User's Manual

STAREX-IS BSM Manual
Page:817(877)
Issue:1.
0
SMD-011-PMA210
Type N a m e default Remarks
byte bts_id full
byte sector_id full
byte action_time_frame
After set Action time, frame unit
duration until first PUF probe. Before
PUF pulse transfer, duration sent with
nominal power
byte puf_setup_size
power control group unit.
byte puf_pulse_size
Duration that MS sends PUF pulse. Power
control group unit.
word16 puf_interval Interval between PUF Probes. frame unit
byte puf_init_pwr Initial PUF Probe power. in units of dB
byte puf_pwr_step PUF pulse power increase. in units of dB
byte total_puf_probes Total PUF prove number
byte max_pwr_puf
Max. PUF Probe number that can be
transmitted with max. Tx power
byte reserved_byte[33] 0
7.5.5.13. St_pwr_cntl_para_type
Table 7.5-36 St_pwr_cntl_para_type
Type N a m e default Remarks
byte bts_id full
byte fer_id 0 ~ 30
byte pwr_cntl_step
step size of forward link closed
loop power control
byte fpc_mode 0
operation mode of forward link
closed loop power control
It should be the same as
fpc_punc_mode of
St_Chip_pwr_cntl_para_data.
byte fpc_fch_init_setpt
initial Value of Forward
Fundamental Channel Outer Loop
Eb/Nt setpoint (hereinafter