Set by program Zoom 1 Selects the proper picture proportion to match the source’s image. Choose Zoom 1 when you want to view the picture without any alteration. However, the top and bottom portions of the picture will be cropped. (4:3 19/22LG3** (16:9 16:9) 4:3) 26LG3** (16:9 16:9) Zoom 2 4:3 Choose 4:3 when you want to view a picture with an original 4:3 aspect ratio. PICTURE CONTROL Choose Zoom 2 when you want the picture to be altered, both vertically extended and cropped.
PICTURE CONTROL PRESET PICTURE SETTINGS Picture Mode - Preset There are factory presets for picture settings available in the user menus. You can use a preset, change each setting manually. Q.Menu Aspect Ratio 16:9 3 Backlight PICTURE CONTROL Picture Mode F Sound Mode Vivid Standard Cinema English Multi Audio Sleep Timer Off Del/Add/Fav Add Game Sport Close 1PICTURE Select V i v i d, S t a n d a r d, C i n e m a, S p o r t, or G a m e.
Color Tone - Preset Choose one of three automatic color adjustments. Set to warm to enhance hotter colors such as red, or set to cool to see less intense colors with more blue.
PICTURE CONTROL MANUAL PICTURE ADJUSTMENT Picture Mode - User Mode Adjust the picture appearance to suit your preference and viewing situations. PICTURE Move Enter Aspect Ratio : 16:9 Picture Mode : Standard • Brightness 50 • Sharpness 60 • Color 60 • Tint 0 • Backlight E R 1 2 3 Select P I C T U R E. ENTER Select P i c t u r e M o d e. ENTER Select V i v i d, S t a n d a r d, C i n e m a, S p o r t, or G a m e.
PICTURE IMPROVEMENT TECHNOLOGY Fresh Contrast: Optimizes the contrast automatically according to the brightness of the reflection. Fresh Color: Adjusts the color of the reflection automatically to reproduce as close as possible natural colors. Noise Reduction: Removes interference up to the point where it does not damage the original picture. Gamma: High gamma values display whitish images and low gamma values display high contrast images.
PICTURE CONTROL ADVANCED CONTROL - BLACK (DARKNESS) LEVEL Adjusting the contrast and the brightness of the screen using the black level of the screen. This feature is disable in DTV and RGB-PC mode.
ADVANCED CONTROL - EYE CARE - Only 26LG3** Dims extremely bright pictures. P i c t u r e M o d e - V i v i d, C i n e m a”.
PICTURE CONTROL ADVANCED CONTROL - REAL CINEMA Set up the TV for the best picture appearance for viewing movies. When you operate Real Cinema (3:2 Pull-Down Mode or Cinema Correction Mode), the TV will adjust 24 fps video from movies to 30 fps video for display. This feature operates only in TV (Analog TV/CATV, Digital DTV/CADTV), AV1, AV2, Component 480i/1080i, and HDMI 1080i mode.
PICTURE RESET Settings of the selected picture modes return to the default factory settings. PICTURE Move Enter PICTURE Move E E 50 • Contrast 50 • Brightness 50 • Brightness 50 • Sharpness 50 • Sharpness 50 • Color 50 • Color 50 0 R • Tint G 0 R i Resetting video configuration... • Advanced Control G • Advanced Control • Reset Screen (RGB-PC) 1 MENU 2 ENTER • Reset Screen (RGB-PC) PICTURE CONTROL • Contrast • Tint Enter Select P I C T U R E. Select R e s e t.
PICTURE CONTROL POWER INDICATOR - Only 26LG3** OPTION Language Move Enter : English Input Label OPTION Input Label : Off Key Lock : Off Caption : Off Caption : Off Set ID :1 Set ID :1 Initial Setting Enter : English Key Lock Power Indicator Power Indicator : Home Initial Setting Standby Light : Home F On G On PICTURE CONTROL Power Light Close 1 MENU 2 Select O P T I O N. ENTER Select P o w e r I n d i c a t o r.
