English LG-E510g User Guide This guide helps you get started using your phone. If you need more information, please visit www.lg.com. • Some of the contents of this manual may not apply to your phone. This depends on your phone’s software and your service provider. • This handset is not recommended for the visually impaired because of its touch screen keyboard. • Copyright ©2011 LG Electronics, Inc. All rights reserved. LG and the LG logo are registered trademarks of LG Group and its related entities.
This device is not intended for sale in the USA. Part 15.21 statement " Change or Modifications that are not expressly approved by the manufacturer could void the user's authority to operate the equipment. “ Part 15.105 statement This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
FCC Part 15 Class B Compliance This device and its accessories comply with part 15 of FCC rules and ICES-003 Class B digital apparatus requirements for Industry Canada. Operation is subject to the following two conditions:(1) This device and its accessories may not cause harmful interference, and (2) this device and its accessories must accept any interference received, including interference that may cause undesired operation.
Conformité aux normes FCC Part 15 Class B Cet appareil et ses accessoires sont conformes aux normes FCC Part 15 Class B de la Federal Communications Commission et aux exigences pour appareils numériques ICES-003 Class B d’Industrie Canada.
Getting to know your phone To turn on your phone, press and hold the Power key for 3 seconds. To turn off the phone, press and hold the Power key for 3 seconds, then touch Power off and OK. Speaker/Receiver Power/Lock key Switch your phone on/off by pressing and holding this key. Turn off and lock the screen. Proximity sensor Menu key Check what options are available. Home key Return to home from any screen. Back key Return to the previous screen.
Volume keys On the home screen: control ringer volume. • During a call: control your earpiece volume. • When playing a track: control volume continuously.
Getting to know your phone NOTE: Proximity sensor When receiving and making calls, the proximity sensor automatically turns the backlight off and locks the touch keypad by sensing when the phone is near your ear. This extends battery life and prevents the touch keypad from activating unintentionally during calls. WARNING Placing a heavy object on the phone or sitting on, it can damage its LCD and touch screen functions. Do not cover the protective film on the LCD’s proximity sensor.
Installing the SIM card and battery 1 To remove the back cover, hold the phone in your hand firmly. With the other hand, firmly press your thumb on the back cover. Now lift off the battery cover. 2 Slide the SIM card into the SIM card slot. Make sure the gold contact area on the card is facing downwards.
Getting to know your phone 3 Insert the battery by aligning the gold contacts on the phone and the battery. 4 Replace the back cover of the phone. Charging your phone Slide open the cover of the charger connector on the side. Insert the charger, then plug it into an electrical outlet. Your LGE510g must be charged before you see . NOTE: the battery must be fully charged initially to improve battery lifetime.
Installing the memory card To store multimedia files, such as images captured using the built-in camera, you must insert a memory card into your phone. NOTE: the LG-E510g supports memory cards up to 32 GB. To insert a memory card: 1 Turn the phone off before inserting or removing a memory card. Remove the back cover.
Getting to know your phone 2 Insert the memory card into the slot. Make sure the gold contact area is facing downwards. WARNING Do not insert or remove the memory card when the phone is on. Doing so may damage the memory card as well as your phone, and the data stored on the memory card may be corrupted.
Formatting the memory card Your memory card may already be formatted. If it isn’t, you must format it before you can use it. NOTE: all files on the card are deleted when you format the card. 1 In the Home screen, touch the Applications tab to open the applications menu. 2 Scroll to and touch Settings > Storage, then select Mass storage only. 3 Touch Unmount SD card. 4 Touch Erase SD card, then confirm your choice. 5 If you have set a pattern lock, input the pattern lock then select Erase Everything.
Your Home screen Touch screen tips NOTE: Here are some tips on how to navigate around your phone. Touch – to choose a menu/option or open an application, touch it. Touch and hold – to open an options menu or grab an object you want to move, touch and hold it. Drag – to scroll through a list or move slowly, drag across the touch screen. Flick – to scroll through a list or move quickly, flick across the touch screen (drag quickly and release). • To select an item, touch the centre of the icon.
Lock your phone When you are not using the LG-E510g, press the power key to lock your phone. This helps prevent accidental presses and saves battery power. Also, if you do not use the phone for a while, the Home screen or another screen you are viewing is replaced with the lock screen to conserve battery power. If there are any programs running when you set the pattern, they may be still running in Lock mode.
