DS1604 INSTRUCTION MANUAL ’16.
Introduction Thank you for purchasing "DS1604". Before or while using, read this manual thoroughly to ensure you use correctly. References to the Operation Download the latest information of this manual from DOCOMO website. Also you can check the latest information from this terminal. ■ Quick Start Guide (Accessories, in Japanese only) Basic function operations are explained.
How to Use this Manual • Any reprint of this manual is prohibited. • This manual is subject to change without prior notice. • Please note that "this terminal" indicates "DS1604" in this manual. Explanation of operations The following table describes how to select the icons and items displayed on the touch screen. Description Operation description From the Home screen, "Apps" Tap displayed on the Home screen. • The icons on the Home screen are explained below.
Supplied Accessories DS1604 This terminal (with warranty) TV Antenna Cable L01 Back Cover L40 Mickey Window Cover L01 クイックスタートガイド (Quick start guide) (In Japanese only) Battery Pack L24 ド ガイ ート スタ ック クイ 2 Contents/Precautions For optional accessories compatible with the terminal (optional), refer to NTT DOCOMO website. https://www.nttdocomo.co.
Before Using this Terminal • This terminal supports LTE, W-CDMA, GSM/ GPRS and wireless LAN systems. • Since this terminal uses wireless signal, it may not be able to use in a location with no signal reception such as a tunnel, underground, a building, an outdoor location with weak or poor signal reception, or a location outside of the Xi and FOMA service areas. Also this terminal may not be able to use on high upper floors of high-rise apartments or buildings, even if you can see no obstructions around you.
• The same as a PC, when you install an application, this terminal's performance may become unstable, or your location information and personal information registered on this terminal might be sent to outside via Internet and therefore cause fraudulent use. To avoid this, make sure to confirm the source and the operating conditions of the application before installation. • This terminal uses only docomo nano UIM card. Bring your docomo mini UIM card, UIM card or FOMA card to a docomo Shop to exchange it.
• Please read the terms of service of Google Inc. regarding Google services. Also, read each terms of services for other web services. • In case of loss of the terminal, set the screen to ensure the security of the terminal. For details, refer to "Lock Screen" (P202). • If you lose your terminal, change password of online service accounts from PC so that Google Services such as Gmail, Google Play, and service such as SNS, etc. should not be used by others.
■ The following symbols indicate special warnings regarding product usage. Denotes things not to do (prohibition). Denotes not to disassemble. Denotes not to use where it could get wet. Denotes not to use with wet hands. ■ "Safety Precautions" are explained in the following seven sections.
Handling the Terminal, Battery Pack, Adapter, TV Antenna Cable, Mickey Window Cover and docomo nano UIM card (Common) DANGER Do not use, store or leave it in places with a high temperature such as besides fire, besides a heater, inside a kotatsu, under direct sunlight or in cars under the blazing sun. Fire, burns, or injury may result. Do not put in heating appliances such as microwaves or high pressure containers. Fire, burns, injury, or electric shock may result. Do not disassemble or remodel.
WARNING Do not put strong force, severe shocks, or throw them. Fire, burns, injury, or electric shock may result. Do not let charging connector, microUSB connection terminal or earphone/microphone jack touch any conductive metal such as metal piece, pencil lead, etc. Also do not put any of them inside. Fire, burns, injury, or electric shock may result. Do not cover or wrap this terminal or its accessories with bedding, etc. while using or charging. Fire or burns may result.
CAUTION Do not place the horizontal charge adapter on unstable locations such as wobbly tables or slanted locations. Injury may result from the terminal falling down. Do not store the horizontal charge adapter in humid, dusty places, or in hot areas. Fire, burns, or electric shock may result. If children use it, a guardian should explain the precautions and correct operations. Also make sure that the instructions are followed during use. Injury may result. Keep out of reach of babies and small children.
Precautions for this Terminal WARNING Do not lighten the light near eyes. Especially, when you shoot photos of babies or infants, keep this terminal 1 m or more away from babies and infants. Vision problems may result. Accidents may result from being blind or being shocked. Do not get liquids such as water, or foreign objects such as metal pieces or flammable materials into the docomo nano UIM card slot or microSD card slot of this terminal. Fire, burns, injury, or electric shock may result.
When boarding an airplane, turn the terminal OFF or turn airplane mode on. As there are usage restrictions in an airplane, follow the instructions from the airline. Failure to do so may cause airplane electronic equipment to fail or malfunction. If you commit any prohibited acts, such as using the phone in an airplane, you will be punished in accordance with the law. When using the terminal in a medical facility, follow the instructions of the facility.
Turn off this terminal in places near high precision electronic devices or devices using weak electronic signals. Electronic devices may be adversely affected by reasons such as malfunction. * Examples to pay attention to when using electronic devices Hearing aids, implanted cardiac pacemakers, implanted defibrillator, other medical electronic devices, fire alarms, automatic doors and other automatically controlled devices.
CAUTION Do not swing this terminal by its strap, etc. It may hit you or someone else and may result in an accident such as an injury. Do not use a broken terminal. Fire, burns, injury, or electric shock may result. When using the motion sensor, ensure the safety of you and those around you, hold this terminal firmly, and avoid extreme movements. Injury may result.
Itching, rash or eczema may be caused depending on your physical conditions or predisposition. If an abnormality occurs, stop using this terminal immediately, and then seek medical attention. • For the material of each part → P23 "Material List" When watching the display, take a certain distance from the display in a fully bright place. Visual loss may result. Precautions for Battery Pack ■ Confirm the battery type from the label of the battery pack.
Do not throw this terminal into fire or heat it. Fire, explosion, getting heated or liquid leak of the battery pack may result. Do not put excessive force such as nailing the battery pack, hitting with a hammer or stepping on it. Fire, explosion, getting heated or liquid leak of the battery pack may result. When the liquid from battery pack splashes into your eyes, do not rub your eyes. Wash your eyes and go to consult with a doctor immediately. Blindness may result.
CAUTION Precautions for Adapter Do not discard it as combustible waste. Fire and environmental pollution may result. Tape the connector to isolate the battery pack and bring it to a docomo Shop or follow the local disposal regulations. Do not use it if the adapter cord gets damaged. Fire, burns, or electric shock may result. Do not use or charge the wet battery pack. Fire, explosion, getting heated or liquid leak of the battery pack may result.
Do not make the charging terminal short out while being connected to the outlet or cigar lighter socket. Do not touch the charging terminal with a part of your body such as your hands or fingers. Fire, burns, or electric shock may result. Do not place heavy objects on the adapter cord. Fire, burns, or electric shock may result. When you insert and remove AC adapter from the power outlet, do not contact a metal strap or any other metal objects with this terminal. Fire, burns, or electric shock may result.
Wipe off any dust that accumulated on the power plug. Fire, burns, or electric shock may result. When you connect the AC adapter to an outlet, do not fail to properly connect to the outlet. Fire, burns, or electric shock may result. When you disconnect the power plug from the outlet or cigar lighter socket, do not pull the adapter cord with excessive force. Instead, hold the adapter to disconnect. Fire, burns, or electric shock may result.
Precautions for Mickey Window Cover CAUTION Do not pinch your fingers when attaching the mickey window cover. Accidents like injuries may result. Precautions for docomo nano UIM card CAUTION Be careful of the cut surface when handling docomo nano UIM card. Injury may result.
You may get closer than 15 cm to people around you who are incapable of moving. Set this terminal to radio signal off beforehand (Airplane mode or power off). People who are using electronic medical equipment such as implanted cardiac pacemakers or implanted defibrillators may be around you. Operations of electronic medical equipment may be adversely affected by radio waves. Display Follow the instructions when using this terminal inside medical facilities.
Part Receiver grill 24 Material STS Surface Treatment Etching hole + buffing + PVD docomo nano UIM card slot Copper alloy (NKC286REH) Nickel + Pd-Ni + Gold plating microSD card slot Stainless Nickel + Gold plating Battery pack connection terminal Ti-Cu Nickel + Pd-Ni + Gold plating FeliCa/NFC connection terminal Copper alloy Nickel + Gold plating Screw STS - Contents/Precautions Part Back Cover L40 Battery Pack L24 Material Surface Treatment Body PC IMD Terminal section Copper + Pi
Part TV Antenna Cable L01 Material Surface Treatment Earphone/ microphone jack (top) Copper Nickel plating Earphone/ microphone jack (outer cover) TPE̲ JS400-78A Non PVC Cable TPE̲ JS400-78A Non PVC Connection plug (top) Copper Gold coating Connection plug (outer cover) TPE̲ JS400-78A Non PVC Part Mickey Window Cover L01 Material Surface Treatment Outer cover polyurethane fiber Logo print Window frame PC SN Deposition, laser etching Decoration Glass Glass processing Interior (Fl
Handling and Care General Usage Guidelines ■ Even though DS1604 provides with waterproofness/dustproofness function, do not let water or dust come into contact with the interior of this terminal or adhere to the optional accessories. The battery pack, adapter, TV antenna cable and docomo nano UIM card do not have waterproofness/dustproofness function. Do not use them in places with high humidity such as a bath or where rain may get it wet.
■ Do not place excessive force on this terminal, battery pack, etc. If this terminal is inserted to a full bag, or placed in a pocket and sat on, the display, its internal PCBs and battery pack may be damaged or malfunction. Also, if an external connection device is connected to a microUSB connection terminal or earphone/microphone jack, damage or malfunction may result. ■ Do not rub or scratch the display with metal. The display may get scratched and it may cause malfunction or damage.
■ It is normal for this terminal to become warm during use or charging. You can continue using without problems. ■ Do not leave the camera under direct sunlight. Discoloring or burn-in of materials may result. ■ Do not use this terminal without its back cover attached. Falling off the battery pack, damage or malfunction may result. ■ While using the microSD card, do not remove it from this terminal or turn this terminal off. Data loss or malfunction may result.
Notes about the Adapter ■ Charge in an environment with the proper ambient temperature (5℃ to 35℃ ). ■ Do not charge in the following places. • Places that are very humid, dusty or exposed to strong vibrations. • Near ordinary phone or TV/radio. ■ It is normal that the adapter becomes warm while being charged. You can continue using without problems. ■ Use the DC adapter only when the car engine is running. The car battery may be exhausted.
Notes about the docomo nano UIM card ■ Do not put excessive force on the docomo nano UIM card when inserting into or removing from this terminal. ■ Note that DOCOMO assumes no responsibility for malfunctions occurring as the result of inserting and using a docomo nano UIM card with other IC card reader/writer. ■ Always keep the IC portion clean. ■ Clean it with a dry, soft cloth (lens cleaning cloth), etc. ■ Be sure to keep a separate note of the information registered on the docomo nano UIM card.
■ Frequency band The frequency band that the devices with Bluetooth® function and WLAN equipped uses is written on the insertion part of the batter pack on the main unit of this terminal. It shows how to read the label below. 2.4FH1/DS4/OF4 2.4 : This radio equipment uses the 2400 MHz band. FH/DS/OF : Indicates that modulation methods are FH-SS, DS-SS or OFDM format.
Notes about Wireless LAN (WLAN) ■ Wireless LAN (WLAN) uses radio waves to enable data communications between compatible devices, thus allowing connection to a local area network from anywhere within range. However, there is a risk of data interception by malicious third parties unless security is established. Users are advised to assess their responsibilities and accordingly configure security settings.
■ 5 GHz Bandwidth Cautions The terminal can use 3 frequency bands of 5.2 GHz band (W52), 5.3 GHz band (W53), 5.6 GHz band (W56). • W52 (5.2GHz bandwidth/36, 40, 44, 48 ch) • W53 (5.3GHz bandwidth/52, 56, 60, 64 ch) • W56 (5.6GHz bandwidth/100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140 ch) Using outdoors in 5.2/5.3 GHz (W52, W53) outside is prohibited by the Radio Law.
■ Be careful when using this terminal while driving. Using this terminal in your hand while driving is subject to punishment. However, absolutely necessary cases such as rescue of a sick person or maintaining public safety are exempted. ■ Only use the FeliCa reader/writer function in Japan. The FeliCa reader/writer function for this terminal is compliant with the radio standards for Japan. Overseas usage may be subject to punishment. ■ Do not make unauthorized modifications to the basic software.
What You can Do with Waterproofness of DS1604 • You can talk without an umbrella in the rain (for rainfall of 20 mm or less per hour). • You can wash this terminal by soaking in a sink of fresh water or in tap water at room temperature (5℃ to 35℃ ) and gently shaking it. - Attach the back cover/mickey window cover. - Do not use any brush, sponge, soap, detergent, etc to wash this terminal. - Wipe off moisture on the surface with dry cloth and drain the water after washing.
Attaching the back cover a Confirm the orientation of the back cover and align it with the main unit, press 〇 parts firmly to attach the back cover • Make sure that there are not any gaps between the cover and this terminal.
Attaching mickey window cover a Confirm the back cover section orientation of the mickey window cover and align it with the main unit, press 〇 parts to attach the mickey window cover firmly Detaching mickey window cover a Put your finger in the groove which is on the side of the back cover section of mickey window cover and hold it up in the direction of the arrow to detach • Make sure that there are not any gaps between the cover and this terminal.
