Order Number : GETEC-C1-09-059 FCC Class B Certification Test Report Number : GETEC-E3-09-033 Page 1 / 1 APPENDIX H : USER’S MANUAL EUT Type: LCD TV/Monitor FCC ID.
LCD TV OWNER’S MANUAL 19LH20 22LH20 26LH20 32LH20 37LH20 42LH20 32LH30 37LH30 42LH30 47LH30 19LU55 22LU55 26LU55 32LF11 37LF11 42LF11 47LF11 Please read this manual carefully before operating your set and retain it for future reference. The model and serial number of the TV is located on the back and one side of the TV. Record it below should you ever need service.
WARNING / CAUTION WARNING / CAUTION To prevent fire or shock hazards, do not expose this product to rain or moisture. TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.
SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. 1 2 Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 7 Only use attachments/accessories specified by the manufacturer. 8 Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus.
SAFETY INSTRUCTIONS 4 11 Never touch this apparatus or antenna during a thunder or lighting storm. 12 When mounting a TV on the wall, make sure not to install the TV by the hanging power and signal cables on the back of the TV. 13 Do not allow an impact shock or any objects to fall into the product, and do not drop onto the screen with something.
20 ANTENNAS Outdoor antenna grounding If an outdoor antenna is installed, follow the precautions below. An outdoor antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can come in contact with such power lines or circuits as death or serious injury can occur. Be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges.
FEATURE OF THIS TV High-definition television. High-resolution digital television broadcast and playback system composed of roughly a million or more pixels, 16:9 aspect-ratio screens, and AC3 digital audio. A subset of digital television, HDTV formats include 1080i and 720p resolutions. Manufactured under license from Dolby Laboratories. “Dolby “and the double-D symbol are trademarks of Dolby Laboratories. is a trademark of SRS Labs, Inc.
PREPARATION ACCESSORIES Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the dealer where you purchased the TV. The accessories included may differ from the images below. 7 5 3 8 T L 0 6 9 FLAS HBK MU TE IN FO AV CH EN E TE A G P 4 TU LIS RN VO L IN PU GY T SAVIN G 3 6 0 9 FLAS HBK MU TE CH E EN ENER 5 8 T PO W ER 2 7 RE MOD E 1 R A G P TE MEN R U Q.ME NU RE TU RN 1.5V 1.
PREPARATION ■ Image shown may differ from your TV. PREPARATION 19/22LU55 MENU Button ENTER Button INPUT Button POWER Button INPUT MENU ENTER VOLUME CHANNEL (-, +) Buttons ( , ) Buttons VOL CH 26LU55 CH VOL CHANNEL ( Buttons , VOLUME (+, -) Buttons ENTER Button ENTER MENU Button MENU INPUT Button INPUT POWER Button SPEAKER Remote Control Sensor, Power/Standby Indicator Illuminates red in standby mode. Illuminates white when the TV is switched on.
BACK PANEL INFORMATION ■ Image shown may differ from your TV.
PREPARATION 1 USB IN SERVICE ONLY Used for software updates. 2 AV (Audio/Video) IN Analog composite connection. Supports standard definition video only (480i). 3 HDMI/DVI IN, HDMI IN Digital Connection. Supports HD video and Digital audio. Doesn’t support 480i. Accepts DVI video using an adapter or HDMI to DVI cable (not included). 4 RGB IN (PC) Analog PC Connection. Uses a D-sub 15 pin cable (VGA cable). AUDIO IN (RGB/DVI) 1/8" (0.32 cm) headphone jack for analog PC audio input.
PREPARATION VESA WALL MOUNTING PREPARATION Install your wall mount on a solid wall perpendicular to the floor. When attaching to other building materials, please contact your nearest installer. If installed on a ceiling or slanted wall, it may fall and result in severe personal injury. We recommend that you use an LG brand wall mount when mounting the TV to a wall. LG recommends that wall mounting be performed by a qualified professional installer.
CABLE MANAGEMENT ■ Image shown may differ from your TV. 1 PREPARATION For 19/22/26LU55 After connecting the cables as necessary, install CABLE HOLDER as shown and bundle the cables. For 32/37/42/47LF11 1 Connect the cables as necessary. To connect additional equipment, see the EXTERNAL EQUIPMENT SETUP section. 2 Install the CABLE MANAGEMENT CLIP as shown. CABLE MANAGEMENT CLIP 3 Fit the CABLE MANAGEMENT CLIP as shown.
PREPARATION DESKTOP PEDESTAL INSTALLATION ■ Image shown may differ from your TV. For proper ventilation, allow a clearance of 4 inches on all four sides from the wall. PREPARATION 4 inches 4 inches 4 inches 4 inches G CAUTION G Ensure adequate ventilation by following the clearance recommendations. Do not mount near or above any type of heat source.
