User's Manual

STAREX-IS BSM Manual
Page:761(877)
Issue:1.
0
SMD-011-PMA210
between FERA and FETA of the
other side.
replace FERA, FETA.
A8840
(CAN)
Failure in link between FETA and
PDSN
Check the link between FETA and
PDSN, and if normally connected,
replace FETA.
A9000
(CAN)
One side failure of dual PRI board of
CAMB.
Check up power and replace that if
abnormal.
A9001
(CAN)
Both side failure of dual PRI board of
CAMB.
Check up power and replace that if
abnormal.
A9010
(CAN)
One side failure of dual PRI board of
PCFB(PCP included Shelf).
Check up power and replace that if
abnormal.
A9011
(CAN)
Both side failure of dual PRI board of
PCFB(PCP included Shelf).
Check up power and replace that if
abnormal.
A9020
(CAN)
One side failure of dual PRI board of
PCFB(PMP included Shelf).
Check up power and replace that if
abnormal.
A9021
(CAN)
Both side failure of dual PRI board of
PCFB(PMP included Shelf).
Check up power and replace that if
abnormal.
A9040
(CAN)
One side failure of dual PRI board of
CPNB.
Check up power and replace that if
abnormal.
A9041
(CAN)
One side failure of dual PRI board of
CPNB.
Check up power and replace that if
abnormal.
A9220
(CAN)
Generated when the other side is
abnormal while one side of dual
ASIA in CAMB is normal. (board
deletion, CPU fail, SW reset, HW
reset, remote reset, power failure)
- Check ASIA HW status.
- INIT LED red or OFF, ASIA HW
check
A9221
(CAN)
Bothy sides of dual ASIA in CAMB
are abnormal. (board deletion, CPU
fail, SW reset, HW reset, remote
reset, power failure)
- Check ASIA HW status.
- INIT LED red or OFF, ASIA HW
check
A9230
(CAN)
When the other side is abnormal
while one side of dual ASIA is
normal.(board deletion, CPU fail, SW
reset, HW reset, remote reset,
power failure)
- Check ASIA HW status.
- INIT LED red or OFF, ASIA HW
check
A9231 Both sides of dual ASIA are - Check ASIA HW status.