Precautions Do not pour or put in liquid etc. other than water at room temperature shown in the illustrations below. Soap/Detergent/ Seawater Bath powder Pool water Hot spring water Sand/Clay Follow the following precautions to use correctly. ■ This terminal • Do not subject this terminal to severe shocks, or drop it. Deterioration of waterproofness/dustproofness may result due to crack or flaw. • Do not put this terminal in hot water, use it in a sauna or apply hot air from a hair dryer etc.
• Do not pick earpiece (receiver), mouthpiece (microphone), sub microphone, speaker, earphone/microphone jack or microUSB connection terminal. The waterproofness/ dustproofness may not be effective. • Do not leave water drop in the earpiece (receiver), mouthpiece (microphone), sub microphone, speaker or earphone/ microphone jack. Malfunction may result. • Do not leave water drop in microUSB connection terminal or earphone/ microphone jack. This terminal may short out.
Draining Water When this terminal gets wet, make sure to drain the water in the following steps. • Using this terminal with water drop, the volume of speaker etc. becomes low and the quality may change. a 40 Wipe off moisture on the surface with a dry cloth Contents/Precautions b Shake this terminal approximately 20 times for each side, firmly holding it, until there is no more water splattering • Visually confirm if no water drops are on this terminal.
c Gently press this terminal to a dry and clean cloth to wipe off water remaining in the gap between earpiece (receiver), mouthpiece (microphone), sub microphone, speaker, earphone/microphone jack, microUSB connection terminal, key, etc. • Do not wipe off the remaining moisture in the gaps directly with a cotton swab etc. d Wipe off water drained from the terminal with a dry, clean cloth etc., and dry naturally • Water, if any, remaining in the terminal may ooze up after wiping off.
Confirmation and Settings before Using Part Names and Functions a Earpiece (receiver) 1 2 b Proximity sensor* /Illuminance sensor* (all-in-one) c Front camera d Notification LED Light 3 e Hall-IC sensor* f Display (touch screen) g Mouthpiece (microphone) h Strap holder 42 Confirmation and Settings before Using
i Earphone/microphone jack j Sub microphone • When speaker phone is in use. 4 k Sub antenna area* l Main camera m Flash ® ® 4 n Bluetooth /Wi-Fi antenna area* 4 o GPS/sub antenna area* p Volume key (up) q Power key r Volume key (down) 4 s Sub antenna area* t mark 5 u Back cover* v Speaker 4 w FOMA/Xi antenna area* x microUSB connection terminal • You can use a SlimPort supported cable purchased in stores.
*1 *2 *3 *4 *5 Set touch screen to on or off to prevent unwanted operations from happening when your face touches the screen during calling. Sense the surrounding brightness and adjust the screen brightness automatically. The sensor is used to recognize if the mickey window cover is open or close. Antennas are built in this terminal. If you cover the antenna area with your hand, its quality may be affected. Do not peel off the sticker on the back of the back cover.
docomo nano UIM card Security Codes You can set the security code named PIN in docomo nano UIM card. "0000" is set at the time of subscription. Customers can change PIN afterwards. For details about PIN of docomo nano UIM card, refer to "PIN code" (P213).
Note • When handling the docomo nano UIM card, be careful to not touch the IC chip, or get it scratched. • Note that the docomo nano UIM card may get damaged if you attach or remove it forcedly. • Do not lose the docomo nano UIM card you removed. Battery Pack • Please use the dedicated Battery Pack L24 for this terminal. • Make sure to turn off this terminal beforehand and hold it in your hand when attaching/ removing the battery pack or the back cover so that the display does not get damaged.
Removing Battery Pack a b Charging Detach the back cover (P36) Hold the battery pack up in the direction of arrow mark using the concave part of the terminal with your fingertip, and then remove it Battery Charge • For detailed information, refer to instruction manuals for AC Adapter 05 (optional) and DC Adapter 04 (optional). • AC Adapter 05 can be used from AC 100 V to 240 V. • The shape of AC adapter plug is for AC 100 V (Japanese specification).
• Make sure to remove it from the power plug of AC adapter after finishing charging. • When charging with unstable rated voltage, battery may not get charged or charging may fail. Do not charge for a long time (for several days) • If the terminal is left for a long time after being fully charged, the battery pack starts feeding the terminal when the charging is complete. For that reason, the actual battery time may shorten and the battery may be used up. If this happens, please charge it again correctly.
Charging with AC Adapter It describes how to charge this terminal with AC Adapter 05 (optional). c When charging is completed, remove the power plug of AC adapter from the power outlet d Remove the microUSB plug of AC adapter horizontally from this terminal ■ DC Adapter 04 The DC adapter supplies power to charge this terminal through a cigar lighter socket (12 V/24 V) in a vehicle.
Charging with a PC Power On/Off Connect this terminal to a PC by the microUSB Cable 01 (optional) to charge. a Insert the microUSB plug of microUSB Cable 01 into the microUSB connection terminal of this terminal Power On a Press and hold the power key for over two seconds • This terminal vibrates and the lock screen is displayed after a while. • After purchasing this terminal, when it is turned on for the first time, follow the onscreen instructions to perform the initial settings (P64).
Turning on Backlight To prevent unwanted operations and to save power, the backlight turns off after a certain time duration you set up and the screen is locked after then. a Press the power key • Backlight lights on and the lock screen is displayed. • Press power key again to black out the backlight and lock the screen. ■ KnockON/KnockOFF Quickly tap the blacked-out screen twice to light the backlight.
Lock Screen Basic Operations This terminal adopts touch screen which allows you to operate by touching the display. Using Touch Screen Precautions on using touch screen a Date & time, current location b Notification information display area Displays the details of two latest notifications and the number of unread notifications. c Application shortcut • Swipe to start the application. • When you have missed calls, a number (notification number) may be displayed on the icon.
Touch screen operations ■ Flick : Touch the screen and quickly sweep your finger • Flick so that the screen scrolls at high speed. While scrolling, touch the screen to stop scrolling. ■ Pinch-out : Touch the screen with two fingers and then move them apart • Pinch out to enlarge the screen. The following operations are available on the touch screen.
■ Pinch-in : Touch the screen with two fingers apart and then move them together, as if pinching • Pinch in to reduce the screen. Back key Tap to go to the previous screen. Close a dialog box, an option menu, the notification panel or the on-screen keyboard. Home key Tap to display the Home screen. Home Touch Buttons You can change the layout and the color of the home touch buttons, you can also display/hide the home touch buttons of the application in use. • Up to five home touch buttons can be assigned.
Auto Rotating Screen This terminal screen automatically rotates to landscape or portrait views, depending on the direction in which it is turned. • Depending on the display screen, the screen orientation may not change on this terminal. • Even if this terminal is oriented close to being level in relation to the ground, the landscape/ portrait view does not change.
a Go to full screen display/previous size and display it. Enable this mode to restrict the terminal settings and functions to save the battery power. c Close the QSlide apps. a Press and hold the power key for over two seconds b "Emergency mode" X confirm the contents on the screen X "OK" d Adjust the display size. Editing QSlide apps a b 56 Emergency Mode b Adjust background transparency.
Disabling emergency mode a Press and hold the power key for over two seconds b "Emergency mode" X "OK" • From the Home screen of the emergency mode, tap "Stop saving" X "OK" to disable the emergency mode. • Restart this terminal and disable the emergency mode. 10key keyboard/QWERTY keyboard ● 10key keyboard It is a keyboard similar to a general mobile phone keyboard (for multi-tap method). Tap a key assigned character you want to enter several times until the target character is entered.
a Voice input/Keyboard type key/Handwriting input key/Clipboard key/Setting key/ Reverse order key • Switch to Voice input mode. • Touch and hold down to display keyboard function button panel. - Tap to switch to voice input mode. It is not displayed when setting not to use voice input. - Tap (QWERTY keyboard)/ (10key keyboard) to switch "10key keyboard" and "QWERTY keyboard". - Tap to display handwriting input keyboard. - Tap to display clipboard. - Tap to display "LG Japanese keyboard" menu.
e Delete key • Delete the character on the left of cursor. • Touch and hold down to delete the characters continuously. f Right cursor key • The highlight moves to the right. • Touch and hold down to move it continuously. • It can also widen the conversion range. g Space key/Convert key • Enter a space. • " 変換 (convert)" is displayed during Hiragana input and a list of conversion candidates is displayed.
c Quick cursor key Move the cursor to the beginning or the end of a sentence. Handwriting converting keyboard d Select all Select all the characters. e Copy key Copy the selected text. f Paste key Paste the copied/cut text. g Delete key • Delete the character on the left of cursor. • Touch and hold down to delete the characters continuously. h Select/Deselect key • Select a target. • You can change the area with arrow key. • With deselect key, you can deselect the selected area. i Space key Enter a space.
c Symbol key Display a list of pictographs, symbols, emoticons and pictogram-D list. d Keyboard type key/clipboard key/setting key • Switch to the software keyboard that was displayed prior to the handwriting converting keyboard display. • Touch and hold down to display clipboard key and setting key. e Space key Enter a half space. f Left cursor/Right cursor • Move cursor position. • Touch and hold down left cursor key to switch to arrow key mode. h Delete key • Delete the character on the left of cursor.
Changing Character Entry Settings Touch and hold down on a character entry screen and tap to display "LG Japanese keyboard" menu. Tap "Keyboard Settings" to change the character entry settings. When inputting characters, set key popup, sound and vibration, etc. Voice input Set if enable voice input or not. Handwriting Set handwriting settings. COMMON SETTINGS 10key keyboard Set flick input and auto cursor movement.
EXTERNAL APPLICATION ABOUT IME Input Extension plug-in Help Display Help of LG Japanese keyboard. In Help, you can confirm descriptions of function key usage, Split keyboard and One-handed operation mode. Keyboard version Detailed information on LG Japanese keyboard is displayed. Set to use Input Extension plug-in or not. • To use Input Extension plug-in, download "WnnDictionary" (search in dictionary) / "WnnBrowser" (connect to URL) / "WnnSearch" (search inside Website).
Initial Settings c First-time Settings When the Power is Turned On • Follow the on-screen instructions to set up the items below, and tap "Next". - docomo ID - docomo cloud - docomo apps password - docomo location information - Remote Initialization Service* - Installing applications collectively * Does not displayed when docomo apps password has not been set up.
Note • You can change the settings later. • Before setting online service, make sure that the data can be connected (LTE/3G/GPRS), or make sure that the Wi-Fi® network is being connected. • Even when the Google account has not been set up, you can still use this terminal except for the usage of Google service such as Gmail or Google Play. Notification LED About Notification LED Light This terminal notifies you of its status via the lighting up or blinking Notification LED light.
Setting Notification LED Light a b c From the Home screen, "Apps" X "Settings" X "Display" X "Notification LED" Turn on "Notification LED" Place a check mark in features to get notifications Note • The notification display of Area Mail and alarm cannot be changed. 66 Confirmation and Settings before Using Screen Display/Icons Status Bar The status bar is displayed at the top of the screen. The status and notifications of this terminal are displayed on the status bar.
Main status icons (blinking) Signal strength No service Battery is empty Charging Airplane mode activated (grey) Bluetooth® function is on (white) Connecting to a Bluetooth® device docomo nano UIM card locked or docomo nano UIM card not inserted During international roaming Manner Mode (vibrate only) 3G available/communicating (arrow is gray in standby, white while sending/receiving) Manner Mode (Do not disturb) / / LTE available/communicating (arrow is gray in standby, white while sending/rece
Main notification icons New Gmail New Email New message (SMS) New Area Mail Problem with message (SMS) delivery New Hangouts message Incoming call, making a call*, answering a call* Receiving a video call or talking on the phone* 68 Playing music via music application Playing music via Media Player Detected an Open Network (WiFi®) Connecting to the Wi-Fi® of unavailable Internet Connecting with USB Charging completed Slow charging Low free space of memory on this terminal Data upload completed Missed call
Start of docomo ID settings interlinking Watching Full seg Recording TV (Full seg/1Seg) Authorization failure of docomo ID settings Recording TV (Full seg/1Seg) is finished docomo backup application notification More notifications docomo application location information ON Connecting VPN ® Wi-Fi tethering available USB tethering available Bluetooth® tethering available ® Connecting Wi-Fi Direct Face is recognized via Smart screen (backlight is lit up) The application provided by LG Electronics Inc.
Notification Panel You can confirm the notification icons, start an application or turn on/off a function in the notification panel. Viewing notification panel a Drag or swipe the status bar downward a Date & time Display date and time. b Quick setting icon field Switch each function on/off. • ON is displayed in aqua color, OFF is displayed in gray color. • Scroll to right and left to display the hidden icons. • Touch and hold down to display the setting menu screen of each function.
g Telecommunications carrier name/SIM carrier name On the left, the name of currently connected telecommunication carrier is displayed; on the right, the carrier's name read from docomo nano UIM card is displayed. h Setting button The "Settings" screen is displayed. i Delete notification Delete notification information and icons. Some notifications cannot be deleted.
Changing to photo icon Customizing icons You can change the icon design such as shortcut to use on the Home screen. Note • From the Home screen, "Apps" X "Settings" X "Home screen" X "Select Home" X usable only when "Home" is selected. You cannot customize icon when using the docomo LIVE UX. You can use a photo from camera and gallery as the icon for the Home screen.