ATTACHING THE TV TO A DESK (Except 19/22LH20, 19/22LU55, 47LH30, 47LF11) The TV must be attached to a desk so it cannot be pulled in a forward/backward direction, potentially causing injury or damaging the product. PREPARATION Stand 1-Screw (provided as parts of the product) Desk Stand 1-Screw (provided as parts of the product) Desk WARNING G To prevent TV from falling over, the TV should be securely attached to the floor/wall per installation instructions.
PREPARATION SECURING THE TV TO THE WALL TO PREVENT FALLING WHEN THE TV IS USED ON A STAND ■ PREPARATION ■ You should purchase necessary components to prevent the TV from tipping over (when not using a wall mount). Image shown may differ from your TV. We recommend that you set up the TV close to a wall so it cannot fall over if pushed backwards. Additionally, we recommend that the TV be attached to a wall so it cannot be pulled in a forward direction, potentially causing injury or damaging the product.
■ ■ To prevent damage do not connect to the power outlet until all connections are made between the devices. Image shown may differ from your TV. ANTENNA OR CABLE CONNECTION PREPARATION 1. Antenna (Analog or Digital) Wall Antenna Socket or Outdoor Antenna without a Cable Box Connections. For optimum picture quality, adjust antenna direction if needed.
EXTERNAL EQUIPMENT SETUP To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment. ■ This part of EXTERNAL EQUIPMENT SETUP mainly use picture for 2 6 / 3 2 / 3 7 / 4 2 L H 2 0. ■ HD RECEIVER SETUP This TV can receive digital over-the-air/digital cable signals without an external digital set-top box. However, if you do receive digital signals from a digital set-top box or other digital external device. EXTERNAL EQUIPMENT SETUP Component Connection 1.
HDMI Connection 1. How to connect 1 Connect the digital set-top box to the H D M I / D V I I N or H D M I / D V I I N 1 / 2*// 3* jack on the TV. AV IN VIDEO RGB IN (PC) AUDIO AUDIO IN (RGB/DVI) 2 2 L No separate audio connection is necessary. HDMI supports both audio and video. DEO OPT A R AUDIO 1 COMPONENT IN /DVI IN A C RS-232C IN (CONTROL&SERVICE) 2. How to use Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.
EXTERNAL EQUIPMENT SETUP DVI to HDMI Connection 1. How to connect EXTERNAL EQUIPMENT SETUP 1 Connect the DVI output of the digital set-top box to the H D M I / D V I I N or H D M I / D V I I N 1 / 2* jack on the TV. AV IN EO RGB IN (PC) AUDIO L(MONO) R AUDIO IN (RGB/DVI) OPTICAL DIGITA AUDIO OUT 2 L 2 Connect the digital set-top box audio output to the A U D I O I N ( R G B / D V I ) jack on the TV. 2.
PC SETUP This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings. VGA (D-Sub 15 pin) Connection 1 Connect the VGA output of the PC to the R G B I N ( P C) jack on the TV. RGB IN (PC) R AUDIO IN (RGB/DVI) 2 2 Connect the PC audio output to the A U D I O I N ( R G B / D V I) jack on the TV. OPTICAL DIGITAL AUDIO OUT R O 1 /DVI IN ANTENNA/ CABLE IN RS-232C IN (CONTROL&SERVICE) 2. How to use ■ ■ Turn on the PC and the TV.
EXTERNAL EQUIPMENT SETUP DVI to HDMI Connection 1. How to connect EXTERNAL EQUIPMENT SETUP 1 AV IN Connect the DVI output of the PC to the H D M I / D V I I N or H D M I / D V I I N 1 / 2* jack on the TV. VIDEO RGB IN (PC) AUDIO L(MONO) R AUDIO IN (RGB/DVI) 2 L 2 Connect the PC audio output to the A U D I O I N ( R G B / D V I ) jack on the TV. 2. How to use ■ ■ DEO R AUDIO 1 OMPONENT IN /DVI IN 1 AN CA RS-232C IN (CONTROL&SERVICE) 2 Turn on the PC and the TV.
! NOTES 19/22/26/32/37/42LH20, 19/26LU55: To get the the best picture quality, adjust the PC graphics card to 1360x768. G 32/37/42/47LH30, 22LU55, 32/37/42/47LF11: To get the the best picture quality, adjust the PC graphics card to 1920x1080. G Depending on the graphics card, DOS mode may not work if a HDMI to DVI Cable is in use. G In PC mode, there may be noise associated with the resolution, vertical pattern, contrast or brightness.