Your Home screen the phone. In this case, your personal information and downloaded data is deleted. Unlock screen Whenever your LG-E510g is not in use, it returns to the lock screen. Drag your finger from bottom to top to unlock the screen. Silent mode In the notification drawer, to be. touch Home Simply swipe your finger to the left or right to view the panels. You can customise each panel with widgets, shortcuts (to your favourite applications), folders and wallpaper.
In your Home screen, you can view quick keys at the bottom of the screen. Quick keys provide easy, one-touch access to the functions you use the most. Touch the Phone icon to bring up the touch screen dialpad to make a call. Touch the Contacts icon to open your contacts. Touch the Message icon to access the messaging menu. This is where you can create a new message. Touch the Applications tab at the bottom of the screen. You can then view all your installed applications.
Your Home screen 1 In the Home screen, press the Menu key and select Add. Or touch and hold the empty part of the home screen. 2 In the Edit Mode menu, touch the type of item you want to add. 3 For example, select Folders from the list and tap it. 4 You then see a new folder icon on the Home screen. Drag it to the desired location on the desired panel, then take your finger off the screen.
Returning to recently-used applications 1 Touch and hold the Home key. The screen displays a pop-up with icons of applications you used recently. 2 Touch an icon to open the application. Or touch the Back key to return to the current application. Notification drawer The notification drawer runs across the top of your screen.
Your Home screen Touch and slide the notification drawer down with your finger. Or, in the Home screen, press the Menu key and select Notifications. Here you can check and manage sound, Wi-Fi, Bluetooth and GPS as well as other notifications. Viewing the status bar The status bar uses different icons to display phone information such as signal strength, new messages, battery life and active Bluetooth and data connections.
Icon Description No SIM card No signal Airplane mode Icon Description Call in progress Call hold Speakerphone Connected to a WiFi network Phone microphone is muted Wi-Fi Direct is on.
Your Home screen Icon Description Battery fully charged Icon Description Downloading data Battery is charging Uploading data Data in and out GPS is acquiring Phone is connected to PC via USB cable Receiving location data from GPS Icon Description 3 more notifications not displayed Data is syncing Download finished On-Screen Phone connected New Gmail New Google Talk message
Icon Description New message Song is playing Upcoming event FM radio turned on in the background SmartShare On Icon Description SmartShare sharing request USB tethering is active Portable Wi-Fi hotspot is active Icon Description Both USB tethering and portable hotspot are active
Your Home screen Onscreen keyboard You can enter text using the onscreen keyboard. The onscreen keyboard appears automatically on the screen when you need to enter text. To manually display the keyboard, simply touch a text field where you want to enter text. Using the keypad & entering text Tap once to capitalise the next letter you type. Double tap for all caps. Tap to switch to the numeric and symbol keyboard. You can also touch and hold this tab to view the Settings menu.
Entering accented letters When you select French or Spanish as the text entry language, you can enter special French or Spanish characters (e.g. “á”). For example, to input "á", touch and hold the "a" key until the zoom-in key grows bigger and displays characters from different languages. Then select the special character you want.
Google account setup When you first turn on your phone, you have the opportunity to activate the network, to sign into your Google Account and how you want to use some Google services. To set up your Google account : * Sign into a Google Account from the prompted set up screen. OR * Applications > select a Google appication, such as Gmail > select Create to create a new accout. if you have a Google account, enter your email address and passwd, the touch Sign in.
After signing in, you can use Gmail™ and take advantage of Google services on your phone.
Wi-Fi With Wi-Fi, you can use high-speed Internet access within the coverage of the wireless access point (AP). Enjoy wireless Internet using Wi-Fi, without extra charges. Turning on Wi-Fi From the Home screen, open the notification . drawer and touch Or touch Application > Settings > . Wireless & networks, then > Wi-Fi Connecting to Wi-Fi Choose the Wi-Fi network you want to connect to. If you see , you need to enter a password to connect.
• In this case, if your phone has access to 3G data, it may connect to the 3G network automatically and additional charges may apply. • The LG-E510g supports WEP, WPA/WPA2PSK and 802.1x EAP security. If your Wi-Fi service provider or network administrator sets encryption for network security, enter the key into the pop-up window. If encryption is not set, this pop-up window is not shown. Obtain the key from your Wi-Fi service provider or network administrator.
Wi-Fi Icon Description USB tethering is active Portable Wi-Fi hotspot is active Both USB tethering and portable hotspot are active For the latest information about tethering and portable hotspots, including supported operating systems and other details, visit http://www.android.com/tether. NOTE: additional costs may be incurred when connecting and using online services. Check data charges with your network provider.