Home Screen Note • Pinch out the Home screen to enlarge the wallpaper till it becomes full screen. Pinch in the wallpaper enlarged till it becomes full screen to return to the Home screen. Viewing Home Screen Home Screen Management Adding Home screen a b Pinch in on the Home screen • Home screen list is displayed. "+" • Up to seven screens can be added. Note a Widget b Machi-chara c Apps d Current location of the Home screen Flick to right/left to switch the display.
Adding an application or widget a From the Home screen, touch and hold down an area with no application icon or widget b c "Apps" or "Widgets" Tap a desired application icon or widget to add Deleting from the Home screen of an application or widget a From the Home screen, touch and hold down a desired application icon or widget to delete b Drag the item to "Remove" on the top of the screen Changing wallpaper Moving an application or widget a From the Home screen, touch and hold down a desired a
Apps Screen Viewing Application Screen a From the Home screen, "Apps" Apps List Some applications require a separate subscription (charge). Applications not included in the folder Disney マー ケット (Disney Market) In Disney Market is a convenient portable application where you can obtain various "Disney apps" and the recommended information.
Dlife Disney Mail Maker Disney Welcome 76 Enjoy dramas, movies, variety shows and news which are popular worldwide anytime and anywhere! Bestselected programs are delivered from "Dlife", a BS channel, which advises you that new styles be applied on your everyday selections. A Deco-mail® converter app which can be activated from docomo mail.
Window Setting* Select a Disney character and change the window image, live wallpaper, ringtone, etc. of the mickey window cover collectively. Tokyo Disney Resort® Machijikannabi An app to check your present location on the map of Tokyo Disneyland/Tokyo DisneySea and get various information such as waiting time for attraction. "Happiness is Here" Live Wallpaper Provides children of all generations with music, dream and friendship... Let's share superb "Happiness".
docomo mail 78 It is an application for sending/receiving mails using DOCOMO mail address (@ docomo.ne.jp). Sent/ received mails are saved in cloud. You can view the same mail on the multiple devices or transfer mail data easily when changing model. Pictograms and Decomail® are available. Also it supports auto receive. (P119) Settings Set various settings. (P184) Chrome Google web browser application. Maps Check current location or search a destination with Google Maps.
Calendar View calendar and manage schedule. (P177) Clock Set settings of alarm, timer, world clock and use stopwatch. (P174) Memo QMemo+ IC Tag/ Barcode Reader Creating/managing memos and the data is shared with Schedule application. It supports i-concier. You can simply write a memo without having to launch Memo application. You can also input texts or illustrations directly on the captured screen. (P179) An application for reading information written in IC tags and barcodes.
dmenu Shortcut application for "dmenu". You can easily search useful contents for smart phones as well as contents familiar in i-mode. (P134) dmarket There are various contents such as music, e-books. You can purchase something that suits your needs. (P134) ｉコンシェル (i-concier) 80 This application is for using i-concier. i-concier is a service supports your life as "butler" or "concierge" via a mobile.
データ保管 BOX (Data Storage BOX) An application for using データ保管 BOX (Data Storage BOX). Data Storage BOX is a service which allows you to upload files to easily manage them in the cloud. フォトコレク ション (Photo collection) A service with which you can back up photos or videos to cloud up to 5 GB for free and access them from smartphone, tablet, PC, etc. File Manager Search, edit or delete the data inside internal storage, microSD card or cloud storage.
Anshin Scan shoplat My Magazine 82 Ensure your smartphone by checking virus, applications which require your personal data, by alerting when you attempt to access a nonsecure website, etc. Go to any member's shops and check in so that you can get credits or coupons. Then use the credits you get to exchange for gift voucher from the member's shops or credits. My magazine is a search service that shows articles of the genre that you selected.
Google Photos View pictures and movies. You can also sync with Google Photos to backup images and share them with others. Setup a Google account and send/ receive emails via Gmail. (P127) Hangouts Chat using Google Hangouts. Google Settings Make settings for Google applications. Google+ Use Google SNS. Docs Play Movies & TV Purchase videos from Google Play. Create and edit a document. You can also edit with other users. Play Books Purchase books from Google Play.
Applications not included in the folder Instruction Manual Instruction manual for this terminal. Available to activate a desired function directly from the description. * This application is used in the supplied Mickey Window Cover L01. Note • This application list is preinstalled in this terminal at the time of purchase. Some preinstalled applications can be uninstalled. Those uninstalled applications can be downloaded again from the "Play Store", etc (P136).
Window Screen Attach the Mickey Window Cover L01 to this terminal and close the flip section to display the window screen. You can use an application or answer a phone call, etc. through window screen. • It is necessary to turn on "Mickey Window Cover" in the setting menu of this terminal (P222). • When the screen backlight is blacked out, execute the KnockON (quickly tap the screen twice) to turn on the backlight. Note • The notification icon will not be displayed after two seconds.
c Music application Play music, pause, etc. • Select a music to play via the music application beforehand. Available Functions Answer a call*1 You can answer a voice call. Also you can end/hold a call. • Although notification screen for video call is displayed, you cannot answer it. Open the flip section and follow the onscreen instructions. Notification for miss calls*2 When there is a missed call, the notification icon will be displayed.
Cancel auto lock Stop alarm *1 *2 (P222) Stop the alarm. During voice call, the window screen backlight blacks out two seconds after the call started. The notification icon of a missed call/new message/new Email will not be displayed after two seconds. After the window screen backlight blacks out, the notification icon will be displayed after lighting up again. Task Manager Confirm/end the running application. a • Tap an thumbnail to start the application.
docomo LIVE UX Viewing Home Screen When the home application is switched to docomo LIVE UX, the description of how to view the Home screen is shown below. a Widget b Machi-Chara c Application Start the application. d Location of current Home screen Flick to left/right to switch the display. e Dock Displayed even when the Home screen is switched. • Application button: Displays the application screen. • My Magazine button: Displays My Magazine (P97).
Home Screen Management Change Kisekae The background, wallpaper, font color and the indicator image are changed. Change wallpaper Display wallpaper list. Set wallpaper either by tapping a wallpaper or touching and holding down a wallpaper and locating it on the Home screen. Machi-Chara display setting Set if display MachiChara and the operation settings. • Touch and hold down the Machi-Chara on the Home screen to set the settings. Home screens Display Home screen list.
Moving an Application Deleting a Widget, etc.
Changing Folder Name a From the Home screen, tap a folder to change its name b c Tap the folder name Enter a new folder name and tap "Done" X tap the screen Changing Kisekae Change the Home screen wallpaper, and change the image. a From the Home screen, touch and hold a wallpaper in which applications or widgets, etc.
Adding a Home Screen a From the Home screen, touch and hold down an area with no application icon or widget X "Home screens" Deleting a Home Screen a • Pinch in on the Home screen to display the Home screen list. b "Add Home screen" • Add up to 7 pages. Sorting Home Screens a From the Home screen, touch and hold down an area with no application icon or widget X "Home screens" • Pinch in on the Home screen to display the Home screen list.
From the Home screen, "Apps" a "Apps" tab Among the pre-installed applications, those that are not on the Home screen are displayed here. Select an application to activate. • Drag or swipe the Home screen downward to display the application screen. b "Widgets" tab Add a widget to the Home screen. Viewing Application Screen a c "Wallpapers" tab Change wallpaper. d "Recommends" button Install applications recommended by docomo (P95). e Menu Display menu such as Search, Settings, Help, etc.
Application Management Moving an Application to Home Screen a b From the Home screen, "Apps" c Drag it to the Home screen field and release your finger Touch and hold down an application icon to move to the Home screen Moving an Application 94 a b From the Home screen, "Apps" c Drag it to the destination and release your finger Touch and hold down an application icon to move docomo LIVE UX Uninstalling an Application a b From the Home screen, "Apps" c Drag it to "Uninstall" and release your fi
Installing an Application from "Recommends" Displaying All the Applications The applications recommended by docomo are displayed on "Recommends" screen. The function searches for the position of an application. a b From the Home screen, "Apps" a c Tap an application to install "Recommends" button • When activating for the first time, tap " お すすめアプリを見る (See more applications)". • Follow the on-screen instructions and install the application.
Backing up and Restoring the Home Screen You can restore the layout of your applications and widgets in your Home screen by using the docomo LIVE UX data backed-up in docomo cloud. At this time, the docomo service page will be added to the end of your Home screen. Backing up Home Screen a Touch and hold on the Home screen X "Layout backup and Restore" • For the first activation, terms of use appears. Read the contents, and tap "AGREE".
Setting Categories My Magazine My Magazine is a retrieval service to show articles from categories you selected. It learns your preference by helping to set retrieval word according to your reading history and profile information. a From the Home screen, "My Magazine" a From the My Magazine screen, "Display category setting" b Place a check mark in a desired genre to display, "OK" X • Tap "Sort" and drag the of the genre to sort the order of the genres. • My Magazine screen is displayed.
Viewing Articles a • The genre to be displayed is switched. • Flick the My Magazine screen downward to display the Home screen. • Tap "See more info" to display more articles about this genre. b c Tap a desired article to display • Overview of the article is displayed. • Depending on the article, it may be able to access to the external link directly. • Tap "ミンナのツイートを見る (See everyone's tweet)" to view the posts on Twitter that related to the article.
Calling Making a Call a From the Home screen, "Phone" X "Dial" tab a "Phonebook" button Activate "docomo phonebook" application. b Tab "Dial" tab: The dial screen is displayed. "Recent calls" tab: Recent calls screen is displayed (P109). "Favorites" tab: Contacts list added to the Favorites is displayed. c Phone number entry field Display an input phone number. d Dialpad e Call button f Menu Display menu. g Delete button Delete a number at the far right.
b Enter a phone number X c Tap "End call" to end a call ■ When making video call X "Video call". Note • You can make voice calls and video calls in high quality with VoLTE. To use VoLTE, you and the other party both need to meet the following conditions. - The device supports VoLTE. - It is within the Xi area (You cannot use VoLTE outside the Xi area or during international roaming).
Adding a standby ";" Entering a Pause Use "Add 2-sec pause" or "Add wait" to dial phone number and additional code in a row when sending an additional code during a call is required for bank balance inquiries, ticket reservation services, etc. Adding a two seconds pause "," Automatically dial a service number twosecond pause later after calling. After calling, a message is displayed to confirm the number you dialed of a desired service.
Emergency Call Emergency call Phone number Police 110 Fire department or ambulance service 119 Japan Coast Guard 118 Note • This terminal supports "Location notification of emergency call". When dialing an emergency number such as 110, 119 or 118, information of the place where you called (location information) is automatically notified to the agency that you called (e.g. a police station).
• In Japan, when docomo nano UIM card is not inserted in the terminal, the emergency numbers of 110, 119 or 118 are not available on the PIN code entry screen or during PIN code lock/PUK lock. • If you make an emergency call 110, 119, 118 with call rejection setting enabled, call rejection setting/Blocking mode will be disabled. • You may not be able to make an emergency call on some networks. • You can not make emergency calls with video calls.
Calling a mobile phone a From the Home screen, "Phone" X "Dial" tab b "010" X country code X recipient's mobile phone number, and tap c Tap "End call" to end a call Receiving a Call For Voice Calls a Note • If a mobile phone number or an area code of the other party begins with "0", remove the first "0". However, the first "0" is required when calling to some countries or regions such as Italy.
For Video Calls a b c When there is an incoming call • "(high-quality sound)" is displayed.
Calling/Sending an SMS to a Missed Call When you have a missed call, you can check the notification from status bar. a If appears in the status bar, drag or swipe the status bar downward • Missed call notification appears on the notification panel. b Operations during a Call The following operations are available while talking on the phone. • Press the volume key (up)/volume key (down) during a call to adjust the volume.
b Name and phone number c End End a call. For Video Calls d Dialpad Display dialpad and send push signal (DTMF tone). 1 e Hold* Put a call on hold. 2 f Add call* Call another party. g Call duration 1 h Mute* You voice cannot be heard by the other party. 1 i Speaker* You can hear the other party's voice through speaker to talk hands-freely. j Switch to video Switch to video call. Tap again to return to the previous state. Subscription is required for "Call waiting".
d Switch cameras Switch the cameras for the image to send to the other party from the front side or back side. e End End a call. f Menu Display the menu for calling screen. X tap "Switch to voice call" to switch to • voice call. X tap "Dialpad" to turn off the camera • and display the dial screen. X tap "Switch audio output destination" • to switch audio output ports. X tap "Camera OFF" to stop sending • video to the other party.
Call Logs On the Recent calls screen, you can check logs of dialed calls, received calls, missed calls in the list. • Up to 500 items can be displayed. a From the Home screen, "Phone" X "Recent calls" tab a Phonebook Activate "docomo phonebook" application. b Tab "Dial" tab: The dial screen is displayed (P99). "Recent calls" tab: Recent calls screen is displayed. "Favorites" tab: Contacts list added to the Favorites is displayed. c Switch logs • Switch display between Incoming and Outgoing.
g Voice call key Make a voice call to the number in the call log. Deleting History a b c From the Home screen, "Phone" X "Recent calls" tab X "Delete log" Place a check mark in the history to be deleted or in "Select all" X "Delete" X "Delete" • The history is deleted and it goes back to "Recent calls" tab screen. Answering Memo When you cannot answer a call, playback reply message and record an answering memo.
