User's Manual

STAREX-IS BSM Manual
Page:753(877)
Issue:1.
0
SMD-011-PMA210
ALP(UCPA) is normal.( Board
deletion, CPU or FPGA Fail)
execution/R.C result.
A5511 Generated when both sides of dual
ALP(UCPA) are abnormal. ( Board
deletion, CPU or FPGA Fail)
Reinstall board upon deletion, or
check FAIL LED ON/R.C
execution/R.C result.
A5550 Generated when the other side is
abnormal while one side of dual
ALMA is normal.(board deletion,
CPU fail, SW reset, HW reset,
remote reset, power failure)
- check ALMA HW status.
- INIT LED red or OFF, ALMA
non-operation / ALMA HW check
A5551 Generated when both sides of dual
ALMA are abnormal. (board deletion,
CPU fail, SW reset, HW reset,
remote reset, power failure)
- Check ALMA HW status.
- INIT LED red or OFF, ALMA
non-operation/ ALMA HW check
A5560 Generated when the other side is
abnormal while one side of dual
ASCA is normal.(board deletion, CPU
fail, SW reset, HW reset, remote
reset, power failure)
- Check ASCA HW status.
- INIT LED red or OFF, ASIA-E
non-operation/ Check ASCA HW.
A5561 Generated when both sides of dual
ASCA are abnormal. (board deletion,
CPU fail, SW reset, HW reset,
remote reset, power failure)
- Check ASCA HW status.
- INIT LED red or OFF, ASIA-E
non-operation/ ASCA HW check
A5700 Generated when the other side is
abnormal while one side of dual
CCP(UCPA) is normal.( Board
deletion, CPU or FPGA Fail)
Reinstall board upon deletion, or
check FAIL LED ON/R.C
execution/R.C result.
A5701
(BSC)
Generated when both sides of dual
CCP(UCPA) are abnormal. ( Board
deletion, CPU or FPGA Fail)
Reinstall board upon deletion, or
check FAIL LED ON/R.C
execution/R.C result.
A5710
(BSC)
Generated when the other side is
abnormal while one side of dual
CCP(UCPA) is normal.( Board
deletion, CPU or FPGA Fail)
Reinstall board upon deletion, or
check FAIL LED ON/R.C
execution/R.C result.
A5711
(BSC)
Generated when both sides of dual
CCP(UCPA) are abnormal. ( Board
Reinstall board upon deletion, or
check FAIL LED ON/R.C