User's Manual

76
Media sync(MTP)
Allows the phone to be used as MTP device
including a microSD cardpresented in the
phone. It allows transfer of protected content
from thephone to the PC and vice versa.
To synchronize your phone with your
computer using the USB
1. Connect your phone to your computer with
a USB cable.
2. Autorun will check whether MTP driver is
installed or not in your PC.
3. If no, MTP driver will be installed
automatically and your PC will be rebooted.
After rebooting, it is possible to transfer any
fi les between the phone and the PC.
n
NOTE
For Windows® XP, MTP driver is not installed
by default. So, Autorun will install MTP driver
automatically after checking existence of the
driver.If Windows Media Player(WMP) over
version 10.x is installed on the PC, MTP driver
may be installed.For Windows® 7 except for N
edition, the driver is installed.
USB Tethering
You can use your phone to provide a data
connection to a computer by activating data
tethering and connecting them with a USB
cable.
To tether your phone with your computer
using the USB
1 Connect your phone to your computer with
a USB cable.
2 The USB connection type prompt is
displayed. Tap USB tethering to confirm.
n
NOTE
- Data Tethering requires an appropriate
DataPro data plan. Devices connected
by tethering use data from your DataPro
plan. Plans are not unlimited and
significant charges may be incurred if
the included data allowance is exceeded.
Performance may vary depending on the
number of devices connected and other
factors.
- You cannot access your phone's microSD
card on your computer when using USB
tethering.
Ask on connection - Checkmark to have the
phone ask you to choose which USB connection
mode it should connect with to a PC.
Help - Touch to get information on the
different types of USB connections.
System Settings