• To check the answering memo you recorded, drag or swipe the status bar downward with displayed on the status bar X "New answering memo", or from the Home screen tap "Phone" X X "Call settings" X "Answering memo" X "Play answering memo". Tap a answering memo to playback and tap again to stop playback.
Network service Call notification English guidance Guidance such as voice guidance or Network service guidance is played back in English. Remote operation settings Set remote operation settings to operate remotely from a docomo mobile phone, a fixed line telephone or an NTT pay phone. Public mode (power OFF) settings Roaming settings 112 Calling A missed call is notified by SMS when the power is off, when you are out of service or when it is unavailable to receive a call.
OTHER SETTINGS Phonebook Call mode setting Set whether to use VoLTE when VoLTE calling is available. Call time Display or reset the cumulated call time. Set whether to reset the cumulated call time on the first day of each month. Contact docomo Inquire DOCOMO about malfunctions, loss/ theft while overseas. Also you can call General inquiries to DOCOMO. Open source licenses Open source license is displayed. * Not available for video call.
a Account A saving account appears. • Tap "Set" to select an account. b Image field Tap "Set" to register an image. To take a photo, tap "Take photo". To select a saved image, tap "Select picture". c Last name, first name d Label key Select a content label (item). e Input field Input phone number, mail address, address, etc. f Ring tone setting button g Add other items Input the address, nickname, memo, etc.
Confirming/Using Contacts a From the Home screen, "Apps" X "docomo phonebook" • A contact list screen appears. c Photo set in the phonebook By tapping the other party's image registered in the phonebook and then tapping the icon, you can make a call, create SMS or email, etc. d Register (P113) Add new contacts. • If you have registered more than one account, select one to add a new contact to and complete the required items. e Start/Stop synchronize cloud f Menu Display menu.
b Tap a contact to confirm or use • Profile screen is displayed. • Tap "Edit" to edit contacts. • Tap in phone number field to make a call. Or tap the phone number to create SMS or make video call. • To create a mail, tap a mail address and select an application. Change Displayed Account on Phonebook You can set to display or to hide the contacts included in a group of a specific account or a Google account.
Adding contacts to group Adding/Editing a Group a From the Home screen, "Apps" X "docomo phonebook" X "Group" tab b "Add group" ■ To edit a saved group Tap a group you want to edit X "Edit" X Edit and then tap "OK". ■ To delete groups X "Delete group" X place check marks in the groups you want to delete X "OK" X "OK". ■ To change display order of groups "Sort" X Tap a group X Drag the group to a desired place X "OK".
Registering My Profile You can confirm your phone number, and add, edit or delete your profile information. a From the Home screen, "Apps" X "docomo phonebook" X "My profile" tab b "Edit" X Enter the required items X "Save" Importing/Exporting Contacts Import contacts or send the contacts as the contact data (vCard) between docomo nano UIM card and this terminal.
Mail/Web Browser docomo mail You can send and receive emails using an i-mode mail address (@docomo.ne.jp). You can use pictogram and Deco-mail®. Mails can be received automatically. Since sent/received mails are stored to docomo mail server, your mails can be transferred easily in case the terminal is lost or you change the model. With docomo ID, you can use mail with PC. tablet, etc. For details, see NTT DOCOMO Website. a SMS You can send/receive text message to/from mobile phone number as a recipient.
e "Send" Note • Default message application can be changed to Hangouts. → P209 • While entering a message, X "Insert smiley" to insert a smiley. • To notify whether messages (SMS) are received, from "Messaging" screen X "Settings" X "Notification settings" and place a check mark in "Notifications". • You can also send/receive text messages to/from customers using overseas network operators. For available countries/overseas network operators, see NTT DOCOMO website.
Changing SMS Settings a From the Home screen, "Apps" X "Messaging" Notification settings Notification sound* Set ring tone when receiving a message. Vibrate* When receiving a message, set to notify by vibration or not. Repeat alert* Set to notify repeatedly or not. • "Messaging" screen is displayed. b c X "Settings" Change the settings if necessary Notification settings Notifications Set to display the notification of new messages or not.
Conversation theme Set thread wallpaper and bubble style. • Tap "Gallery"/ "Camera" in "Wallpaper" tab to set a still image saved on this terminal or taken by the camera as the thread wallpaper. Quick message Add/edit a phrase. Connect to URL Set to open a web page by tapping a URL in a message or not. Send message with Enter key When it is not connected to Bluetooth® keyboard, set to send a message via Enter key or not. * Only available to set up when placing a check mark in "Notifications".
Displaying Received Email a From the Home screen, "Apps" X "Email" Creating and Sending Email From the Home screen, "Apps" X "Email" a • New emails are received automatically. b On "Inbox" screen, tap an email • The message is displayed on email screen. • "Inbox" screen is displayed. b c Tap "To" box to enter a recipient's email address • A list of address beginning with the entered number or name is displayed. • Tap to display phonebook and select a recipient.
Adding an Account Changing Email Settings You can add more than one account on "Email" application. a From the Home screen, "Apps" X "Email" Basic settings a • The "Inbox" screen is displayed. b c d e f 124 X "Settings" "Add account" Select an email provider Enter an email address "Manual setup"/"Next" • Follow the on-screen instructions. • Select an account type when tapping "Manual setup". Follow the on-screen instructions to make the settings.
Setting account Load linked images Set to display the image which is linked to an email or not. Ask before deleting Set to display the confirmation screen or not when deleting an email. Autoadvance Select a screen to display after deleting/ moving an Email. Resize image Set the file size of an image attached to an Email. Account name Set account name. Your name Set user name.
126 Days to sync email*2 Set the number of days to synchronize the Emails. Message size limit Set message size. Delete from server*1 Set the timing to delete from server. Download over Wi-Fi*2 Set to download the attached file or not when Wi-Fi® is connected. File size for Wi-Fi download*2 When "Download over WiFi" is ON, set file size for files downloaded via WiFi®. Account & sync Synchronize data with other accounts or delete accounts. Auto resend times Set the number of times for auto sending.
Creating and Sending Gmail Gmail Gmail is an online email service of Google. You can send and receive emails by using Gmail preinstalled in this terminal. • To use Gmail, you need to set up the mail address. When the mail address setting screen is displayed, follow the on-screen instructions to set up before implement the Gmail. X • For details on Gmail, from Gmail screen, Tap "Help & feedback" to refer.
Viewing Area Mail Early Warning "Area Mail" Area Mail is a service with which you can receive emergency earthquake flash reports delivered by the Meteorological Agency etc. • Area Mail is a free service that does not require application. • You can save up to 50 mails. • Area Mails cannot be received when the power OFF, in Airplane mode, during International roaming, while displaying the PIN code entry screen, etc. Also if the terminal is low on memory, receiving Area Mail may fail.
Setting Early Warning "Area Mail" You can set whether to receive Area Mail or behavior when Area Mail is received. a b c From the Home screen, "Apps" X "Disaster Kit" X "Early Warning 'Area Mail'" X "Settings" Change the settings if necessary Receive setting Set whether to receive Area Mail. Beep tone Set the buzzer sound, ring time of beep tone and the performance of manner mode (Vibrate only, Do not disturb).
c Switch windows It switches to the window you selected to access to a web page in case of multiple windows. Tap to close the window. d Menu Display browser menu (P132). Note • When search box and icon are not displayed on the top of the screen, scroll the browser screen downward to show them. • Pinch out or pinch in a web page to zoom in or zoom out the display. • Even the web page is made for a PC, you can also zoom in, zoom out or scroll the display.
Searching a web page by voice a b c From the Home screen, "Internet" X tap the search box e a • "Speak now" is displayed. Speak the keyword(s) clearly to the microphone • The search keyword result list is displayed. d Opening incognito tab You can browse web pages without leaving any browsing history or searching history. From the Home screen, "Internet" X X • A new tab opens and the description of secret mode is displayed.
Using Browser Menu a 132 From the Home screen, "Internet" X Forward The next web page is displayed. New tab A new window opens and the most frequently used websites are displayed. Bookmarks "Bookmarks" tab is displayed. Add to bookmarks Add a web page to bookmarks. Homepage Home page is displayed. Share Use an application or service to share web page. Find on page Enter a keyword to search strings inside the web page. Desktop view Website of PC version is displayed.
Using Bookmark and History Add a web page to bookmarks to quickly access to the web page. You can display browsing history to view web pages your visited previously. Adding bookmark From the Home screen, "Internet" X display the web pages to be added to the bookmark a b c Changing Browser Settings a From the Home screen, "Internet" X X "Settings" b Change the settings if necessary General Set home page, tool bar and form auto input.
Apps dmenu This allows you to access easily to docomo's recommended sites or convenient applications. a From the Home screen, "dmenu" • Select a browser and then select "Always" or "Just once". • The browser launches, and dmenu is displayed. Note • Internet via packet communication (LTE/3G/GPRS) or Wi-Fi® is necessary to use dmenu. • Packet communication fees are charged to connect to dmenu or download the recommended applications.
Disney Market With Disney Market, you can download various contents for free such as "Disney アプリ (Disney apps)" or Deco-mails®, or view recommended Disney information. a From the Home screen, "Disney マー ケット (Disney Market)" b Follow the on-screen instructions to operate Note • Contents provided in Disney Market are service provided by The Walt Disney Company (Japan) Ltd. • Subscription to sp-mode is required to use Disney Market. • Packet communication charges are incurred separately.
Play Store Google Play enables you to access applications and games you like and download them to install into this terminal. • To use Google Play, Google account is required (P215). Installing an Application a b From the Home screen, "Play Store" c Tap "INSTALL" (for free applications), or Amount field (for paid applications) Search application X tap the application that you want to download • The displayed content differs depending on the application.
• If you need more information about Google X "Help & Feedback" when Google Play, Play screen is open. Note • Be sure to check the security of application, and then install it at your own risk. This terminal may be infected with a virus and the data may be damaged. • NTT DOCOMO is not liable for malfunctions, if any, caused by the application you installed. In that case, you need to pay for repair even when it is within guarantee period.
Osaifu-Keitai You can use "Osaifu-Keitai compatible service" for payment or coupon by just holding this terminal and against a store reader, or " かざして リンク対応サービス (Kazashite-Link services)" for accessing information by holding it against home electrical appliances, smart poster, etc. Electronic money and point values can be stored on IC cards, or on docomo nano UIM card. Additionally, you can check credit, balance or points of your electronic money, as well as lock Osaifu-Keitai to prevent any loss.
Using "Osaifu-Keitai Compatible Service" Note • You can read/write data with reader without activating Osaifu-Keitai compatible application. • It is available even when you turn off power of this terminal. It may become unavailable if you have not turned on this terminal for a long period of time or the battery level is low. • Osaifu-Keitai compatible services can be used even if the docomo nano UIM card PIN code cannot be unlocked, or if the PIN code is locked.
Notes on Holding over Device Notes when holding over reader, NFC Modules built-in device, etc. • When holding over mark, bring it close to the device slowly. mark parallel to the center of • Hold the reader. If it cannot be scanned even with it held in front of the center scanner, slightly lift up this terminal, or move it backwards/ forwards or to the left/right. • When there is a metal object between the mark and the device, reading may fail.
ToruCa Note • While configuring "NFC/Osaifu-Keitai lock", or are displayed on the status bar. • This cannot be unlocked even if the power is shut off. • If the battery runs down during the configuring of "NFC/Osaifu-Keitai lock", "NFC/Osaifu-Keitai lock" can no longer be unlocked. Be careful of the battery level. Make sure to unlock "NFC/Osaifu-Keitai lock" after charging this terminal. When the power is off, cancel "NFC/OsaifuKeitai lock" after finishing charging.
iD アプリ (iD application) "iD" is electric money provided by docomo. You can enjoy shopping simply and conveniently only by holding Osaifu-Keitai set with "iD" over the IC card reader in stores. Since up to two types of card information can be set, you can use them separately according to the benefits, etc. • To use iD with Osaifu-Keitai, setting iD application is required. • The charges required for iD service (including the annual charge) vary by card issuer.
Before Using Full seg/1Seg Full seg/1Seg is a service provided by TV broadcast companies (broadcast stations). Receiving video and audio is free. For more information about NHK reception fees, contact NHK. There are two types of information displayed in the data broadcasting area: "Data broadcasts" and "Data broadcast sites".
TV Antenna Cable L01 When watching TV (Full seg/1Seg), connect the TV Antenna Cable L01 included in this package with this terminal. a Insert the connection plug of the TV Antenna Cable L01 into the Earphone/microphone jack of this terminal • Insert the plug all the way till the end. You may not be able to hear the click if it is not inserted till the end. • Insert an earphone/microphone plug of 3.5 mm diameter into the earphone/ microphone jack of the TV Antenna Cable L01.