SOUND & LANGUAGE CONTROL AUTO VOLUME LEVELER (AUTO VOLUME) - Only 26LG3** Auto Volume makes sure that the volume level remains consistent whether you are watching a commercial or a regular TV program. AUDIO Move Auto Volume Balance AUDIO Auto Volume 0 Sound Mode Enter : On L R : Standard Balance Sound Mode MENU 50 • Treble 50 50 • Bass 50 2 ENTER Select A U D I O. Select A u t o V o l u m e.
SOUND & LANGUAGE CONTROL PRESET SOUND SETTINGS (SOUND MODE) Sound Mode lets you enjoy the best sound without any special adjustment as the TV sets the appropriate sound options based on the program content. S t a n d a r d, M u s i c, C i n e m a, S p o r t, and G a m e are preset for optimum sound quality at the factory and are not adjustable. Q.
SOUND SETTING ADJUSTMENT - USER MODE Adjust the sound to suit your taste and room situations. Auto Volume Move AUDIO Auto Volume 0 L R : Standard Balance Sound Mode 1 MENU 50 • Treble 50 • Bass 50 • Bass 50 3 : On L Treble R50 Bass 50 Close • Reset TV Speaker : On Select A U D I O. ENTER Select S o u n d M o d e. ENTER Select S t a n d a r d, M u s i c, C i n e m a, S p o r t, or G a m e. ENTER Select T r e b l e or B a s s.
SOUND & LANGUAGE CONTROL BALANCE Adjust the left/right sound of speaker to suit your taste and room situations. Move Auto Volume : On AUDIO Auto Volume 0 L R : Standard Sound Mode SOUND & LANGUAGE CONTROL 1 MENU 2 ENTER 50 • Treble 50 • Bass 50 • Bass 50 Select A U D I O. Select B a l a n c e. 3 ENTER Make appropriate adjustments. 4 64 0 RETURN Return to the previous menu. MENU Return to TV viewing.
TV SPEAKERS ON/OFF SETUP - Only 26LG3** Turn the TV speakers off if using external audio equipment. AUDIO Auto Volume Move Balance Sound Mode Enter : On AUDIO Auto Volume 0 L : Standard R Balance Sound Mode 0 50 • Treble 50 • Bass 50 • Bass 50 : On Enter L R : Standard • Treble • Reset TV Speaker Move : On • Reset TV Speaker : On Off On MENU 2 Select A U D I O. ENTER Select T V S p e a k e r. ENTER Select O n or O f f.
SOUND & LANGUAGE CONTROL AUDIO RESET Settings of the selected Sound Mode return to the default factory settings. AUDIO Move Auto Volume Balance AUDIO Auto Volume 0 Sound Mode Enter : On L : Standard R Balance Sound Mode SOUND & LANGUAGE CONTROL 1 MENU 2 ENTER 50 • Treble 50 50 • Bass 50 Select A U D I O. Select R e s e t. 3 ENTER Initialize the adjusted value. 4 MENU 66 0 • Bass : On Return to TV viewing.
STEREO/SAP BROADCAST SETUP For Analog only: This TV can receive MTS stereo programs and any SAP (Secondary Audio Program) that accompanies the stereo program if the station transmits an additional sound signal. Mono sound is automatically used if the broadcast is only in Mono. Q.Menu Aspect Ratio 16:9 3 Backlight Picture Mode Vivid Sound Mode Standard Off Caption Multi Audio CH F English Sleep Timer Off Del/Add/Fav Add G Analog TV 1 Q.MENU Digital TV Select S A P. 1 Q.
SOUND & LANGUAGE CONTROL AUDIO LANGUAGE Other languages may be available if a digital signal is provided by the broadcasting station. This feature operates only in DTV/CADTV mode. OPTION Language Move Enter : English Input Label SOUND & LANGUAGE CONTROL 2 Key Lock : Off Caption : Off Caption : Off Set ID :1 Set ID :1 Power Indicator : Home Select O P T I O N. Select L a n g u a g e. ENTER Select A u d i o.
