User's Manual

STAREX-IS BSM Manual
Page:794(877)
Issue:1.
0
SMD-011-PMA210
12(2), LINK_TYPE_STM14(3), LINK_TYPE_E1(4),
LINK_TYPE_T1(5))
byte link_status 1 ATM Link Acktivity Init/Active/Block
(LINK_STS_NONE(0), LINK_STS_ACTIVE(1),
LINK_STS_ONL_BLOCK(2), LINK_STS_MMC_BLOCK(3))
byte connect_type Node Connection ID: End-User’s own ID (see
Appendix Connection ID)
byte fabric_no Switch Fabric No.
(0: ASCA APC0,1: ASIA0 APC0,2: ASIA0 APC1,
3: ASIA1 APC0, 4: ASIA1 APC1, 5: ASIA2 APC0,
6: ASIA2 APC1, 7: ASIA3 APC0, 8: ASIA3 APC1)
byte reserved[7]
7.5.2.2. St_re_can_addr.dg
Table 7.5-3 St_re_can_addr
Type N a m e Default Remarks
byte shelf_id key full equip (MAX_CAN_SHELF: 4)
byte slot_id key full equip (MAX_CAN_SLOT: 22)
byte equip ‘0’
byte bd_type PBA’s own number (not yet set)
byte no_sub Sub Processor Number in case of Sub
processor had IP
byte reserved
word32 addr[MAX_SUB] MAX_SUB: 8
7.5.2.3. St_re_can_pvc.dg
Table 7.5-4 St_re_can_pvc
Type N a m e Default Remarks
byte dummy key
word16 no_entry # of Valid Entries, number of defined PVC
information (~4096)
word16 reserved