• When both of the earphone/microphone and Bluetooth® device are connected to this terminal, the sound is output from the device that has been connected later. • TV (Full seg/1Seg) is not compatible with the following functions due to copyright protection.
a Program title and broadcast time b Program details Tap it to display the program title, channel, broadcast time and the overview. c Screen lock button Lock the TV watching screen when it is full screen display. And then tap to unlock it. d Speaker ON/OFF button e Menu A menu is displayed. f TV broadcast area • Swipe upward/downward on the right part to change the volume. • Swipe upward/downward on the left part to change screen brightness. • Swipe leftward/rightward to switch channels.
g Channel area • When watching a channel that supports multiservice, tap to select a service. • Tap / to switch channel. • Touch and hold / to search the available channels. h Volume button i Data broadcast button Tap to display the data broadcast area (P148). j Channel list/program list area Tap the channel list/program list switch button to display the channel list/program list. ■ Channel list • Tap a channel to switch it. • Touch and hold a channel to select the its channel services.
Viewing the data broadcast screen Tap data broadcast button on the TV (Full seg/1Seg) watching screen to display the data broadcast screen. a TV broadcast area Tap to display the TV (Full seg/1Seg) watching screen. b Subtitles Display caption when viewing a closecaptioned program. c Scroll bar Swipe or drag up to display the data broadcast in full screen mode. d Data broadcast area Tapping directly on the content of the data broadcast may allow you to operate.
e Data broadcast operation button ■ 1Seg • Adjust the cursor with " ▲ "/" ▼ " and tap "OK" to select an item. The broadcast data of the link displays. • Tap to return to the link. ■ Full seg • Align the cursor with an item via "∧"/"∨"/ "＜"/"＞", and tap "OK" to select an item. The data broadcast of the link will be displayed. • Tap to display Num. To go back to the previous display, tap . • Tap to decrease the data broadcast operation button and display it. To go back to the previous display, tap .
Watching Recorded Programs Recorded programs can be watched and deleted by using the Television box. a From the Home screen, "Apps" X "TV" b c Tap the program being watched X "TV box" Deleting recorded programs 150 a b From the "TV box" screen, tap c "Delete" X "Yes" Place a check mark to the program to be deleted Apps Note • From the "TV box" screen, X place a check mark in "Select all" X "Delete" X "Yes" is tapped, all recorded programs can be deleted.
Reserving Recording/ Watching Choose start time/end time and a channel and reserve a program to record/watch, then follow the settings to start recording/watching. a b c From the Home screen, "Apps" X "TV" X "Reservation list" X set the settings if necessary Reservation type The record and watch presets can be switched. Mode Select a mode to receive data. Available recording time Check the estimate recording time. Channel Select channel. Start Time Set the start date/time.
Confirming/editing reservation contents a From the "Reservation list" screen, tap a viewing reservation • Edit reservation contents and tap "Save". Deleting reservation contents a From the "Reservation list" screen, b Place a check mark in "Select all" or the recording/viewing reservation that you want to delete c "Delete" X "Yes" Using TV Link Some data broadcasts may show link information (TV link) to related sites. By registering a TV link, it is possible to connect to related sites later.
Switching Viewing Area Reservation list Choose a channel and time and reserve a program to record/ watch. TV link The registered TV link list is displayed. Change area Add or change the watching area. Auto-off Set the time to end TV automatically. Subtitles Set on/off for subtitles. • Subtitle display is only available for full screen display or data broadcast screen. Multiple sounds Change sound. From the Home screen, "Apps" X "TV" a b c X "Change area" • When adding new area, .
TV settings 154 Apps Brightness Set screen brightness. • Place a check mark in "Automatic brightness" so that screen brightness changes automatically as the environment changes. Screen size Set screen size. Superimpose Set whether to use Telop or not. The information such as emergency bulletins or news bulletins are displayed together.
Camera This terminal has a built-in camera that can shoot photos and videos. Before Shooting All photos and videos shot on your terminal are saved to the internal storage. Copyrights and portrait rights Avoid copyright infringements when copying or editing photos and videos that have been shot on this terminal. You should also avoid infringing the portrait rights of other people by using or modifying their portraits without their consent.
• Do not expose the lens to direct sunlight for a long period of time and do not point at the sun or a bright light directly. The image may become discolored or the camera may fail to operate properly. • Do not cover the lens with your fingers or hair when shooting. • Shooting a fast moving object may result in an image slightly distorted from the image displayed on the screen at the time of shooting, or the image may be blurred.
a Display/Hide icons Display/Hide the icons (b, c, d, e, h, i) on the camera screen. b Flash on/off/auto switch Set flash switch. • Depending on the shooting mode, flash may not be able to be set. c Switch cameras Switch between the front and main cameras. d Shooting mode (setting) Set to Auto/Panorama/Dual. e Settings Set up Dynamic tone (HDR)/Resolution/ Voice shutter/Self-timer/Grid display/Invert left and right part of an image and save/ Saving location/Gesture view.
l Cancel auto focus button Tap the screen while recording the video to display the button. Tap the displayed button to cancel the auto focus. m Still image button It is displayed during recording the video. Tap it to capture the moment as a still image. n Stop recording button Stop recording the video. o Pause button Stop the recording temporarily.
Shooting a Video a b c d From the Home screen, "Camera" Point the camera at the subject • The recording start sound plays and Camera starts shooting. • When the recording starts, the recording elapsed time will be displayed on the recording screen. • Press the volume key (up)/volume key (down) while recording to take a still image of that moment. • You can zoom in/out by pinching out/in the touch screen during video shooting. • Tap while shooting a video to pause. Tap to start shooting again.
Gallery You can display photos or play back videos stored in the terminal that have been obtained by shooting with the camera or downloading from the Internet. Viewing Photos and Videos 160 a From the Home screen, "Apps" X "Gallery" b Tap an album c Tap one of the thumbnails • Both photos and videos are displayed by thumbnail. • To view photos or videos shot by this terminal, tap "Camera". • In album list, tap to activate camera, then you can take photos or record videos.
- "Move": Move a photo to another album. - "Copy": Copy a photo to another album. - "Copy to Clip Tray": Copy a photo to Clip board. - "Lock"*: Lock a still image. - "Slideshow": Display the saved photos by slide show. - "Rotate left": Rotate a photo to the left. - "Rotate right": Rotate a photo to the right. - "Crop": Trim a photo. - "Add location"/"Remove location": Add or remove location information to a photo.
Copying Music Files and Videos to this Terminal From Media Player, you can play music files and video files of your own after copying them to the internal storage. a Connect this terminal with a PC via the microUSB Cable 01 (optional) (P238) b Set USB PC connection mode to "Media device (MTP)" (P238) c On PC, open "コンピューター (Computer)" and select phone name of this terminal • The driver (Internal storage) in this terminal is displayed.
f Search icon Search contents. g Menu A menu is displayed. h Ringtone shortcut menu button When the music is available to set for ringtone, shortcut menu including ringtone is displayed. i dmarket button Access to d music of dmarket, dTV and d anime store and view TOP, New arrivals, Ranking. a Quick play bar This is displayed when there is music playing/paused. Tap this to display the Music screen. b Tabs Drag or swipe to left or right to display the hidden tabs.
Playing Music Note • From the "Media Player" screen, X "Sort" to switch the list display between ascending and descending order. • From the "Media Player" screen, X "Search" to access to dmenu and purchase songs. • From the "Media Player" screen, when a list of albums/videos is displayed, X "Thumbnail"/"Playlist" to switch the list display format between thumbnail display and list display. • From the "Media Player" screen/Music screen/Video screen, X "Exit" to close the Media Player.
a Return to list Return to the song list. m Play/Pause button b Elapsed time o Fast-forward button Forward a song. c Play progress bar Drag to play a song from a desired point within the song. d Cover flow Tap to display the album information. e Contents information Title/Artist name/Album title are displayed. f Backward button Start playing from the beginning of the current song. Double-tap to start playing from the beginning of the previous song. g Fast-rewind button Rewind a song.
Playing Videos a Miracast settings Set Miracast and output the screens and sounds of this terminal to a TV. a From the Home screen, "Apps" X "Media Player" b "Movie" tab c Tap a video you want to play d Video information Display titles/artist names. • The Video screen appears and the video is played. e Return to list Return to the video list screen. • A list of playable videos saved on the internal storage and the microSD card is displayed.
n Fast-forward button Forward a video. o Button for skipping to next video p Play/Pause button Using Playlists Playlists allow you to play your favorite songs in a desired order. Displaying playlists Note • When "Background-movie settings" is ON, is displayed on the status bar while playing a video on the background. Display the notification panel to operate a video (P70). • Rotate this terminal to change to horizontal screen display while the video playback screen is being displayed.
Creating a playlist a a From the Home screen, "Apps" X "Media Player" b c d "Playlist" tab X "Add" b "Playlist" tab X tap a playlist to edit c "Edit" d After finishing editing, "Save" X "OK" e 168 Editing playlists From the Home screen, "Apps" X "Media Player" Enter a playlist name X "OK" Tap a song you want to add • Tap the "All songs", "Artists", and "Albums" tabs to switch the display list. • Tap "Add all songs" to add all songs in the list.
Deleting/Sorting a playlist Setting Media Player a From the Home screen, "Apps" X "Media Player" a From the Home screen, "Apps" X "Media Player" b "Playlist" tab X "Reorder/Delete" b c Change settings if necessary c • becomes deletable when it turns to red after tapping a playlist. • Tap "Select all playlists" to delete all playlists. • Drag upward and downward to change the playlist/quick playlist order.
170 Backgroundmovie settings Set whether to go back to the Home screen while playing a video, or whether to continue playing as background when changing to another application. Arrange tabs Change the order of the tabs on the "Media Player" screen. Global data communication Set whether to allow data communications when using the device overseas. Update database Update the Media Player database. Reset settings Return the Media Player to its initial settings.
• Since GPS is governed by the United States Department of Defense, the GPS signals might be controlled (degradation of accuracy, signal blackouts, etc.) according to national security reasons of the US. Also even if positioning is done in the same locations and environments, identical results may not be obtained due to the differences in signal conditions caused by the locations of the satellites. • Wireless communication products (mobile phone or data detector etc.
Battery saving (Networks only) Uses Wi-Fi® and mobile networks to identify current location. Device sensors only (GPS only) Uses GPS to identify current location. Note • It may take up to several minutes to determine current locations when the GPS functions are used for the first time. • This terminal is equipped with a GPS receiver that uses satellite signals to calculate current locations. Some GPS service functions use the Internet.
Searching a route Using Maps You can display present location, search another place, or search route by using Google map. • Before getting the current location, set to "Enabling Location Information" (P171). • To use Google map, you need to connect LTE/3G/GPRS network or Wi-Fi®, and set data communication available to use. • Google Maps does not work for all nations or regions.
d Tap one of the routes displayed at the bottom screen • Detailed route is displayed. • Swipe routes at the bottom screen to left or right to show other routes. • For vehicle and walk, tap "START NAVIGATION" to start navigation. Note • Any operation during driving should be performed by a passenger. • If you have logged in Google account, you can choose a starting point or destination from home, work and history.
Alarm with vibration Set if vibrate or not while alarm is ringing. Alarm sound Set alarm sound. Alarm volume Set alarm volume. ADVANCED SETTINGS d Auto app starter Set the application to launch when the alarm is stopped. Puzzle lock Set if to undo a puzzle to stop alarm. Memo Add memos to alarms that are set. Note • The alarm functions at the time set for the alarm. Tap "Dismiss" to stop the alarm. is displayed on the status bar when tapping "Snooze".
Setting Timer a From the Home screen, "Apps" X "Clock" X "Timer" tab b Set Hour/Minute/Second c • X Tap "Settings" to set the following settings. Alarm with vibration Set if vibrate or not while alarm is ringing. Alert sound Set alarm sound. Alert volume Set alarm volume. a From the Home screen, "Apps" X "Clock" X "World clock" tab b c Input a city name in search box X tap a city • City name, current time and date of the selected city are displayed in World clock list screen.
Setting Stopwatch a From the Home screen, "Apps" X "Clock" X "Stopwatch" tab b "Start" • The stopwatch starts. Tap "Lap" to count lap times. • To stop the stopwatch, tap "Stop". • Tap "Resume" to restart the stopwatch, and tap "Reset" to reset it. Calendar This terminal has a calendar for managing your schedule. If you have a Google account, synchronize data with Google calendar.
a Switch QSlide application mode b Icon of today Move cursor to today's date (date of icon is changed). c Icon to create new Create a schedule. d Menu The menu is displayed. e Switch calendar display Change the calender display format to Day/ Week/Month/Year/Agenda, display/hide the Japanese holidays or display the schedules of each account. f Switch display Tap "＜"/"＞" in Day view/Week view/Month view/Year view to display the previous/next day, week, month or year.
Changing/Deleting a Schedule a From the Home screen, "Apps" X "Calendar" b c Tap a schedule to change/delete X (edit)/ (delete) X "Agenda" • Tap to edit contents and then "Save". • Tap and "Yes". • On the Calendar screen, tap X "Delete" X "Select all" or place a check mark in schedules you want to delete X "Delete" X "Yes" to delete. QMemo+ Simply take a memo without activating the memo application. Write characters or draw illustrations directly on a captured screen.