USB tethering – tick to share your phone’s mobile network data connection with your computer via a USB connection. Portable hotspot – tick to share your phone’s mobile network data connection as Wi-Fi sharing. Help – opens a dialog with information about USB tethering and portable Wi-Fi hotspots as well as information on where to learn more.
Wi-Fi USB tethering and data sharing You can’t share your phone’s data connection and microSD card via USB at the same time. If you are using your USB connection to make your microSD card available to your computer, you must disconnect it first. 1 Use the USB cable that came with your phone to connect your phone to your computer. 2 In the Home screen, touch the Applications tab and select Settings. 3 Touch Wireless & networks and select Tethering & portable hotspot. 4 Tick USB tethering.
To share your phone’s data connection as a portable Wi-Fi hotspot 1 In the Home screen, touch the Applications tab and select Settings. 2 Touch Wireless & networks and select Tethering & portable hotspot. 3 Tick Portable hotspot. • After a moment, the phone starts broadcasting its Wi-Fi network name (SSID) so you can connect to it with up to eight computers or other devices. An is added to the ongoing notification status bar and notifications drawer.
Wi-Fi 2 Touch Wireless & networks and select Tethering & portable hotspot. 3 Ensure Portable hotspot is ticked. 4 Touch Portable hotspot settings. 5 Touch Configure Wi-Fi hotspot. • The Configure Wi-Fi hotspot dialog opens. • You can change the network SSID (name) that other computers see when scanning for Wi-Fi networks. • You can also touch the Security menu to configure the network with Wi-Fi Protected Access 2 (WPA2) security, with a preshared key (PSK).
ATTENTION! If you set the security option as Open, you cannot prevent unauthorised usage of online services by other people and additional charges can be incurred. To avoid unauthorised usage, you are advised to keep the security option active. 6 Touch Save. Enabling Wi-Fi Direct to share through SmartShare Wi-Fi Direct cannot be enabled while using other Wi-Fi functions.
Wi-Fi 3 Ensure Wi-Fi Direct is selected. 4 Select a device to connect in the scanned device list. Forced Group owner mode – Touch to activate group owner mode that enables the legacy Wi-Fi devices to connect by scanning your phone. In this case you must enter the password that is set in the Menu > Advanced > Password. NOTE: When your phone becomes group owner, it will consume more battery power than being a client. Wi-Fi Direct connection does not provide Internet service.
1 On the home screen, touch the Application tab and select Settings. 2 Touch Wireless & networks and select Wi-Fi Direct Settings. 3 Ensure Wi-Fi Direct is selected and select a device to connect in the scanned device list. 4 Touch Connect. NOTE: Wi-Fi cast is activated between the users. Make sure to connect to same Wi-Fi Network between the users.
On-Screen Phone How to use On-Screen Phone On-Screen Phone allows you to view your mobile phone screen from a PC via a USB or Bluetooth connection. You can also control your mobile phone from your PC using the mouse or keyboard. On-Screen Phone icons Changes the On-Screen Phone preferences. Exits the On-Screen Phone program. Minimises the On-Screen Phone window.
• Text input with keyboard: allows you to compose a text message or note using your computer keyboard. • File transfer (mobile phone to PC): sends a file from your mobile phone (e.g. photos, videos, music and Polaris viewer files) to your PC. Simply right-click and drag to send a file to your PC. • File transfer (PC to mobile phone): sends files from your PC to your mobile phone. Simply select the files you wish to transfer and drag and drop into the On-Screen Phone window.
On-Screen Phone How to connect your mobile phone to your PC USB connection: 1 Open Connection Wizard, select "USB Cable connection" and click "Next". 2 Connect your mobile phone to the PC using a USB cable and click "Next". 3 Enter the On-Screen Phone password and click "Next". The default password is "0000". You can change the password in Settings > Wireless & networks > OnScreen Phone Settings. 4 Click "OK" to exit the window.
3 Run the Connection Wizard on the computer, select "Bluetooth connection", then "Next". 4 The wizard starts searching for Bluetoothenabled mobile phones. When the mobile phone that you wish to connect to appears, click "Stop" to stop searching. 5 Select "LG-E510g" from the device list and click "Next". You can rename the device if you wish. 6 Enter the PIN code (e.g. "0000") and click "Next". 7 On your mobile phone, accept the request and check the same PIN code, then touch "OK".