ON-SCREEN MENUS LANGUAGE SELECTION The menus can be shown on the screen in the selected language. OPTION Language Move Enter : English Input Label Input Label Key Lock : Off Caption : Off Caption : Off Set ID :1 Set ID :1 Audio F English G English Close Power Indicator : Home Select O P T I O N. ENTER Select L a n g u a g e. ENTER Select M e n u.
SOUND & LANGUAGE CONTROL CAPTION MODE Caption must be provided to help people with hearing loss watch TV. 1 CC ■ Select Caption O n or O f f. When selecting O f f, Sub-menus for Analog, DTV, and Digital Option become disabled. Analog Broadcasting System Captions SOUND & LANGUAGE CONTROL Caption must be provided to help people with hearing loss watch TV. Select a caption mode for displaying captioning information if provided on a program.
Digital Broadcasting System Captions Choose the language you want the DTV/CADTV Captions to appear in. Other Languages can be chosen for digital sources only if they are included on the program. This function in only available when Caption Mode is set On.
SOUND & LANGUAGE CONTROL Caption Option Customize the DTV/CADTV captions that appear on your screen. This function in only available when Caption Mode is set On.
TIME SETTING CLOCK SETTING Auto Clock Setup The time is set automatically from a digital channel signal. The digital channel signal includes information for the current time provided by the broadcasting station. Set the clock manually if the current time is set incorrectly by the auto clock function.
TIME SETTING Manual Clock Setup If the current time setting is wrong, reset the clock manually. TIME Move Enter TIME Move Enter Clock : Feb/21/2008 2:10 AM Clock : Feb/21/2008 2:10 AM F Off Time : Off Off Time : Off On Time : Off On Time : Off Sleep Timer : Off Sleep Timer : Off Auto Sleep : Off Auto Sleep : Off Manual Year Month 2 Date 21 Hour 2 AM Minute 10 Eastern Time Zone Daylight Saving Auto Close TIME SETTING 1 MENU 2 Select T I M E. ENTER Select C l o c k.
AUTO ON/OFF TIME SETTING This function operates only if the current time has been set. The O f f T i m e function overrides the O n T i m e function if they are both set to the same time. The TV must be in standby mode for the O n T i m e to work. If you do not press any button within 2 hours after the TV turns on with the O n T i m e function, the TV will automatically revert to standby mode.
TIME SETTING SLEEP TIMER SETTING The Sleep Time turns the TV off at the preset time. Note that this setting is cleared when the TV is turned off. TIME Enter TIME : Feb/21/2008 2:10 AM Clock Off Time : Off Off Time : Off On Time : Off On Time : Off Clock Move Move Enter : Feb/21/2008 2:10 AM Sleep Timer : Off Sleep Timer : Off Auto Sleep : Off Auto Sleep : Off F Off G Close 1 MENU TIME SETTING 2 ENTER 3 ENTER Select T I M E. Select S l e e p T i m e r.
AUTO SHUT-OFF SETTING TV will be automatically turned off, in case of no signal for 10 minutes. TIME Enter TIME : Feb/21/2008 2:10 AM Clock Off Time : Off Off Time : Off On Time : Off On Time : Off Clock Move Move Enter : Feb/21/2008 2:10 AM Sleep Timer : Off Sleep Timer : Off Auto Sleep : Off Auto Sleep : On Off On TV will be automatically turned off, in case of No Signal for 10 minutes. 1 MENU ENTER Select A u t o S l e e p. 3 ENTER Select O n or O f f.
PARENTAL CONTROL / RATINGS Parental Control can be used to block specific channels, ratings and other viewing sources. The Parental Control Function (V-Chip) is used to block program viewing based on the ratings sent by the broadcasting station. The default setting is to allow all programs to be viewed. Viewing can be blocked by choosing the type of the program and the categories. It is also possible to block all program viewing for a time period. To use this function, the following must be done : 1.