Calculator a a Undo/Redo. b Edit font, or select a color. c Select a pen type and a color. d Use an eraser. e Display/hide the tool bar. f Save the memo you created. g Change the paper style of the created memo, and use an application or service to send it. 180 Apps From the Home screen, "Apps" X "Calculator" • From the Calculator screen, X "Scientific calculator"/"Basic calculator" to change functions. If it is landscape display, both basic calculator and scientific calculator are displayed.
docomo backup Backing up to/Restoring from microSD card You can move and back up phonebook entries, docomo mails, etc. using external media such as microSD card. • Do not remove the battery pack or microSD card from the terminal while backing up or restoring data. Data may be damaged. • When item names in phonebook entry of another terminal (phone number etc.) is different from the terminal, the item names may be changed or deleted.
Restoring Restore data such as phonebook entries, docomo mails, images/videos, etc. to the terminal. a From the Home screen, "Apps" X "docomo backup" X "Backup/restore to microSD" b "Restore" X "Select" type of data to restore X place a check mark in the data to restore X "Select" c Select restoration method X "Start restore" X "Restore" • Selecting restoration method is not necessary for some data types. d Enter docomo apps password X "OK" • Selected data is restored to the terminal.
Restoring Backing up Data Storage BOX Use the data storage BOX to move or back up the call history, music, user dictionary and bookmark. Backing up a From the Home screen, "Apps" X "docomo backup" X "Backup/restore to docomo cloud" b "Restore" X "Select" of data type to be restored X place a check mark in the data to be restored X "Select" a From the Home screen, "Apps" X "docomo backup" X "Backup/restore to docomo cloud" b "Backup" c • If you are not logged in, a confirmation screen appears.
Settings Settings Menu From the Home screen of this terminal, "Apps" X "Settings" to display the "Settings" screen to set different settings. WIRELESS NETWORKS (P184) DEVICE (P198) PERSONAL (P209) SYSTEM 184 Settings (P218) WIRELESS NETWORKS Set to enable/disable networks and set the network connection settings. Wi-Fi (P185) Bluetooth (P230) Mobile data (P191) Call settings (P111) More...
Wi-Fi® This terminal connects to the Internet via access points for Wi-Fi® networks or public wireless LAN services. To connect, you must configure the access point connection settings on this terminal. ■ Reception interference caused by Bluetooth® devices • As wireless LAN (IEEE802.11 b/g/n) and Bluetooth® device use the same frequency (2.4 GHz), reception interference may occur or the communications speed may lower. Also, you may hear noise or have a connection problem.
Connecting to a Wi-Fi® network a Note From the Home screen, "Apps" X "Settings" X "Wi-Fi" • Open network and protected network are two types networks that are available. The network type is indicated by an icon to the network name. represents an open network and represents a protected network. The icon also indicates the signal strength. • When "Wi-Fi tutorial" screen is displayed, tap "Continue" to start a tutorial, or tap "Close tutorial" to display "Wi-Fi" screen.
• When "Switch to mobile data" has a check mark, if the mobile network icon is displayed on the status bar, it indicates that the mobile network is being used and note that the packet communication fee will occur. When the popup screen of switching mobile data is displayed, select "Don't show this again" and tap "OK" so that the popup screen is not displayed anymore.
Setting mobile data switch Set whether to check availability of the connected Wi-Fi® network and change to the mobile network automatically if it is unavailable.
Confirming/Deleting the saved Wi-Fi® network a From the Home screen, "Apps" X "Settings" X "Wi-Fi" b c Turn on "Wi-Fi" d Tap a Wi-Fi® network name e "Forget" X "Saved Wi-Fi" ® • The Wi-Fi network list that was connected to is displayed. Using Wi-Fi Direct® Devices support Wi-Fi Direct® are connected without using access point.
Setting advanced Wi-Fi® settings a From the Home screen, "Apps" X "Settings" X "Wi-Fi" b c d Turn on "Wi-Fi" Passpoint CONNECTION X "Advanced Wi-Fi" Change the settings in necessary NOTIFICATIONS Wi-Fi notification*1 190 Allow Wi-Fi scanning When Wi-Fi® is OFF, set to allow the Google position information service and other applications scanning the networks or not. Settings (P189) Connect by WPS button*1 Connect to WPS (WiFi® Protected Setup) supported access point.
Setting mobile data Mobile Data Items such as whether or not use mobile data communication, limit mobile data usage, data usage cycle and the services being used are displayed. Displaying mobile data screen Mobile data usage (rough number) is displayed either term by term or application by application. a From the Home screen, "Apps" X "Settings" X "Mobile data" Note • When "Mobile data" is set to ON, Internet access via mobile network is enabled.
More... Miracast Set to share screen display and sound on video equipment that supports Miracast via Wi-Fi Direct®. When available devices are not found, tap "Search for devices". SmartShare Beam (P240) Media server Use DLNA to share the peripheral device and media contents. NFC/Osaifu-Keitai settings (P195) VPN (P196) Mobile networks Set if enable data communication and if enable data roaming. Also set access point names, network mode and network operators. Set other network settings.
Using Tethering Tethering is a function which uses a mobile device such as a smart phone as a modem to connect wireless LAN devices, USB compatible devices and Bluetooth® compatible devices to Internet. Enabling USB tethering Use microUSB Cable 01 (optional) to connect this terminal and a PC to access to the Internet by using this terminal as a modem. a Use a microUSB cable to connect this terminal and a PC (P238) b From the Home screen, "Apps" X "Settings" X "More...
Enabling Wi-Fi® tethering Up to eight wireless LAN compatible devices can access to the Internet simultaneously by using this terminal as a Wi-Fi® access point. a From the Home screen, "Apps" X "Settings" X "More..." X "Tethering" b "Wi-Fi tethering" Note • Wi-Fi® tethering can be used together with USB tethering and Bluetooth® tethering. Setting Wi-Fi® tethering ■ Setting Wi-Fi® access point a From the Home screen, "Apps" X "Settings" X "More...
Enabling Bluetooth® tethering Up to five Bluetooth® devices can access to the Internet simultaneously by using this terminal as a modem. a From the Home screen, "Apps" X "Settings" X "More..." X "Tethering" b "Bluetooth tethering" Setting NFC/Osaifu-Keitai Set and manage NFC/Osaifu-Keitai settings. a From the Home screen, "Apps" X "Settings" X "More..." X "NFC/ Osaifu-Keitai settings" NFC/OsaifuKeitai lock Restrict Osaifu-Keitai functions and its usage services.
Connecting to VPN (Virtual Private Network) VPN (Virtual Private Network) is a technique to access to the information protected in local network from other networks. VPN is generally equipped in companies, schools or other facilities. Users can access the local network and view information outside the premise. To set VPN access from this terminal, security information from network administrator is required. Adding VPN a From the Home screen, "Apps" X "Settings" X "More...
Always use VPN From the Home screen, "Apps" X "Settings" X "More..." X "VPN" a b c X "Always-on VPS" Select a VPN profile X "OK" Setting Access Point Access point for connecting the Internet (spmode) is already registered. You can add or change it if necessary. For details about sp-mode, refer to DOCOMO website. When using mopera U or Business mopera Internet, add access point manually. For details on mopera U, refer to mopera U website.
Initializing access point When initializing an access point, it returns to the default settings. a b From the Home screen, "Apps" X "Settings" X "More..." X "Mobile networks" X "Access Point Names" X "Reset to default" X "Yes" DEVICE Sound Set sound settings such as phone ringtone, volumes and vibrate. BASIC Manner Mode Select from "Sound & Vibrate", "Vibrate only" or "Do not disturb".
NOTIFICATIONS Do not disturb Set whether to ring when there is an important notification such as an incoming call, a new message. • The alarm always rings. Lock screen Set whether to display contents (contents of a received mail, etc.) or notifications when the screen is locked. Apps Allow/block the notifications from each application. Voice notifications Set whether to read out the sender's information and the message contents of a received message (SMS) automatically.
Display FONT Set display settings such as screen brightness or animations. SCREEN Brightness 200 Set screen brightness. • If you place a check mark in "Automatic brightness", the screen brightness changes automatically according to the environment. Screen timeout Set time duration before screen turns off automatically. Screenoff effect Set effect when turning off screen. Auto-rotate screen Set to switch the screen to horizontal/portrait according to the orientation of this terminal.
Home Screen Set the Home screen settings. • You cannot change items except for "Select Home" and "Wallpaper" on docomo LIVE UX. Select Home Switch home applications. Choose "docomo LIVE UX" or "Home" (P87). SCREEN Wallpaper Set a wallpaper. Screen swipe effect Select a screen effect. Allow Home screen looping Set to go to the initial screen or not when scrolling the Home screen. DATA Home backup & restore Back up or restore the layout and wallpaper of the applications.
Individual settings a From the Home screen, "Apps" X "Settings" X "Disney character settings" b Tap a Disney character X swipe the screen to left/right to display the items to be changed X " 個別設定 (Individual settings)" X "OK" • The settings of the selected items are changed. 202 Settings Lock Screen Set to lock screen or not. Set settings if necessary.
Select screen lock Password Smart Lock Enter a password to unlock screen. Follow the on-screen instructions to enter a 4 to 16-digit password including alphabets. Set to unlock the touch screen automatically by a trusted terminal, location or face that you have set up. Randomize PIN entry Set whether the number layout on keyboard is random when inputting PIN. Hidden password Set whether to display the password input area when tapping the screen.
LOCK TIME Lock timer Set time duration from the screen turns off till it is locked. Power button instantly locks Set to lock the screen immediately or not after pressing the power key. Note 〈On-Screen Unlock〉 • If you entered an incorrect screen-unlock patterns for five times, a message is displayed to remind you to re-input the pattern after 30 seconds.
Gestures Enable or disable each gesture. ANSWER ME Silence incoming calls When this terminal is ringing or vibrating, flip the terminal over to make the display face downwards to stop ringtone or vibration. SENSOR Motion sensor calibration Calibrate the accuracy of sensor (the tilt and speed of the sensor). • Operate it when Gesture does not work properly. * Operate only when the Home selection is "Home".
Storage Battery Display free space in internal storage and microSD card, operate mount and format. Confirm the remaining battery, set to restrict the usage of each function when the battery is getting less. INTERNAL STORAGE Total space Total space of the internal storage is displayed. Available Available space of the internal storage is displayed. Apps, Audio etc. Used space of the internal storage is displayed.
Turn on battery saver When the remaining battery is less than the set value, etc. set the battery saver to restrict the battery consumption by reducing the screen brightness, etc. • Confirm the description related to battery saver in Help. a From the Home screen, "Apps" X "Settings" X "Battery" X "Battery saver" b c Turn on "Battery saver" "Immediately"/"5% battery"/"15% battery" Apps Manage or delete the installed applications.
Deleting an application • Some preinstalled applications may not be able to be deleted (uninstalled). Part of the applications can be disabled (P208). • It is recommended that the applications purchased from Play Store be delete (P137) from Google Play screen. a From the Home screen, "Apps" X "Settings" X "Apps" X "ALL" tab b c Tap an application to delete "Uninstall" X "OK" Disabling an application Disabled application stops its operation and it is not displayed on the Apps screen.
Enable an application again From the Home screen, "Apps" X "Settings" X "Apps" X "DISABLED" tab a b Tap the application you want to enable again c "Enable" Default Message App Select a message application which is used normally from "messaging" and "Hangouts". a From the Home screen, "Apps" X "Settings" X "Default message app" b "Messaging"/"Hangouts" PERSONAL docomo service/cloud Set the docomo services/cloud. docomo ID 設 定 (docomo ID setting) Set docomo ID for using in docomo apps.
Remote Initialization Service Set for using the service by remote operations such as initializing all data etc. in the terminal. Profile setting Confirm/change the customer's profile information which is being used in each of the docomo service. Switch USB debugging Make settings for using dedicated devices such as those for docomo Shops. Open source licenses Open source licenses are displayed. Note • There are some applications can be disabled in the applications displayed in docomo service/cloud.
Security PASSWORDS Set password settings. Content lock Select a lock type when locking a file in gallery. ENCRYPTION Encrypt phone Encrypt the system data saved in the internal storage. After that, PIN or password is required every time when the power is turned on to decode. • To cancel the encryption, from the Home screen "Apps" X "Settings" X "Security" X "Encrypt phone" and follow the on-screen instructions. • Reset this terminal to the state after the purchase to cancel the encryption (P217).
Clear credentials Delete credential information of all contents and VPN in credential storage. • To delete an installed certificate, you need to delete credential storage. ADVANCED SETTINGS 212 Trust agents Set whether to execute the selected operation when a trusted terminal is connected. Screen pin Set whether to fix a certain application on the screen of this terminal or not. App usage access Set whether to access to a certain application or not.
• The PUK code is written on the subscription form (copy for customer) handed at the subscription in the docomo Shop. If you have subscribed at other than docomo Shop, you should bring your official identification (such as driver's license), the docomo nano UIM card with you to the nearest docomo Shop or contact "docomo Information Center" on the last page of this manual. ■ PIN/password for screen lock The security code is used for lock function of the terminal.
■ PIN unblocking key (PUK) The PIN unblocking key is an 8-digit number used to unblock the PIN code. You cannot change it by yourself. • If you enter the PIN unblocking key incorrectly ten times in a row, the docomo nano UIM card will be locked. If this happens, please contact a docomo Shop. Setting PIN code You can set to require the PIN code entry for using the terminal when the power is turned on.