On-Screen Phone To disconnect your phone from your PC Click in the top left of the On- Screen Phone window. Or drag down the notification bar at the top of the home screen and select "On-Screen Phone". Touch "Yes" in the Disconnect window. NOTE: You must restart your phone after shutting down the On-Screen Phone service.
Calls Making a call Calling your contacts 1 Touch to open the keypad. 2 Enter the number using the keypad. To . delete a digit, touch the Clear icon 3 Touch the Call icon to make a call. 4 To end a call, touch the End icon . 1 Touch to open your contacts. 2 Scroll through the contact list or enter the first letter(s) of the contact you want to call by touching Search. 3 In the list, touch the contact you want to call. TIP! To enter “+” to make international calls, touch and hold .
Calls messages bar from the bottom if you want to send one. If the caller is unknown, the Excuse messages bar is not available. TIP! Excuse messages When you reject a call, you can send a message quickly by touching Send SMS. This is useful if you need to reply the message during a meeting. Adjusting call volume To adjust the in-call volume during a call, use the Volume Up and Down key on the left side of the phone. Making a second call 1 During your initial call, touch Dialpad.
notification bar down and select End calls. NOTE: you are charged for each call you make. Viewing your call logs In the Home screen, touch and choose the Call log tab. View a complete list of all dialled, received and missed voice calls. TIP! Touch any call log entry to view the date, time and duration of the call. TIP! Press the Menu key, then touch Delete all to delete all the recorded items.
Contacts Add contacts to your phone and synchronise them with the contacts in your Google account or other accounts that support contact syncing. Searching for a contact In the Home screen 1 Touch to open your contacts. 2 Touch Search and enter the contact name using the keyboard. Adding a new contact 1 Touch , enter the new contact’s number, then press the Menu key. Touch Add to contacts and then Create new contact. 2 If you want to add a picture to the new contact, touch .
Favourite contacts You can classify frequently called contacts as favourites. Adding a contact to your favourites 1 Touch to open your contacts. 2 Touch a contact to view its details. 3 Touch the star to the right of the contact’s name. The star turns gold. Removing a contact from your favourites list 1 Touch to open your contacts. 2 Touch the Group tab, select Favorites at the top of the list and choose a contact to view its details. 3 Touch the yellow star to the right of the contact’s name.
Contacts Moving contacts from your old phone to your new phone Export your contacts as a CSV file from your old phone to your PC using a PC sync program. 1 Download PC Suite IV from www.lg.com and install it on the PC. Run the program and connect your Android mobile phone to the PC using the USB cable. 2 Select the Contacts icon. Go to Menu > File > Import and select the CSV file saved on your PC. 3 If the fields in the imported CSV file are different from those in PC Suite IV, you need to map the fields.
Messaging/email Messaging Your LG-E510g combines SMS and MMS into one intuitive, easy-to-use menu. Sending a message 1 Touch icon on the home screen, and touch New message to open a blank message. 2 Enter a contact name or contact number in the To field. As you enter the contact name, matching contacts appear. You can touch a suggested recipient. You can add multiple contacts. NOTE: You will be charged for a text message for every person you send the message to.
Messaging/email WARNING: The 160-character limit may vary from country to country depending on how the SMS is coded and in what language. WARNING: If an image, video, or audio file is added to an SMS message, it will be automatically converted into an MMS message, and you will be charged accordingly. NOTE: When you get an SMS message during a call, there will be a ring notification.
Changing your message settings Opening Email and the Accounts Screen Your LG-E510g message settings are predefined, so you can send messages immediately. You can change the settings based on your preferences. WARNING: In this mode, the MMS Client device guides the user in creating and sending messages with content belonging to the Core MM Content Domain. This guidance is provided through warning dialogs. You can use the Email application to read email from services other than Google Mail.
Messaging/email have only one account) or the Accounts screen (if you have multiple accounts). The Accounts screen The Accounts screen lists your Combined Inbox and each of your email accounts. 1 Open the Email application. If you’re not on the Account screen, press the Menu Key and touch Accounts. 2 Select the Email service provider. - Touch to open your Combined Inbox, with messages sent to all of your accounts. - Touch to open a list of just your starred messages.
1 Touch Email. 2 Touch Combined Inbox (in the Accounts screen). Messages in the Combined Inbox are colour coded along their left sides, by account, using the same colours that are used for your accounts in the Accounts screen. Only your account’s most recent emails are downloaded to your phone. To download more (earlier) email messages, touch Load more messages at the bottom of the emails list.
