting tabs

Getting Started

Charging

To attach the X-Lock mount:

1. Align the shim with the bottom of the mount.

2. Attach the X-Lock mount securely using the two bands

that best fit your mounting location.

To connect the device to the X-Lock mount:

1. Align the tabs on the back of the device with the mount.

2. Press down and turn the device until it locks into place.

Mounting