Entering PIN Follow the operations below if you are asked to enter the PIN when turning on this terminal. a Enter the PIN of the docomo nano UIM card, and tap "OK" Unlocking PIN Follow the operations below to unlock PIN when you have entered PIN incorrectly for 3 times in a row.
Removing account a From the Home screen, "Apps" X "Settings" X "Accounts & sync" b c d Tap an account type to delete Tap the account name to delete X "Remove account" X "OK" Note • docomo account cannot be added or deleted. Language & input Set language and keyboard settings in this terminal. You can also set voice input and output settings. Language Select a language you use in this terminal. KEYBOARD & INPUT METHODS Default Select default keyboard and input method.
Initializing this terminal MOUSE/TRACKPAD Pointer speed Set pointer speed when this terminal is connected a with mouse or a trackpad. Backup & reset Initialize settings. BACKUP & RESTORE Backup my data Set to backup on the Google server or not. Backup account Set an account for backup. Add an account to use as a backup in "Add account". Automatic restore Restore the backed up settings and data when installing an application again.
SYSTEM Set shortcut keys, date and time, accessibility, mickey window cover, print and terminal information. Shortcut Key Set whether to quickly access to QMemo+ or camera when the screen is turned off or when pressing and holding the volume key on the lock screen. Date & time Set settings about date and time. 218 Auto-date & time Set the automatic retrieval of date and time information via the network. Auto-time zone Set the automatic retrieval of time zone information via the network.
Accessibility Set application settings related to accessibility. Voice notifications Set whether to read out the sender's information and the message contents of a received message (SMS) automatically. • Set preferred engine, adjust speech rate and listen to an example demonstration in "Voice notifications language". Screen shade Set the brightness to the minimum to save battery. Accessibility shortcut Set whether to enable the start of accessibility function from each of the screens.
Notification LED Set to turning on the LED light during an incoming call or a notification. Flash alerts Set the camera flash to blink during an incoming call or a notification. Turn off all sounds Set whether to turn off all the sounds. Captions Customize the subtitle settings for hard-of-hearing people. PHYSICAL AND MOTOR 220 Touch feedback time Select a touch response sensitivity from "Short", "Medium" and "Long".
Accessibility settings shortcut Triple-tap the home key to toggle "TalkBack", "Invert colors" and "Touch assistant". You can also jump to "Accessibility settings". When you choose "Show all", you can select functions to set at any time. SERVICES Switch Access The operations when the back key, or home key, etc. is pressed set whether controlling is to be substituted by physical key combinations such as the power key, etc.
Mickey Window Cover Set up the Mickey Window Cover L01 which is in the package. 222 Select apps Select applications used on the Mickey Window Cover L01. Preview emails & messages When a mail (docomo mail / Email) or a message is received, set whether to display the notification on the mickey window cover screen. • When the screen lock is set to "Knock Code"/"Pattern"/ "PIN"/"Password", the check mark will be canceled automatically.
About Phone Hardware info Model number (model name), up time, WiFi® MAC address and Bluetooth® address are displayed. Software info Android version, baseband version, kernel version, build number and software version being used in this terminal are displayed. Legal info Legal documents for LG software, open source license, Google legal are displayed. Information related to this terminal is displayed. Phone name Set phone name for Bluetooth®, Wi-Fi Direct®, etc.
File Management Storage Structure This Terminal (Internal Storage) Main created folders in the phone (internal storage) at the time of purchase are as follows. • Depending on operations on the terminal, displayed folders may differ. 224 Alarms Save music data etc. for alarm sound. Android Save setting data or temporary files for the system or applications. DCIM Save still image/video data shot by the camera (when the saving location is set to the terminal).
microSD card (External Storage) You can attach microSD card (including microSDHC card and microSDXC card) to the terminal and use it. • This terminal supports a microSD card of up to 2 GB, a microSDHC card of up to 32 GB, and a microSDXC card of up to 128 GB (as of May 2015). • A microSDXC card can only be used with SDXC compatible devices. Do not insert a microSDXC card into a device incompatible with SDXC since it may cause damage to the data stored in the microSDXC card.
Removing microSD card When removing the microSD card, make sure to unlock the SD card mount (safely remove) before removing it (P206). a b c 226 Detach the back cover (P36) Remove the battery pack (P47) Pull microSD card straight out in direction of arrow mark File Management Formatting microSD card Note that formatting microSD card erases all data in the microSD card.
Cloud storage File Operations File or Folder Operations Use "File Manager" to display or manage the data, such as the still images, videos, music or documents, which were saved in this terminal or in cloud storage. a From the Home screen, "Apps" X "File Manager" b "Dropbox" • To use Dropbox, you need to have a Dropbox account. Follow the on-screen instructions.
Renaming a file or folder 228 Deleting a file or folder a From the Home screen, "Apps" X "File Manager" a From the Home screen, "Apps" X "File Manager" b "All files"/"Music"/"Image"/"Video"/ "Document" X tap a folder if necessary b "All files"/"Music"/"Image"/"Video"/ "Document" X tap a folder if necessary c Touch and hold a folder/file X "Rename" X Enter a name X "Save" c Touch and hold a folder/file X "Delete" X "Yes" Note Note • When purchasing, some folders such as "Android" or "DCIM" which w
Moving/Copying a file or folder Searching Data a From the Home screen, "Apps" X "File Manager" a From the Home screen, "Apps" X "File Manager" b "All files" X tap the folder if necessary b "All files"/"Music"/"Image"/"Video"/ "Document" c Touch and hold a folder/file X "Move"/"Copy" c X enter keyword(s) you want to search d Display the moving destination/copy destination folder X "OK" Note • When purchasing, some folders such as "Android" or "DCIM" which were created in this main unit (internal s
Data Communication Bluetooth® Communication Connect this terminal to Bluetooth® devices wirelessly, to exchange data. • For Bluetooth® compatible version or profile, refer to "Main Specifications" (P274). • For Bluetooth® setting and operation procedure, refer to the manual of the Bluetooth® devices being connected. • We do not guarantee that this terminal can be connected to all Bluetooth® devices wirelessly.
• Wireless connection is available when Bluetooth® device is put in a bag or pocket. However, lowering of communication speed or noise may result when you are in between the Bluetooth® device and this terminal. • The radio wave from Bluetooth® may affect the operation of medical electronics etc. Bluetooth® communication in some cases may result in an accident, so turn off this terminal and other Bluetooth® devices in the following places.
Turning ON Bluetooth® Function to Make this Terminal Discoverable a From the Home screen, "Apps" X "Settings" X "Bluetooth" b Turn on "Bluetooth" Note • When you do not use Bluetooth® function, turn it off to save the battery. • The setting of the Bluetooth® ON/OFF is not changed even when the power is turned off.
When answering pairing request from another device Note • Even for devices requiring pass code (PIN) when pairing, once pairing is performed, it is not necessary to enter the pass code (PIN) to reconnect after disconnected as long as the paring is not canceled. • You can set pairing even if it is a device unable to connect such as an incompatible profile. However, it cannot be connected even if you tap the device.
Receiving data via Bluetooth® function Sending/Receiving Data via Bluetooth® Function • Turn on Bluetooth® function beforehand to make this terminal detectable. Sending data via Bluetooth® function You can send data of phonebook (name card data in vcf format), files such as photos or videos, etc. to another Bluetooth® device (PC etc.). • For sending, perform the operation from the menu such as "Share"/"Send" of each application.
NFC Communication NFC is short for Near Field Communication. It is an international standard proximity wireless communication system determined by ISO (International Organization for Standardization). This terminal enables noncontact IC card function, Reader/writer function, P2P function, etc. Use NFC function to transfer data with other compatible devices. • For holding over the other device, see P140. Android Beam You can transmit and receive data with a device equipped with Reader/Writer, P2P functions.
Transmitting data Transmit files of browser webpages, contacts, images and video to other NFC compatible terminals.
External Device Connection Connecting with a PC You can synchronize data, such as music, with "Windows Media Player" on your PC by connecting this terminal with your PC via the microUSB Cable 01 (optional), and drag and drop the data to transfer it between the PC and this terminal. • To recognize this terminal on your PC, a dedicated driver and Windows Media Player 11 or later are required. - For details about how to download and operate the dedicated driver, refer to the homepage below. http://www.lg.
Connecting this Terminal with a PC a Using as Media Device Insert the microUSB plug of microUSB Cable 01 (optional) in the microUSB connection terminal of this terminal Connect this terminal and a PC with microUSB Cable 01 (optional). This terminal is recognized as a media device (MTP) and you can transfer media files such as images, music or videos. • Insert the microUSB plug horizontally with USB mark facing up.
Using as Camera Device Connect this terminal and a PC with microUSB cable 01 (optional) and turn to Send images (PTP) mode. You can transfer still images and videos to the PC. • Use the Send images (PTP) mode to transfer the data to the PCs which do not support MTP.
Connecting with Other Devices Timeout When SmartShare Beam is not being used, set the time duration before it turns off automatically. Using SmartShare Beam File transfer history Display the list of all the files which were sent/ received by SmartShare Beam. Help Display Help. Use SmartShare Beam to send or receive contents. Setting SmartShare Beam Set to publish the contents on this terminal on other client devices. 240 a From the Home screen, "Apps" X "Settings" X "More...
Sending files to client device via SmartShare Beam You can send contents in this terminal to other client devices. Example: Sending pictures from Gallery a From the Home screen, "Apps" X "Gallery" b c d Select a picture you want to send X "SmartShare Beam" Tap a device to send the picture • When it is sent by Wi-Fi Direct®, turn on the SmartShare Beam on the client receiving device in advance. • When it is sent by Bluetooth®, pair with the client receiving device in advance.
Connecting with TV You can connect this terminal with a TV to display videos and pictures. • To connect this terminal with a TV, use a commercially available SlimPort supported cable or SlimPort supported accessory. • HDMI terminal, HDTV terminal, VGA terminal or DisplayPort terminal is necessary on the TV being connected with. • Depending on TV, the required SlimPort supported cable or SlimPort supported accessory may differ.
Displaying on Wi-Fi® Miracast Supported Device via Wi-Fi® Connection Connect this terminal and a Wi-Fi® Miracast supported device via Wi-Fi® connection to show videos and pictures on TV or on a display. • Turn on Wi-Fi® function beforehand. a From the Home screen, "Apps" X "Settings" X "More..." X "Miracast" b Turn on "Miracast" c Tap a Wi-Fi® Miracast supported device • Tap "Search for devices" if the Wi-Fi® Miracast supported device you want to connect is not displayed.
Using Overseas Overview of International Roaming (WORLD WING) The international roaming service (WORLD WING) allows you to use your terminal in the service areas of overseas operators affiliated with DOCOMO, with the same phone number and email address. Calls and SMS can be used without changing settings. ● Available network This terminal is placed in class 5. You can use it in LTE network, 3G network and GSM/ GPRS network service areas.
Available Service Overseas Before Using Overseas Confirming before Departure Main communication service 3G 3G850 GSM (GPRS) LTE Calls ○ ○ ○ ×*2 SMS ○ ○ ○ ○ Email*1 ○ ○ ○ ○ Browser*1 ○ ○ ○ ○ （○ : Available ×: Unavailable） *1 *2 To use data communication when roaming, turn ON the data roaming settings (P246). Calls via 3G. Note • Some services are not available depending on the overseas network operator or network.
Pre-configuring ● Network service configuration If you have subscribed Network service, voice mail service, call forwarding service, number notification service, etc. are available overseas. However, some network services are unavailable. • Starting "Remote operation settings" service is required when using networks service overseas. You also can set "Remote operation settings" after arriving abroad.
Setting network mode a From the Home screen, "Apps", X "Settings" X "More…" X "Mobile networks" X "Preferred network type" b "LTE/3G/GSM(Auto)"/"LTE/3G"/ "3G/GSM"/"3G"/"GSM" About date & time If you place a check mark in "Auto-date & time" and "Auto-time zone" in "Date & time", the time and time zone of this terminal's clock will be automatically changed when information about the local time and time zone is received from the network of the overseas operator to which you are connected.
How to Make and Receive Calls at Your Location c • The country name set in "Country code" of "International dial assist" is displayed in the above . For example, in case of "Japan" (+81), "Call to Japan" is displayed. Making Calls to Other Countries (including Japan) You can use the international roaming service to make calls to other countries while overseas. • For information of available countries or network operators, see NTT DOCOMO's website.
Making a Call Domestically You can make a call to the other party's landline phone or a mobile phone in the same way as in Japan. a From the Home screen, "Phone" X "Dial" tab b Enter the other party's phone number • To make a call to a land-line phone, enter the area code and the other party's phone number.
Receiving Calls Overseas You can receive calls in the same way as in Japan. Note • When you receive a call while using the international roaming service, the call is forwarded internationally from Japan, regardless of the country from which the call is made. The call is charged the same as the call to Japan, and the receiver is charged the incoming call charge.
Setting International Roaming International Automatic dial assist conversion function Setup to use the international roaming service or international phone calls. • Depending on the overseas network operator, roaming cannot be setup in some cases. a From the Home screen, "Phone" X X "Call settings" X "Roaming settings" b Change the settings if necessary Restricting incoming calls During the international roaming, set to restrict the incoming calls or not.