Messaging/email 5 Press the Menu Key and touch Add Attachment to send a file with the message. 6 Touch the Send button. If you’re not ready to send the message, touch the Save as draft button to save it in a Drafts folder. Touch a draft message in a Drafts folder to resume working on it. Your message will also be saved as a draft if you touch the Back Key before sending it. Touch the Discard button to abandon and delete a message, including any saved drafts.
often need to open the Sent folder/label and select Refresh from the options menu. Adding and Editing Email Accounts To add an email account 1 Press the Menu Key and touch Add account. 2 Select MS Exchange or Others, and enter account settings. Working with Account Folders 3 Enter a name for the account, confirm Each account has Inbox, Outbox, Sent, and how you want your name to appear in Drafts folders.
Messaging/email To change an account’s settings 1 Open the Accounts screen. 2 Touch and hold the account whose settings you want to change. In the menu that opens, touch Account settings. To delete an email account 1 Open the Accounts screen. 2 Touch and hold the account you want to delete. 3 Touch Remove account in the menu that opens. 4 Touch the OK button in the dialog box to confirm that you want to delete the account.
Adding your account to your phone 1 On the home screen, choose any SNS application you want to use. 2 If you don't yet have an account, touch Sign up now and input details. 3 Enter the e-mail address and password that you set up on your community, then tap Log in. 4 Wait while your details are checked with your community. 5 Check your community is turned ON. If you tap your community, you can see the current status of your social community.
Messaging/email Viewing and updating your status Removing accounts on your phone 1 Choose a community you want to access. 2 You can see the current status of your social community. 3 You can update your status with comments or by uploading photos. Choose Settings > Accounts & sync > Choose an account you want to delete > Touch Remove account. NOTE: This is dependent on network services. TIP! You can use information about friends only in SNS or sync all data to Contacts.
Camera Getting to know the viewfinder TIP! Close all shortcut options to give a clearer viewfinder screen. Touch the centre of the viewfinder once. To display the options, touch the screen again. Zoom - zoom in or zoom out. Alternatively you can use the side volume keys. Brightness - this defines and controls the amount of sunlight entering the image. Slide the brightness indicator along the bar towards “-” to lower the brightness of the image or towards “+” to increase it.
Camera Taking a quick photo 1 Open the Camera application. 2 Hold the phone horizontally and point the lens towards the subject you want to photograph. 3 In the centre of the viewfinder screen, a focus box starts blinking as it tries to get the subject in focus. 4 The focus box turns green when the subject is in focus. 5 Press the capture button. You can press the capture button whether the focus box is green or not. 6 Press the capture button.
TIP! If you have an SNS account and set it up on your phone, you can share your photo with the SNS community. Set as Touch to use the image as a Contact icon or wallpaper. Rename Touch to edit the name of the picture just taken. Touch to delete the image. Touch to take another photo immediately. Your current photo is saved. Touch to view a gallery of your saved photos. Using the advanced settings In the viewfinder, touch to open all advanced options. Change camera settings by scrolling through the list.
Camera camera is. This is useful in darker conditions when you cannot use the flash. Select from ISO values of Auto, 400, 200 and 100. White balance – choose from Auto, Incandescent, Sunny, Fluorescent and Cloudy. Color effect – choose a colour tone for your new photo. Timer – the self-timer allows you to set a delay after the capture button is pressed. Select Off, 3 secs., 5 secs. or 10 secs. This is ideal if you want to be in the photo. Image quality – choose from Super fine, Fine and Normal.
location. If you upload tagged pictures to a blog that supports geotagging, you can see the pictures displayed on a map. NOTE: this function is only available when GPS is active. – Restore all camera default settings. – Touch whenever you want to know how this function operates. This provides you with a quick guide. TIP! When you exit the camera, some settings return to their defaults, such as white balance, colour tone, timer and scene mode. Check these before you take your next photo.
Camera Viewing your saved photos Access your saved photos while in Camera and touch the screen. mode. Just touch You then see Slideshow and Menu. TIP! Flick left or right to view other photos or videos. - Touch to see a slideshow. - Touch to share the contents or delete a photo. Touch More for more options. Details – check information on the content. Set as – set as a contact icon or wallpaper. Crop – crop your photo. Move your finger across the screen to select the area. Rotate – rotate left or right.