EXTERNAL EQUIPMENT SETUP Screen Setup for PC mode Selecting Resolution You can choose the resolution in RGB-PC mode. The P o s i t i o n, P h a s e, and S i z e can also be adjusted. EXTERNAL EQUIPMENT SETUP PICTURE SCREEN Enter E • Contrast 50 • Brightness 50 • Sharpness 50 • Color 50 • Tint 0 Resolution Auto Config. Position R G • Advanced Control • Picture Reset Screen (RGB-PC) Size Phase Reset 1 MENU 2 Select P I C T U R E. ENTER Select S c r e e n ( R G B - P C ).
Auto Configure Automatically adjusts picture position and minimizes image instability. After adjustment, if the image is still not correct, try using the manual settings or a different resolution or refresh rate on the PC. Move SCREEN Enter E • Contrast 50 • Brightness 50 • Sharpness 50 • Color 50 • Tint 0 Move Prev. Resolution Auto Config. To Set Position R G • Advanced Control • Picture Reset Screen (RGB-PC) Yes Size No Phase Reset 1 MENU 2 ENTER Select P I C T U R E.
EXTERNAL EQUIPMENT SETUP Adjustment for screen Position, Size, and Phase PICTURE Move SCREEN Enter Move Prev. E EXTERNAL EQUIPMENT SETUP If the picture is not clear after auto adjustment and especially if characters are still trembling, adjust the picture phase manually. This feature operates only in RGB-PC mode. • Contrast 50 • Brightness 50 • Sharpness 50 • Color 50 • Tint 0 Resolution Auto Config.
Screen Reset (Reset to original factory values) Returns P o s i t i o n, S i z e, and P h a s e to the default factory settings. This feature operates only in RGB-PC mode. Move SCREEN Enter Move Prev. E • Contrast 50 • Brightness 50 • Sharpness 50 • Color 50 • Tint 0 Resolution Auto Config. Position R To Set G • Advanced Control Size Yes No EXTERNAL EQUIPMENT SETUP PICTURE • Picture Reset Screen (RGB-PC) Phase Reset 1 MENU 2 Select P I C T U R E.
WATCHING TV / CHANNEL CONTROL TURNING ON THE TV First, connect power cord correctly. And switch the A C p o w e r c o n t r o l s w i t c h on TV (Except 32/37/42/47LF11). At this moment, the TV switches to standby mode. ■ In standby mode to turn TV on, press the ) button on the TV or press the , INPUT, C H (DE or POWER, INPUT, CH ( or ), Number (0~9 9 ) button on the remote control. 1 2 WATCHING TV / CHANNEL CONTROL Select the viewing source by using the INPUT button on the remote control.
INITIAL SETTING This Function guides the user to easily set the essential items for viewing the TV for the first time when purchasing the TV. It will be displayed on the screen when turning the TV on for the first time. It can also be activated from the user menus. H o m e U s e”. We recommend setting the TV to “H H o m e U s e” mode for the best picDefault selection is “H ture in your home environment. ■ “S S t o r e D e m o” Mode is only intended for use in retail environments.
WATCHING TV / CHANNEL CONTROL ON-SCREEN MENUS SELECTION Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual.
WATCHING TV / CHANNEL CONTROL CHANNEL SETUP Auto Scan (Auto Tuning) Automatically finds all channels available through antenna or cable inputs, and stores them in memory on the channel list. CHANNEL Move Enter WATCHING TV / CHANNEL CONTROL Auto Tuning Auto Tuning Manual Tuning Manual Tuning Channel Edit Channel Edit Move Enter Check your antenna connection. The previous channel information will be updated during Auto Tuning. Yes No 1 MENU 2 Select C H A N N E L.
Add/Delete Channel (Manual Tuning) When selecting DTV or CADTV input signal, you can view the on-screen signal strength monitor to see the quality of the signal being received. CHANNEL Move Enter CHANNEL Move Auto Tuning Manual Tuning Manual Tuning Channel Edit Channel Edit DTV F G Select channel type and RF-channel number. Channel 2 DTV 2-1 Bad Normal Good Delete Close 1 Select C H A N N E L. MENU 2 ENTER Select M a n u a l T u n i n g.
WATCHING TV / CHANNEL CONTROL Channel Editing The channels in the Channel Edit List are displayed in black and the channels deleted from the Channel Edit List are displayed in blue. When a channel number is deleted, it means that you will be unable to select it using CH button during TV viewing. If you wish to select the deleted channel, directly enter the channel number with the NUMBER buttons or select it in the C h a n n e l E d i t menu.