Lock System Enables or disables the blocking scheme you set up previously. LOCK Move Lock System 1 MENU 2 2 3 4 5 6 7 8 9 LOCK Move Lock System : On Set Password Set Password Block Channel Block Channel Movie Rating Movie Rating TV Rating-Children TV Rating-Children TV Rating-General TV Rating-General Downloadable Rating Downloadable Rating Input Block Input Block ENTER Enter Off On Select L O C K. Input the password. 0 3 Select L o c k S y s t e m.
PARENTAL CONTROL / RATINGS Set Password Change the password by inputting a new password twice. LOCK Move Lock System 1 2 PARENTAL CONTROL / RATING 80 1 2 3 4 5 6 7 8 9 : Off LOCK Lock System Block Channel Block Channel Movie Rating Movie Rating TV Rating-Children TV Rating-Children TV Rating-General TV Rating-General Downloadable Rating Downloadable Rating Input Block Input Block Select L O C K. Input the password. Select S e t p a s s w o r d.
CHANNEL BLOCKING Blocks any channels that you do not want to watch or that you do not want your children to watch. LOCK Move Lock System Enter : Off Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Downloadable Rating Input Block Block/Unblock 1 MENU 1 2 3 4 5 6 7 8 9 Input the password. Select B l o c k C h a n n e l. 4 ENTER Select a channel to block or unblock it. 5 ENTER MENU Previous RETURN Exit Select L O C K.
PARENTAL CONTROL / RATINGS MOVIE & TV RATING Movie Rating (MPAA) - Only for USA Blocks movies according to the movie ratings limits specified, so children cannot view certain movies. You can set the ratings limit by blocking out all the movies with the ratings above a specified level. Keep in mind that the movie ratings limit only applies to movies shown on TV, not TV programs, such as soap operas.
TV Rating Children - Only for USA Prevents children from watching certain children's TV programs, according to the ratings limit set. The children rating does not apply to other TV programs. Unless you block certain TV programs intended for mature audiences in the TV Rating - sub menu, your children can view those programs.
PARENTAL CONTROL / RATINGS TV Rating General - Only for USA Based on the ratings, blocks certain TV programs that you and your family do not want to view.
TV Rating English - Only for CANADA Selecting canadian english language rating system. LOCK Move Enter Blocking off : Permits all programs LOCK Move Enter E Lock System : Off Lock System : Off Set Password Set Password Block Channel Block Channel TV Rating-English TV Rating-English TV Rating-French TV Rating-French Downloadable Rating Downloadable Rating Input Block Input Block C C8+ G PG 14+ 18+ Blocking Off 1 MENU 2 2 3 4 5 6 7 8 9 Select L O C K. ■ Input the password.
PARENTAL CONTROL / RATINGS TV Rating French - Only for CANADA Selecting canadian french language rating system.
DOWNLOADABLE RATING This function may become available in the future and will be available only for digital channel signal. This function operates only when TV has received Region5 Rating data.
PARENTAL CONTROL / RATINGS EXTERNAL INPUT BLOCKING Enables you to block an input.
KEY LOCK The TV can be set up so that it can only be used with the remote control. This feature can be used to prevent unauthorized viewing by locking out the front panel controls. This TV is programmed to remember which option it was last set to even if you turn the TV off. OPTION Language Move Enter : English Input Label Language : Off Key Lock : On Caption : Off Caption : Off Set ID :1 Set ID :1 Off On Power Indicator : Home Select O P T I O N. ENTER Select Key Lock.
APPENDIX TROUBLESHOOTING The operation does not work normally. Check to see if there is any object between the product and the remote control causing obstruction. Ensure you are pointing the remote control directly at the TV. ■ Ensure that the batteries are installed with correct polarity (+ to +, - to -). ■ Ensure that the correct remote operating mode is set: TV, VCR etc. ■ Install new batteries.
The audio function does not work. Press the VOL or VOLUME button. Sound muted? Press MUTE button. ■ Try another channel. The problem may be with the broadcast. ■ Are the audio cables installed properly? ■ ■ Picture OK & No sound No output from one of the speakers ■ Adjust Balance in menu option. ■ A change in ambient humidity or temperature may result in an unusual noise when the product is turned on or off and does not indicate a fault with the product.