Video camera Getting to know the viewfinder Zoom - zoom in or zoom out. Alternatively you can use the side volume keys. Brightness - this defines and controls the amount of sunlight entering the video. Slide the brightness indicator along the bar towards “-” to lower the brightness of the video or towards “+” to increase it. Video size - touch to set the size (in pixels) of the video you record. Duration - set a duration limit for your video.
Video camera Shooting a quick video 1 Slide the Camera mode button down and the icon changes to . 2 The video camera viewfinder appears on the screen. 3 Holding the phone horizontally, point the lens towards the subject you want to capture in your video. 4 Press the Record button once to start recording. 5 REC appears at the bottom of the viewfinder with a timer showing the length of the video. 6 Touch on the screen to stop recording.
Rename Touch to edit the name of the selected video. Touch to shoot another video right away. Your current video is saved. Touch to delete the video you just made. Confirm by touching Yes. The viewfinder reappears. Touch to view a gallery of your saved videos. Using the advanced settings Using the viewfinder, touch to open all the advanced options. Adjust the video camera setting by scrolling through the list. After selecting the option, touch the Back key.
Video camera Color effect – choose a colour tone to use for your new view. Video quality – choose from Super fine, Fine and Normal. Audio recording – choose Mute to record a video without sound. Auto review – auto review automatically shows you the video you just recorded. – Restore all video camera default settings. – Touch if you want to know how this function operates. This provides you with a quick guide. Watching your saved videos 1 In the viewfinder, touch . 2 Your gallery appears on the screen.
Multimedia You can store multimedia files on a memory card to have easy access to all your image and video files. Touch the Applications tab, then select Gallery. Open a list of catalogue bars that store all your multimedia files. NOTE: make sure you install a memory card in the phone to save photos and access all your pictures. Without a memory card, the phone does not display photos or videos without Picasa images, which are in your Picasa album. View mode Touch Gallery. Folder view is displayed.
Multimedia Using SmartShare SmartShare provides you with a better way to enjoy multimedia contents with other DLNA (Digital Living Network Alliance) enabled devices. * Share your media contents with other DLNA devices (DMS) 1 In the Home screen, touch the Applications tab and select SmartShare. 2 Press the Menu key and select Settings. 3 Touch the Discoverable tickbox to turn on. 4 You can change your device name, icon and select the sharing content types. * Let your renderer device (e.g.
Notice: check that your device is connected to your home network using a Wi-Fi connection in order to use this application. Notice: some DLNA-enabled devices (e.g. TV) support only DMP features of DLNA and will not appear in the renderer device lists. Music Your LG-E510g has a built-in music player that lets you play all your favourite tracks. To access the music player, touch Music. Playing a song 1 In the Home screen, touch the Applications tab and select Music. 2 Touch Songs.
Multimedia To change the volume while listening to music, press the up and down volume keys on the left-hand side of the phone. Touch and hold any song in the list. It displays Play, Add to playlist, Use as phone ringtone, Delete, Details, Share and Search as options. NOTE: music file copyrights may be protected by international treaties and national copyright laws. Therefore, it may be necessary to obtain permission or a licence to reproduce or copy music.
Transferring files using USB mass storage devices To transfer files using USB devices 1 Connect the LG-E510g to a PC using a USB cable. 2 If you haven't installed LG Android Platform Driver on your PC, you need to change the settings manually. Choose Settings > Storage, then select Mass storage only. 3 Touch Turn on USB storage. 4 You can view the mass storage contents on your PC and transfer the files. NOTE: you need to install an SD card first. Without an SD card, you cannot use USB mass storage.
Multimedia If you didn't install LG Android Platform Driver on your PC, you must set it up manually. For more information, refer to 'Transferring files using USB mass storage devices'. 2 Save music or video files from the PC to the phone's removable storage. • You can copy or move files from your PC to your phone's removable storage using a card reader. • If there is a video file with a subtitle file (*.
Bluetooth menu as on most other mobile phones. * Sending pictures: run the Gallery application, then select Picture > Menu. Click Share, then select Bluetooth. Check whether Bluetooth is turned on, then select Scan for devices. Choose the device you want to send data to from the list. * Exporting contacts: run the Contacts application. Touch the address you want to export to. Press the Menu key and select Share > Bluetooth. Check whether Bluetooth is turned on, then select Scan for devices.
Multimedia * Connecting to FTP (only FTP server is supported on this handset): select Settings > Wireless & networks > Bluetooth Settings. Select the Discoverable box so you can search for your phone on other devices. Find the FTP service and connect to the FTP server. • If you want to search for this phone from other devices, go to Settings > Wireless & networks > Bluetooth Settings. Select the Discoverable box. The box is cleared after 120 seconds.