BRIEF INFORMATION Brief Info shows the present screen information. 1 INFO i Show the Brief Info on the screen. 2 Return to TV viewing. 7 1 2 3 4 5 6 Brief Info Title Test.. DOLBY DIGITAL CNN CC 4:3 16:9 480i 480p 720p 1080i 1080p Sat, Feb 21, 2009 Multilingual 10:40 AM 10:10 AM CC Caption 11:40 AM 1080i TV-PG D L S V Multilingual : The program contains two or more audio services. Use the Q . M E N U menu to select wanted Audio.
WATCHING TV / CHANNEL CONTROL INPUT LIST Only these input signals which are connected to a TV can be activated and selected. 1 ENTER INPUT Select the desired input source.
INPUT LABEL You can set a label for each input source when it's not in use. OPTION Move Enter Menu Language : English Audio Language : English Input Label AV1 AV F G RGB-PC HDMI1 Simple Manual RGB-PC HDMI1 HDMI2 Caption : Off HDMI HDMI2 HDMI3 Set ID :1 Key Lock : Off AV F G Close Close Close 19/22LH20 26/32/37/42LH20, 19/22LU55 32/37/42/47LH30, 26LU55, 32/37/42/47LF11 E With using OPTION menu With using INPUT button 1 1 Select O P T I O N.
WATCHING TV / CHANNEL CONTROL AV MODE AV Mode toggles through preset Video and Audio settings. Off Cinema Game Sport ■ ■ WATCHING TV / CHANNEL CONTROL 1 AV MODE ■ Press the A V M O D E button repeatedly to select the desired source. ■ 2 ■ ENTER ■ C i n e m a” in AV mode, If you select “C C i n e m a will be selected both for “PICTURE menu - Picture Mode” and “AUDIO menu - Sound Mode” respectively.
KEY LOCK The TV can be set up so that it can only be used with the remote control. This feature can be used to prevent unauthorized viewing by locking out the front panel controls. This TV is programmed to remember which option it was last set to even if you turn the TV off.
WATCHING TV / CHANNEL CONTROL SIMPLINK allows you to control and play other AV devices connected with HDMI cable without additional cables and settings. This TV may work with devices with HDMI-CEC support, but only devices with the logo are fully supported. SIMPLINK can be turned on and off in the user menus.
SIMPLINK Functions D i r e c t P l a y : After connecting AV devices to the TV, you can directly control the devices and play media without additional settings. ■ S e l e c t A V d e v i c e : Enables you to select one of the AV devices connected to TV. ■ D i s c p l a y b a c k : Control connected AV devices by pressing the , ENTER, G, A, l l, FF and GG buttons. ■ P o w e r o f f a l l d e v i c e s : When you power off the TV, all connected devices are turned off.
PARENTAL CONTROL / RATINGS DOWNLOADABLE RATING This function is available only for digital channels. This function operates only when TV has received Region5 Rating data.
EXTERNAL INPUT BLOCKING Enables you to block an input. LOCK Move Lock System Enter : Off AV1 Set Password AV Block Channel Movie Rating TV Rating-Children TV Rating-General Downloadable Rating Input Block AV F Off Component Off RGB-PC Off HDMI Off Close 19/22LH20 1 ENTER MENU 1 2 3 4 5 6 7 8 9 Input the password. Select I n p u t B l o c k.
MODELS 22LU55 (22LU55-UB) 26LU55 (26LU55-UB) Dimensions (Width x Height x Depth) With stand 18.1 x 14.6 x 7.1 inches 20.8 x 16.4 x 7.7 inches 26.2 x 21.1 x 9.2 inches 462.0 x 373.0 x 182.0 mm 529.1 x 416.6 x 196.0 mm 668.0 x 538.3 x 236.0 mm Without stand 18.1 x 12.0 x 2.5 inches 462.0 x 305.0 x 65.0 mm 20.8 x 13.4 x 2.5 inches 529.1 x 342.3 x 65.0 mm 26.2 x 17.9 x 3.1 inches 668.0 x 456.0 x 81.0 mm Weight With stand Without stand 9.7 lbs / 4.4 kg 8.1 lbs / 3.7 kg 11.9 lbs / 5.4 kg 10.
APPENDIX EXTERNAL CONTROL THROUGH RS-232C The RS-232C port allows you connect the RS-232C input jack to an external control device (such as a computer or an A/V control system) to control the TV’s functions externally. ■ Note: RS-232C on this unit is intended to be used with third party RS-232C control hardware and software. The instructions below are provided to help with programming software or to test functionality using telenet software. RS-232C Setup i.