APPENDIX MAINTENANCE Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you can enjoy your new TV. Caution: Be sure to turn the power off and unplug the power cord before you begin any cleaning. Cleaning the Screen Here’s a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until it’s almost dry, and then use it to wipe the screen.
PRODUCT SPECIFICATIONS Dimensions (Width x Height x Depth) Weight MODELS 22LG30 (22LG30-UA) 19LG30 (19LG30-UA) 22LG31 (22LG31-UB) 26LG30 (26LG30-UA/UD) 19LG31 (19LG31-UB) 22LG30DC (22LG30DC-UA) 26LG30DC(26LG30DC-UA) With stand 26.1 x 20.0 x 8.9 inches 20.5 x 16.9 x 7.4 inches 18.0 x 15.3 x 7.4 inches 458.8 x 391.0 x 189.2 mm 522.2 x 431.5 x 189.2 mm 663.3 x 508.2 x 227.
APPENDIX EXTERNAL CONTROL THROUGH RS-232C - Only 26LG30/30DC, 22LG30DC The RS-232C port allows you connect the RS-232C input jack to an external control device (such as a computer or an A/V control system) to control the TV’s functions externally. ■ Note: RS-232C on this unit is intended to be used with third party RS-232C control hardware and software. The instructions below are provided to help with programming software or to test functionality using telenet software.
RS-232C Configurations Either cable below can be used. 7-Wire Configuration (Serial female-female NULL modem cable) RXD TXD GND DTR DSR RTS CTS PC TV 2 3 5 4 6 7 8 3 2 5 6 4 8 7 D-Sub 9 D-Sub 9 3-Wire Configurations (Not standard) TXD RXD GND DSR DTR CTS RTS PC TV 2 3 5 4 6 7 8 3 2 5 6 4 7 8 D-Sub 9 D-Sub 9 RXD TXD GND DTR DSR RTS CTS TXD RXD GND DTR DSR RTS CTS Set ID Use this function to specify a TV ID number. Refer to ‘Real Data Mapping1’. G p.98.
APPENDIX Command Reference List COMMAND1 COMMAND2 01. Power 02. Input Select 03. Aspect Ratio 04. Screen Mute 05. Volume Mute 06. Volume Control 07. Contrast 08. Brightness 09. Color 10. Tint 11. Sharpness 12. OSD Select 13. Remote Control Lock Mode k x k k k k k k k k k k a b c d e f g h i j k l 00 ~ 01 (G p.97) (G p.97) 00 ~ 01 00 ~ 01 00 ~ 64 00 ~ 64 00 ~ 64 00 ~ 64 00 ~ 64 00 ~ 64 00 ~ 01 k m 00 ~ 01 COMMAND1 COMMAND2 19. Channel Tuning DATA (Hexadecimal) m a COMMAND1 COMMAND2 14.
01. Power (Command: k a) 06. Volume Control (Command: k f) To control Power On/Off of the TV. To adjust volume. Transmission [k][a][ ][Set ID][ ][Data][Cr] You can also adjust volume with the volume buttons on remote control.
APPENDIX 12. OSD Select (Command: k l) To select OSD (On Screen Display) on/off. Transmission [k][l][ ][Set ID][ ][Data][Cr] Data 00: OSD off Data 01: OSD on Acknowledgement [l][ ][Set ID][ ][OK/NG][Data][x] 18. Auto Configuration (Command: j u) To adjust picture position and minimize image shaking automatically. Auto configuration only works in RGB-PC mode. Transmission [ j ][u][ ][Set ID][ ][Data][Cr] Data 01: To set 13.
Data5: 7 Main/Sub Picture 6 Two/One Part Channel 5 Using Physical Channel 4 3 2 1 0 Step NTSC Air NTSC Cable ATSC Air ATSC Cable_std ATSC Cable_hrc ATSC Cable_irc ATSC cable_auto Reserved ... Reserved Reserved 0 Main 0 Two 0 Use x 0 0 0 0 1 Sub 1 One 1 No Use x 0 0 0 1 x 0 0 1 0 x 0 0 1 1 x 0 1 0 0 x 0 1 0 1 x 0 1 1 0 x 0 1 1 1 x x x x x x 1 1 1 1 The table above lists the binary code which must be converted to Hexadecimal before sending.