You can store up to 48 channels on your phone. Tuning in automatically 1 In the Home screen, touch the Applications tab and select FM Radio. 2 Press the Menu key, then touch Auto scan. 3 If there are preset channels, you will see a pop-up asking "Reset all channels and start auto scan?". If you choose OK, all the preset channels are deleted and Auto scan starts. 4 During auto scanning, touch Stop if you want to stop scanning. Only scanned channels are saved before you stop scanning.
Multimedia Listening to the radio Touch Listen Via to set the speaker or headset to listen to the radio. TIP! To improve radio reception, extend the headset cord as this also functions as the radio antenna. WARNING If you connect a headset not specifically made for radio reception, radio reception may be poor.
Utilities Setting your alarm 1 In the Home screen, touch the Applications tab and select Clock. 2 If you want to add a new alarm, touch and select Add alarm. 3 Set the time, then touch to turn on the alarm. After you set the time, the LGE510g lets you know how much time is left before the alarm will sound. 4 Set Repeat, Ringtone or Vibrate, then add a label to name the alarm. Touch Done. NOTE: to change alarm settings on alarm list screen, press the Menu key and select Settings.
Utilities 4 For more complex calculations, press the Menu key, touch the Advanced panel, then choose sin, cos, tan, log and so on. Adding an event to your calendar 1 In the Home screen, touch the Applications tab and select Calendar. 2 To check the event, touch the date. Touch and hold if you want to add a new event. Touch New event. 3 Touch What then enter the event name. Check the date and enter the time you want your event to start and finish. 4 Also, touch Where then enter the location.
Changing your calendar view 1 In the Home screen, touch the Applications tab and select Calendar. Press the Menu key. 2 Select the calendar view for a particular day, week or month. Polaris Viewer Polaris Viewer is a professional mobile office solution that lets users conveniently view various types of office documents, including Word, Excel and PowerPoint files, anywhere, anytime, using their mobile devices.
Utilities Voice recorder Use the voice recorder to record voice memos or other audio files. Recording a sound or voice 1 In the Home screen, touch the Applications tab and select Voice Recorder. 2 Touch to begin recording. to end the recording. 3 Touch to listen to the recording. 4 Touch NOTE: touch to access your album. You can listen to the saved recording. Notice: the available recording time may differ from the real time.
The Web Browser Browser gives you a fast, full-colour world of games, music, news, sport, entertainment and much more, right on your mobile phone. Wherever you are and whatever you enjoy. NOTE: additional charges apply when connecting to these services and downloading content. Check data charges with your network provider. Using the web toolbar Touch to go backwards one page. Touch to go forwards one page to the one you connected to after the current page.
The Web Using options Press the Menu key to view options. Read it later – add the current web page as a bookmark. Add RSS Feed – add the current web page to the RSS feed. Share page – allows you to share the web page with others. Find on page – allows you to find letters or words on the current web page. Select text – allows you to copy any text from the web page. More • Home page: go to the Home page. • Set Home page: set the current web page as your Home page.
• Downloads: displays your download history. TIP To return to the previous web page, press the Back key.
Settings In the Home screen, touch the Applications tab then scroll to and touch Settings. Wireless & networks Here, you can manage Wi-Fi and Bluetooth. You can also set up mobile networks and switch to airplane mode. Airplane mode – after switching to airplane mode, all wireless connections are disabled. Wi-Fi – touch to tick: This turns on Wi-Fi to connect to available Wi-Fi networks. Wi-Fi settings – allows you to set up and manage wireless access points.
TIP! How to obtain the MAC address To set up a connection in some wireless networks with MAC filters, you may need to enter the MAC address of your LG-E510g into the router. You can find the MAC address in the following user interface: Touch Application > Settings > Wireless & networks > Wi-Fi settings, and press the Menu key. Then select Advanced > MAC Address. Bluetooth – touch to tick: This turns on Bluetooth to connect to Bluetooth devices.