Regulatory Information cont. FCC Compliance Statement respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada. This equipment has been tested and found to comply within the limits of a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. NOTICE The regulations are applied only to the products with the ID LABEL indicating specific requirements.
Regulatory Information cont. Why do we have environmentally labelled computers? In many countries, environmental labelling has become an established method for encouraging the adaptation of goods and services to the environment. With the growing manufacture and usage of electronic equipment throughout the world, there is a recognized concern for the materials and substances used by electronic products with regards to their eventual recycling and disposal.
Regulatory Information cont. • exception. Mercury is, for the time being, permitted in the back light system of flat panel monitors as there today is no commercially available alternative. TCO aims on removing this exception when a mercury free alternative is available.
Regulatory Information cont. operation worldwide. Many parts will be reused and recycled, while harmful substances and heavy metals are treated by an environmentally friendly method. If you want to find out more information about our recycling program, please contact your local LG vendor or a corporate representative of LG.
Regulatory Information cont. Italiano respetan el medio ambiente siempre teniendo en cuenta aspectos sociales, económicos y medioambientales. Informazioni per la tutela dell’ambiente La LGE. ha annunciato nel 1994 la cosiddetta 'LG Declaration for a Cleaner Environment' (Dichiarazione di LG a favore di un ambiente più pulito), un ideale che da allora funge da principio ispiratore della gestione aziendale.
Regulatory Information cont. especificamente o conceito de favorável ao ambiente. Reduzimos os materiais perigosos contidos em nossos produtos. Por exemplo, não há cádmio em nossos monitores. Informatie met betrekking tot recycling Deze monitor bevat materialen die schadelijk zouden kunnen zijn voor het milieu. Het is belangrijk dat deze monitor aan het einde van zijn levensduur wordt gerecycled. Informações relacionadas à reciclagem Este monitor pode conter peças que podem representar riscos ao ambiente.
Regulatory Information cont. ÕÂÓ·ıÓ‰ËÏÓ ÛÚËÎËÁËÓ‚‡Ú¸ ÏÓÌËÚÓ ÔÓÒΠËÒÔÓθÁÓ‚‡Ìˡ. KÓÔÓ‡ˆËˇ LGE Ô‡·‡Ú˚‚‡ÂÚ ‚Ò ·‡ÍÓ‚‡ÌÌ˚ ÏÓÌËÚÓ˚ Ò ÔÓÏÓ˘¸˛ ˝ÍÓÎӄ˘ÂÒÍË ÔËÂÏÎÂÏÓ„Ó ÏÂÚÓ‰‡ ÛÚËÎËÁ‡ˆËË ÓÚıÓ‰Ó‚. œÓ ‚ÒÂÏÛ ÏËÛ ‰ÂÈÒÚ‚Û˛Ú ÒËÒÚÂÏ˚ ÛÚËÎËÁ‡ˆËË ÓÚıÓ‰Ó‚ Ë ‚ÓÁ‚‡Ú‡ ËÒÔÓθÁÓ‚‡ÌÌÓÈ ÔÓ‰Û͈ËË. ÃÌÓ„Ë ÍÓÏÔÓÌÂÌÚ˚ ·Û‰ÛÚ ‚ÚÓ˘ÌÓ ËÒÔÓθÁÓ‚‡Ì˚ Ë ÛÚËÎËÁËÓ‚‡Ì˚, ‚ ÚÓ ‚ÂÏˇ Í‡Í ‚‰Ì˚ ‚¢ÂÒÚ‚‡ Ë ÚˇÊÂÎ˚ ÏÂÚ‡ÎÎ˚ ·Û‰ÛÚ Ó·‡·ÓÚ‡Ì˚ Ò ÔÓÏÓ˘¸˛ ˝ÍÓÎӄ˘ÂÒÍË ÔËÂÏÎÂÏÓ„Ó ÏÂÚÓ‰‡.
Regulatory Information cont. WEEE un bidone della spazzatura barrato da una croce significa che il prodotto è coperto dalla direttiva europea 2002/96/EC. 2.Tutti i prodotti elettrici ed elettronici dovrebbero essere smaltiti separatamente rispetto alla raccolta differenziata municipale, mediante impianti di raccolta specifici designati dal governo o dalle autorità locali. 3.
Regulatory Information cont. 4.Wilt u meer informatie over de verwijdering van uw oude toestel? Neem dan contact op met uw gemeente, de afvalophaaldienst of de winkel waar u het product hebt gekocht. eller de lokale myndigheder. 3.Korrekt bortskaffelse af dit gamle apparat er med til at forhindre mulige skadevirkninger på miljøet og menneskelig sundhed. 4.
Regulatory Information cont.
Regulatory Information cont.
