LL055RS1-62P1-OY1 Technical data sheet Supplier : LG Display, Ltd. Issued date : Jan. 12, 2016 Product : OLED panel Development Team Approval 2016.01.
Issue & revision history Version Date Description 0 2016/01/12 Issued (Tentative)
Rigid Square Type OLED Panel (LL055RS1-62P1-OY1) 1. Ordering Information Model Description Efficacy CCT LL055RS1-62P1-OY1 Panel with flexible PCB 60lm/W 2700K Remark 2. General Conditions Parameter Temperature Humidity Storage condition 0℃~40℃ < 70% RH Transport condition -20℃~60℃ < 85% RH Operating condition 0℃~40℃ < 70% RH Not over 170hrs 3. Maximum Ratings Parameter Sym Unit Max. Condition DC Forward Voltage VF V 10.
5. Mechanical Dimensions Outer Parameter Sym Unit Bare panel Length L mm 99.0±0.3 Width W mm 99.0±0.3 Thickness* T mm 0.88±0.1 Shape Square Weight g <20 Encapsulation area mm2 99.0x97.5 Luminance area mm2 90.0x90.
6. Drawings Wire length : 100mm Connector length : 9.2mm Wire length : 100mm Connector length : 10.
7. Appearance Criteria Items Dark spot Particle Pinhole Criteria Defects are judged by the size of each item in the active area and based on the criteria below Size(mm) Acceptable number D ≤ 0.5 Not counted 0.5 ＜ D ≤ 0.8 Not over 5 0.8＜ D Not allowed Note : D =(a+b)/2 Dent on surface a Bubble b Defects are judged by the size of each item in the active area and based on the criteria below Scratch or line on emitting surface Size(mm) Acceptable number Width ≤0.3 Not counted 0.
8. Reliability - Evaluation criteria : Luminance change within +/- 10% of initial value Items Condition High temperature/humidity operation 60℃, 90% RH / IF=Typ.mA,96Hrs Thermal shock -45℃,15min ↔ 85℃,15min 1cycle ,200cycles High temperature /humidity storage +85℃, 85% / 500Hrs Life time Room Temp. / IF=Typ.
9. Guideline to OLED Handling A. Handling and Safety 1. Unpack packing box with care. Remove packing trays gently and carefully from packing box. 2. During unloading and handling, gloves are required to prevent finger cuts or possible shocks. Gloves are also required to avoid fingerprints being left on the glass, and to keep moisture from causing corrosion to the metal traces. 3. Handle panels with caution.
Appendix A. Soldering guide 1. Please, follow the recommendation as below.