Settings previously configured. Allows you to add different types of VPN. Mobile networks – set options for data roaming, network mode & operators, access point names (APNs) and so on. On-Screen Phone settings – Allows you to change the On-Screen Phone password (the default password is "0000"). On-Screen Phone allows you to view your mobile phone screen from a PC via a USB or Bluetooth connection. You can also control your mobile phone from your PC using the mouse or keyboard.
you to enter the phone number to use for listening to and managing your voicemail. < Other call settings > Excuse messages – when you want to reject a call, you can send a quick message using this function. This is useful if you need to reject a call during a meeting. Call forwarding – choose whether to divert all calls, when the line is busy, when there is no answer or when you have no signal. Call barring – select when you would like calls to be barred. Enter the call barring password.
Settings Caller ID: choose whether to display your number on an outgoing call. Call waiting: if call waiting is activated, the handset will notify you of an incoming call while you are on the phone (depending on your network provider). Sound < General > Silent mode – allows you to silence all sounds (including call and notification ringtones) except the audio from music and videos and any alarms you have set. You must silence media and alarms in their own applications.
< Notifications > Notification ringtone – allows you to set your default notification ringtone. < Feedback > Audible touch tones – allows you to set the phone to play tones when using the dialpad to dial numbers. Audible selection – allows you to set your phone to play a sound when you touch buttons, icons and other onscreen items that react to your touch. Screen lock sounds – allows you to set your phone to play a sound when locking and unlocking the screen.
Settings Location & security Use wireless networks – if you select Use wireless networks, your phone determines your approximate location using Wi-Fi and mobile networks. When you select this option, you’re asked whether you consent to allowing Google to use your location when providing these services. Use GPS satellites – if you select Use GPS satellites, your phone determines your location to street level accuracy. Set up screen lock – set an unlock pattern to secure your phone.
Select device administrators – add one or more administrators. Use secure credentials – allows you to access secure certificates. Install from SD card – choose to install encrypted certificates from your SD card. Set password – set or change the credential storage password. Clear storage – clear credentials for all content and reset password. Applications You can manage applications and set up quick launch shortcuts. Unknown sources – default setting to install non-Market applications.
Settings Battery usage – see what has been using the battery. Development – set options for application development. Accounts & sync < General sync settings > Background data – permits applications to synchronise data in the background, whether or not you are actively working in them. Unticking this setting can save battery power and lowers (but does not eliminate) data usage. Auto-sync – permits applications to synchronise, send and receive data to their own schedule.
your Google account, any other accounts, your system/application data and settings as well as any downloaded applications and DRM licence. Resetting the phone does not erase any system software updates you have downloaded or any files on your microSD card, such as music or photos. If you reset the phone in this way, you are prompted to re-enter the same information that you did when you first started Android.
Settings < Internal storage > Checks the available space. Language & keyboard Set local language and region as well as keyboard settings. Voice input & output < Voice input > Voice recognizer settings – use the Voice recognizer settings to configure the Android voice input feature. • Language: opens a screen where you can set the language you use speech to enter text. • SafeSearch: opens a dialog where you can set whether you want the Google SafeSearch filter to block some results.
< Voice output > Text-to-speech settings – use the Text-to-speech settings to configure the Android text-to-speech synthesiser for applications that can use this feature. NOTE: if you don’t have speech synthesiser data installed, only the Install voice data setting is available. • Listen to an example: plays a brief sample of the speech synthesiser, using your current settings.
Settings This setting is not available if the data is already installed. • Speech rate: opens a dialog where you can select how quickly you want the synthesiser to speak. • Language: opens a dialog where you can select the language of the text you want the synthesiser to read. This is particularly useful in combination with Always use my settings to ensure that text is spoken correctly in a variety of applications. • Pico TTS: configure the Pico TTS settings.
About Phone View legal information and check phone status and software version.
Software update Phone software update LG Mobile phone software update from the Internet For more information about using this function, please visit the http://update. lgmobile.com or http://www.lg.com/ common/ index.jsp J select country and language. This feature allows you to update the firmware on your phone to a newer version conveniently from the Internet without needing to visit a service centre.
not guarantee the availability of the newer version of the firmware for all handset models. LG Mobile Phone software update via Over-the-Air (OTA) This feature allows you to update the firmware of your phone to the newer version conveniently via OTA without connecting the USB data cable. This feature is only available if and when LG makes the newer version of the firmware available for your device.
Software update DivX Mobile ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an official DivX Certified® device that plays DivX video. Visit divx.com for more information and software tools to convert your files into DivX videos. ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play purchased DivX Videoon-Demand (VOD) movies.
Notice: Open Source Software To obtain the corresponding source code under GPL, LGPL, MPL and other open source licences, please visit http://opensource.lge.com/ All referred licence terms, disclaimers and notices are available for download with the source code.