User's Manual

STAREX-IS BSM Manual
Page:780(877)
Issue:1.
0
SMD-011-PMA210
DCI_CON>> history
### Command History ###
9 :
8 : ls
7 : asf a01
6 : arf a03 11400101
5 : arf off
4 : rsock
3 : ipclog
2 : isig
1 : status
0 : ls
DCI_CON>> !2
isig
### Initial Signal ID Information ###
[#2690] SID(0x0A82) / QKey(0x0207) / PID(00792)
[#2691] SID(0x0A83) / QKey(0x0208) / PID(00798)
…
7.3.4.5. display command
By display command, you can change the address to display ipclog window. When using
DCI console for remote host other than workstation that activates BSM, upon use of
ipclog, you should use display command in advance to change the value of $DISPLAY
environmental variable. Set IP address of the host for display in the form of
display 150.150.62.71.