User's Manual

APPENDIX
87
01. Power ((Command : kk a)
To control Power On/Off of the TV.
Transmission [k][a][ ][Set ID][ ][Data][Cr]
Data 0 : Power Off Data 1 : Power On
Acknowledgement [a][ ][Set ID][ ][OK/NG][Data][x]
* In a like manner, if other functions transmit ‘FF’ data
based on this format, Acknowledgement data feedback
presents status about each function.
* In this model, TV will send the Acknowledge after
power on processing completion.
* There might be a time delay between command and
acknowledgement.
02. IInput SSelect ((Command : kk b) ((Main PPicture IInput)
To select input source for the TV.
Transmission [k][b][ ][Set ID][ ][Data][Cr]
Data 0: DTV Data 4: Component
Data 1: Analog Data 7: RGB-PC
Data 2: AV Data 8: HDMI
Acknowledgement [b][ ][Set ID][ ][OK/NG][Data][x]
03. AAspect RRatio ((Command: kk cc) ((Main ppicture fformat)
To adjust the screen format.
Transmission [k][c][ ][Set ID][ ][Data][Cr]
Date 1: 4:3 6: Set by program
2: 16:9
3: Horizon
4: Zoom
Acknowledgement [c][ ][Set ID][ ][OK/NG][Data][x]
04. Screen MMute ((Command: kk dd)
To select screen mute on/off.
Transmission [k][d][ ][Set ID][ ][Data][Cr]
Data 0 : Screen mute off (Picture on)
Data 1 : Screen mute on (Picture off)
Acknowledgement [d][ ][Set ID][ ][OK/NG][Data][x]
05. VVolume MMute ((Command: kk ee)
To control volume mute on/off.
You can also adjust mute using the MUTE button on
remote control.
Transmission [k][e][ ][Set ID][ ][Data][Cr]
Data 0 : Volume mute on (Volume off)
Data 1 : Volume mute off (Volume on)
Acknowledgement [e][ ][Set ID][ ][OK/NG][Data][x]
06. VVolume CControl ((Command: kk ff)
To adjust volume.
You can also adjust volume with the volume buttons on
remote control.
Transmission [k][f][ ][Set ID][ ][Data][Cr]
Data Min : 0 ~ Max : 64
Refer to ‘Real data mapping’ as shown below.
Acknowledgement [f][ ][Set ID][ ][OK/NG][Data][x]
07. CContrast ((Command: kk gg)
To adjust screen contrast.
You can also adjust contrast in the Video menu.
Transmission [k][g][ ][Set ID][ ][Data][Cr]
Data Min : 0 ~ Max : 64
Refer to ‘Real data mapping’ as shown below.
Acknowledgement [g][ ][Set ID][ ][OK/NG][Data][x]
08. Brightness ((Command: kk hh)
To adjust screen brightness.
You can also adjust brightness in the Video menu.
Transmission [k][h][ ][Set ID][ ][Data][Cr]
Data Min : 0 ~ Max : 64 (*transmit by Hexadecimal code)
Refer to ‘Real data mapping’ as shown below.
Acknowledgement [h][ ][Set ID][ ][OK/NG][Data][x]
09. CColor ((Command: kk ii)
To adjust the screen color.
You can also adjust color in the Video menu.
Transmission [k][i][ ][Set ID][ ][Data][Cr]
Data Min : 0 ~ Max : 64
Refer to ‘Real data mapping’ as shown below.
Acknowledgement [i][ ][Set ID][ ][OK/NG][Data][x]
*Real data mapping
0 : Step 0
A : Step 10 (SET ID 10)
F : Step 15 (SET ID 15)
10 : Step 16 (SET ID 16)
63 : Step 99 (SET ID 99)
64 : Step 100
* Tint : R50 ~ G50
* Balance : L50 ~ R50