User's Manual

STAREX-IS BSM Manual
Page:809(877)
Issue:1.
0
SMD-011-PMA210
word16 state_chg_thresh 250 Number of consecutive good frames brings
about good run state.(0 ~ 10000)
word16 erase_meas_frames 250 Cumulative erasure measuring period.(0 ~
65535)
byte cont_erase_eftv 2 Number of consecutive erasures brings about
tx gain increase. If 0, burst erasures have
no effect.(0 ~ 127)
byte cumul_erase_eftv 4 Number of cumulative erasures brings about
tx gain increase. If 0, non-burst erasures
have no effect.(0 ~ 127)
byte nominal_gain 50 Nominal tx gain of primary/secondary
traffic.(0 ~ 127)
byte max_tx_gain 100 Max.tx gain of primary/secondary traffic. (0
~ 127)
byte min_tx_gain 40 Min.tx gain of primary/secondary traffic. (0
~ 127)
byte gain_down_delta 1 Gain decrease delta (0 ~ 127)
byte big_up_delta 10 Gain increase delta. Applied when a gain-up
condition is encountered during ERASURE-
STATE. (0 ~ 100)
byte small_up_delta 5 Gain increase delta. Applied when a gain-up
condition is encountered during GOOD-STATE.
(0 ~ 100)
byte signal_delta_gain 96 Gain scaling factor of signaling traffic. (0
~ 200)
byte pcsc_delta_gain1 64 Gain scaling factor of PCSC bit.(1-cell)
(0 ~ 200)
byte pcsc_delta_gain2 96 Gain scaling factor of PCSC bit.(2-cell)
(0 ~ 200)
byte pcsc_delta_gain3 112 Gain scaling factor of PCSC bit.(3-cell)
(0 ~ 200)
byte reserved_byte[32] 0
7.5.5.3. St_revpwr_data_type.dg
Table 7.5-26 St_revpwr_data_type