APPENDIX OPEN SOURCE LICENSE - This feature is not available for all models. GNU GENERAL PUBLIC LICENSE Version 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. the program proprietary. To prevent this, we have made it clear that any patent must be licensed for everyone's free use or not licensed at all.
b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the Program or any part there of, to be licensed as a whole at no charge to all third parties under the terms of this license.
APPENDIX 7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this license, they do not excuse you from the conditions of this license.
END OF TERMS AND CONDITIONS How to apply these terms to your new programs If you develop a new program, and you want it to be of the greatest possible use to the public, the best way to achieve this is to make it free software which everyone can redistribute and change under these terms. To do so, attach the following notices to the program.
APPENDIX GNU LESSER GENERAL PUBLIC LICENSE Version 2.1, February 1999 Copyright (C) 1991, 1999 Free Software Foundation, Inc. 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. [This is the first released version of the Lesser GPL. It also counts as the successor of the GNU Library Public License, version 2, hence the version number 2.1.
Although the Lesser General Public License is Less protective of the users' freedom, it does ensure that the user of a program that is linked with the Library has the freedom and the wherewithal to run that program using a modified version of the Library. each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this license and to the absence of any warranty; and distribute a copy of this license along with the Library.
APPENDIX 3. You may opt to apply the terms of the ordinary GNU General Public License instead of this License to a given copy of the Library. To do this, you must alter all the notices that refer to this License, so that they refer to the ordinary GNU General Public License, version 2, instead of to this License. (If a newer version than version 2 of the ordinary GNU General Public License has appeared, then you can specify that version instead if you wish.) Do not make any other change in these notices.
For an executable, the required form of the "work that uses the library" must include any data and utility programs needed for reproducing the executable from it. However, as a special exception, the materials to be distributed need not include anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies the executable.
APPENDIX If the library does not specify a license version number, you may choose any version ever published by the Free Software Foundation. 14.If you wish to incorporate parts of the library into other free programs whose distribution conditions are incompatible with these, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this.
MOZILLA PUBLIC LICENSE Version 1.1 --------------code which is described in the source code notice required by exhibit as original code, and which, at the time of its release under this license is not already covered code governed by this license. 1.Definitions. 1.0.1. “Commercial use” means distribution or otherwise making the covered code available to a third party. 1.1. “Contributor” means each entity that creates or contributes to the creation of modifications. 1.2.
APPENDIX (c) the licenses granted in this section 2.1(a) and (b) are effective on the date Initial developer first distributes original code under the terms of this license. (d) Notwithstanding section 2.1(b) above, no patent license is granted: 1) for code that You delete from the original Code; 2) separate from the original code; or 3) for infringements caused by: i) the modification of the original code or ii) the combination of the original code with other software or devices. 2.2. APPENDIX 3.
3.5. 3.7. Required notices. You must duplicate the notice in exhibit A in each file of the source code. If it is not possible to put such notice in a particular source code file due to its structure, then You must include such notice in a location (such as a relevant directory) where a user would be likely to look for such a notice. If You created one or more modification(s), you may add your name as a contributor to the notice described in exhibit A.
APPENDIX 7. DISCLAIMER OF WARRANTY. COVERED CODE IS PROVIDED UNDER THIS LICENSE ON AN “AS IS” BASIS, WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION, WARRANTIES THAT THE COVERED CODE IS FREE OF DEFECTS, MERCHANTABLE, FIT FOR A PARTICULAR PURPOSE OR NON-INFRINGING. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE COVERED CODE IS WITH YOU.
11. MISCELLANEOUS. This license represents the complete agreement concerning subject matter hereof. If any provision of this license is held to be unenforceable, such provision shall be reformed only to the extent necessary to make it enforceable. This License shall be governed by California law provisions (except to the extent applicable law, if any, provides otherwise), excluding its conflict-of-law provisions.