Network service Remote operation (charged) Caller ID notification request service (charged) Roaming call notification (charged) Roaming guidance (charged) Voice mail (charged) Call forwarding (charged) 252 Using Overseas Set network services such as voicemail from overseas. • Activate "Remote operation settings" beforehand. • For operations from overseas, international call fee to Japan in the country you use is charged. • Depending on overseas network operators, you cannot make the settings.
Appendix/Index Troubleshooting (FAQs) Troubleshooting • First, check whether software update is required. If so, update the software (Software Update → P268). • If it does not improve after confirming the check items, contact "Repairs" (in Japanese only) on the back cover of this manual or a repair counter specified by DOCOMO.
■ Terminal operations Symptom 254 Check item Becomes hot during operation or charging • While operating or charging, or if you operate applications or watch TV for a long time while charging, the terminal, battery pack or adapter may become hot. There is no operation problems and you can continue to use it. Battery life is short • This terminal, internal battery or adapter may become hot during operations or charging, or when shooting videos or using 1Seg for a long time while charging.
Symptom Check item Slow reaction when tapping the touch screen or pressing the keys • It might occur if a large amount of data is saved in terminal or data with extremely large size are processed between this terminal and microSD card. The docomo nano UIM card is not recognized • Is the docomo nano UIM card inserted in the right direction? → P45 Clock is wrong • Clock may become wrong if the power has been turned on for a long time.
Symptom Terminal operation is unstable Application does not work properly (cannot be activated or an error occurs) 256 Check item * When Safe mode starts, "Safe mode" appears on the bottom left of the screen. * To stop Safe mode, turn the power OFF once and restart it. - Before starting Safe mode, backup necessary data. - Widgets that you have created may be gone. - Safe mode is not the normal starting condition, so stop Safe mode before normal usage.
Symptom Check item Calls are not connected ( does not disappear when you move, or calls cannot be made or received even when the radio wave is strong enough) • Turn the power off and on, or remove and attach the battery pack or docomo nano UIM card. • Due to the radio wave types, making/receiving calls may be unavailable even with state of "in the service area" and even when radio wave is indicated as . Move to the other place and call again.
■ Mail ■ TV (Full seg/1Seg) Symptom Check item Symptom Email is not received automatically • Is there a check mark in "Email" of "Account & sync"? Place a check mark in it. → P126 • Do you set "Update schedule" to "Manual"? Set Sync schedule.
■ Osaifu-Keitai ■ Overseas use Symptom Check item Symptom Osaifu-Keitai cannot be used • If you remove the battery pack or activate Omakase Lock, Osaifu-Keitai function cannot be used regardless of NFC/Osaifu-Keitai lock settings. • Is NFC/Osaifu-Keitai set to lock? → P140 • Did you swipe the mark of this terminal over the reader? → P140 This terminal is not available to use overseas Check item ■ Antenna mark appears • Have you applied for WORLD WING? Check whether you have applied for WORLD WING.
Symptom 260 Check item Data communication is not available overseas • Set Data roaming to ON. → P246 This terminal has become unusable suddenly while using overseas • Has the approximate limit of usage fee been exceeded? For "International roaming service (WORLD WING)", the approximate limit of usage fee is set in advance. If the limit is exceeded, pay off the usage fee to resume services.
■ Data management ■ Bluetooth® function Symptom Check item Symptom Data transfer is not working • Are you using a USB HUB? If you use a USB HUB, data transfer may not work properly. The data saved on a microSD card is not displayed • Remove and attach microSD card.
■ Map and GPS Function Symptom AUTO-GPS service information cannot be set. 262 Error Message Check item • Check if the AUTO-GPS function is deactivated due to low battery power. • Check if the AUTO-GPS function is deactivated due to low battery power. If the AUTO-GPS function is deactivated by the "Lowpower operation settings", the AUTO-GPS service information cannot be set. In that case, change the "Low-power operation settings" to "Not suspend" or charge the battery to set it.
Error Message Description • Not enough space on all storage. To free up space, delete some files. • If you keep using, some functions and applications may not be operated. Try to free space by deleting items, such as apps or media content. It is displayed when there is not enough space to save a file, application or media contents, or to operation part function or application. You can delete files or media contents or uninstall applications to ensure the enough space.
264 Error Message Description Login information incorrect. Try again When setting up Email account, an incorrect Email address or password has been input. Input the correct Email address or password. Network unavailable When setting up Email account, it cannot access to the server due to the abnormality of the network. Confirm the network state. Optimizing app XX of XX . This may take longer depending on apps. Please do not remove the battery until complete.
b From the Home screen, "Apps" X " 遠 隔サポート (Remote support)" • For the fist time of using this support, you are required to accept the "アプリ ケーション・プライバシーポリシー (application privacy policy)". c " 遠隔サポートの接続画面に進む (move to remote support connection screen)" X " 同意する (agree)" d Input the connecting number that is announced by DOCOMO e Start remote support after connecting Warranty and AfterSales Service Warranty • Be sure to receive a warranty at the time of purchase of this terminal.
* Phonebook data can be saved on microSD card in this terminal. * Data such as phonebook entries can be backed up using docomo cloud. After-Sales Service When this terminal breaks down Before repair, read "Troubleshooting" in this manual for detailed information. If the problem still persists, contact "Repairs" (in Japanese only) on the back of this manual. Repairs Bring your terminal to a repair counter specified by DOCOMO. Repairs are accepted during business hours of a repair counter.
■ Replacement parts Replacement parts (parts required to maintain functions) will in principle be kept in stock for 4 years after termination of production. However, depending on the malfunctioning part, repair may not be possible due to a lack of replacement parts. Even after the stock period has expired, the repair of some malfunctioning parts may be possible. Therefore contact "Repairs" (in Japanese only) on the back of this manual. Precautions • Never modify this terminal or accessories.
Memory dial (Phonebook function) and downloaded data When you change the model or repair this terminal, data that has been imported, downloaded or created by you may be changed or lost. DOCOMO shall have no liability for any change or loss of any kind. Under some circumstances, DOCOMO may replace your terminal with its equivalent instead of repairing it. In this case, most data from the old terminal cannot be transferred to the replacement terminal.
Note • The update can be run with the data saved in this terminal. However, the data may not be protected depending on your terminal conditions (malfunction, damage, getting wet, etc.). It is recommended to back up necessary data beforehand. Please note that some data cannot be backed up. Precautions • Once updating your terminal, you cannot downgrade to any former software. • When updating, the original information about this terminal (type, built number, etc.) will be sent to our server automatically.
• Exit all applications before updating. • Make sure to upgrade with battery fully remained. • Do not power off or remove the battery pack during update. • It is recommended that this terminal be put in a place with good reception and not be moved while downloading. The update may stop when it is put in a place with bad reception. • When the download via Wi-Fi® starts, finish the download without moving it out of the Wi-Fi® environment.
Changing installation reservation time When the icon is not displayed on status bar You can change the reserved time yourself. Follow the procedures below to update.
b Select "Download and install" or "Download" • "Download and install": After the download is finished, the installation is implemented automatically. • "Download": Even after the update file has been downloaded, the installation is not implemented automatically. To install, you need to implement the installation yourself. Note • When the software in this terminal is the latest one, "No upgrade is needed. Use it as it is." appears.
Setting Updates Application Update Configures settings for download of applications, update notification cycles, and automatic updates provided by LG Electronics Inc. Application can be updated via LTE/3G connections or via Wi-Fi® connections. • For precautions on application update, refer to "Precautions" (P269) of software update. • For the latest software information, refer to LG Electronics website. http://www.lg.
Main Specifications Charging time Terminal Model name DS1604 Size (H×W×D) Approx. 144 mm× Approx. 74 mm× Approx. 9.6 mm (Max. thickness: Approx. 10.8 mm) Weight Approx. 149 g Memory ROM 16 GB*1 RAM 2 GB LTE Continuous standby time Continuous call time 274 Stationary (Automatic): Approx. 550 hours GSM Stationary (Automatic): Approx. 400 hours FOMA/3G Approx. 950 minutes GSM Approx. 770 minutes VoLTE voice call Approx. 990 minutes Appendix/Index Approx.
Type CMOS with flash on the back side Size Main camera: 1/3.0 inch Front camera: 1/6.9 inch Effective pixels Main camera: Approx. 13.2 million pixels Front camera: Approx. 2.4 million pixels Recorded pixels (maximum) Main camera: Approx. 13.1 million pixels Front camera: Approx. 2.4 million pixels Image pickup device Zoom (Digital) Up to approx. 8.0x (90 levels) (main camera only) Wireless LAN IEEE802.11 a/b/g/n standard (IEEE802.11n frequency band: 2.
*4 *5 This varies depending on the obstacles between the communicating devices and the reception quality. These are Bluetooth® standards that provide specifications for communications between Bluetooth® compatible device. • Continuous call time is an estimate of the battery life during a continuous call with normal signal reception. • Continuous standby time is an estimate of the battery life during a continuous standby with normal signal reception.
Languages compatible ■ Display languages Japanese/English * Azerbaijani/Indonesian/Malay/Bosnian/ Catalan/Czech/Danish/German/Estonian/ Spanish/Basque/French/Arabic/Croatian/ Icelandic/Italian/Swahili/Kurdish/Latvian/ Lithuanian/Hungarian/Dutch/Norwegian/ Uzbek/Polish/Portuguese/Romanian/ Slovak/Slovenian/Finnish/Swedish/ Vietnamese/Turkish/Greek/Bulgarian/ Kazakh/Serbian/Ukrainian/Georgian/ Armenian/Farsi/Nepalese/Marathi/Hindi/ Bengali/Punjabi/Gujarati/Tamil/Telugu/ Kannada/Malayalam/Sinhalese/Thai/ Burme
Estimate number of photos and video ■ Number of shooting photos (estimate) Resolution 3120×3120 （9M） DS1604 (main unit)* Approx.1,900 microSD card (1GB) Max. approx. 250 The number of images when the file size is 4 MB. * The number of saved images at the time of purchase. ■ Video recording time (estimate) Resolution 1920×1080 （FHD） DS1604 (main unit)* Max. approx. 28 minutes (per video) Max. approx. 54 minutes (total) microSD card (1GB) Max. approx.
Radio Frequency (RF) Signals THIS MODEL PHONE MEETS THE U.S. GOVERNMENT'S REQUIREMENTS FOR EXPOSURE TO RADIO WAVES. Your wireless phone contains a radio transmitter and receiver. Your phone is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population.
The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Grant section at http://transition.fcc.gov/oet/ ea/fccid/ after search on FCC ID ZNFDM02H. For body worn operation, this phone has been tested and meets the FCC RF exposure guidelines.
FCC Statement for the USA This device complies with part15 of FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. Part 15.21 statement Change or Modifications that are not expressly approved by the manufacturer could void the user's authority to operate the equipment. Part 15.
European Union Directives Conformance Statement Hereby, LG Electronics Inc. declares that this product is in compliance with: • The essential requirements and other relevant provisions of Directive 1999/5/EC • All other relevant EU Directives The above gives an example of a typical Product Approval Number. Wi-Fi® (WLAN) 284 This device is intended for sale in Japan only. This equipment may be operated in all European countries. The 5150 - 5350 Mhz band is restricted to indoor use only.
PETROL STATIONS Obey all posted signs with respect to the use of wireless devices or other radio equipment in locations with flammable material and chemicals. Switch off your wireless device whenever you are instructed to do so by authorized staff. INTERFERENCE Care must be taken when using the phone in close proximity to personal medical devices, such as pacemakers and hearing aids.
Export Administration Regulations Japan Export Control Regulations ("Foreign Exchange and Foreign Trade Law" and relevant laws and regulations) may apply to this product and its accessories. U.S. Re-export Regulations (Export Administration Regulations) applies to this product and its accessories. If you export or re-export this product or its accessories, please follow the necessary procedures at your own risk and expense.
Trademarks • "FOMA", "i-mode", "i- α ppli", "sp-mode", "Decomail", "WORLD CALL", "WORLD WING", "mopera U", "ToruCa", "iD" and "ToruCa" logo are the trademarks or registered trademarks of NTT DOCOMO, INC. • "Catch Phone (Call waiting service)" is a registered trademark of Nippon Telegraph and Telephone Corporation. • The microSD Logo, microSDHC Logo, and microSDXC Logos are the trademarks of SD3C, LLC. • The Bluetooth word mark and logos are owned by the Bluetooth SIG, INC.
• Disney elements: © Disney The terminal, accessories and the packages may contain designs, contents and other works that Walt Disney Company (Japan) Ltd., its parent or their affiliates (collectively, "Disney") own, co-own or license copyright and other intellectual property rights. Please read the applicable Terms of Use before use. "Disney Mobile" is the registered trademark of Disney. • This terminal contains NetFront Browser,NetFront Document Viewer and NetFront Sync Client of ACCESS CO., LTD.
Open Source Software Notice Information To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this product, please visit http://opensource.lge.com . In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download.
Using mobile phones with your manners! Please be considerate of others around you when using this terminal. Always turn OFF your terminal in the following situations ■ In a place where the use of mobile phones is prohibited Inside airplane or hospital, follow instructions of the airline company or medical facility. Power off this terminal in places banning the use of it.
