23” In-cell Strip Touch Screen with Android Operating System Model: 23DST1 In order to better use this product Please keep this manual Properly DIRECTORY PAGE SAFETY INSTRUCTIONS.......................................................................................................1 WHAT’S IN THE BOX...................................................................................................... 2 Package Contents........................................................................................
Please carefully read through and keep the following instructions for future reference before using the display. Before using the LCD display, please read this manual completely and follow the guidelines to protect your own and other people’s property and avoid causing serious injury. DO NOT use this apparatus near water or install in a high-humidity environment. DO NOT place this apparatus in direct sunlight or install near any heat sources (such as radiators, heat registers, or stoves).
(Master Pack of 6) Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your display. The illustrations in this manual may differ from the actual product and items.
Before unpacking the display,Please check the packaging first, prepare a flat and stable surface near a wall outlet. Set the product box in an upright position according to the arrow markings on the outside of the product box. 1. Open the product box from the top side. 2. 6 accessory packages on top of package. 3. Remove six sets of accessories from the side compartments in the top layer.
4. Remove two displays, one by one, from the center compartment of the top layer. 5. Remove the cardboard base of the top layer. 6. Repeat steps 3 to 5 for the second layer. 7. Repeat steps 3 to 4 for the third layer. 8. Remove the electrostatic bags covering eachdisplay.
When carrying the display, always hold the display securely using both hands. When gripping the display do not put force on the screen. Avoid applying force or using sharp objects on the screen at all times. When placing the display, always put the screen face down as illustrated in the Setting Down the Display section. Never stand the display upright. Never tilt the display towards the left, right or balanced on a single corner of the frame.
To avoid injuries, follow the installation instructions to safely install the display onto a wall. It is recommended to allow a certified installation company conduct the wall mounting operation. CAUTION: Dropping the display may cause injuries to people around it. NOTE: A wall mount may be purchased separately for easier installation.
The display features an antenna on its top side used for Wi-Fi connections.When installing the display, please ensure that no objects are placed on the wireless antenna and that the area around the antenna is kept clear of any metal objects, devices, or equipment. Failure to do so will result in weak or possibly no wireless signal. The back of the display is equipped with three screw-holes that allow for mounting.
SETTING UP THE DISPLAY The following image and table show the location of the connectors and other components. Item DC PWR IN Micro USB*1 (OTG) Micro USB*1 Micro HDMI RESET Micro SD Description Connects with the supplied adapter and power cord. Connects with storage devices containing video and image files, a mouse, or a keyboard. Connects with storage devices containing video and image files, a mouse, or a keyboard.
1. Connect the adapter to the display. 2. Fully insert the plug the power cord into the power outlet socket. Once the power connection is connection is made, the display will automatically power on. CAUTION: Loose connections may cause noise. Do not plug and unplug the power cord repeatedly in a short period of time. NOTE: The supplied power cord varies depending on the country where you purchased this apparatus.
NOTE: Before making connections, make sure that the power for all the connected equipment is off and then powering on each device including the display after the connections are made. 1. Connect a USB-to-Micro-USB adapter or hub to the M-USB input port on display: 2. Connect any of the following items to the USB-to-Micro-USB adapter or hub: USB flash drive,keyboard,or mouse.Once connected the display will automatically display the video/image files located on the flashdrive.
FCC WARNING This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
