User's Manual

51
6
7
8
When network setting is complete, the ‘SEARCH SERVER’ window will appear as shown left.
Press the button on the remote control to cancel. Do not then configure other items but install
the Media Library in the computer. (See page 44.)
The
‘SEARCH SERVER LIST’ window will appear if the Media Browser is successfully installed. Press
the button. Then, the IP address of the computer installed with the Media Browser will be displayed.
If it matches with the computer’s IP address, press the button.
If not, find the matching IP address using the and abutton on the remote control and, press the
button.
The Home screen of the Media Browser will appear and setting will be completed.
When Media Library installation is complete, run ‘LG Media Library Agent’. Then, the ‘Select Network Interface’ window will appear. Specify the wireless
LAN card adaptor you have installed.
• Run LG Media Library Agent. • Specify the wireless LAN card (or, Access Point(AP)).
• Share the folder to share when the ‘Media Library
Manager’ window appear. (See next page)
Using Media Browser
If the IP Address of the computer does not appear in the Select Media Server window, the wireless LAN card (or,
Access Point(AP)) setting must be incorrect or the Media Library is not installed properly. In this case, check
whether the wireless (or, Access Point(AP)) setting of the computer matches with that of the wireless TV, or the
Media Library is properly installed.