User's Manual

STAREX-IS BSM Manual
Page:842(877)
Issue:1.
0
SMD-011-PMA210
to next initial alignment command
word16 T22 240(sec) Local inhibit test timer3-6 minutes
word16 T23 240(sec) Remote inhibit test timer3-6 minutes
word16 SLTackT 5(sec) Time to wait for signal link test answer, with
range of 4sec~12sec
byte reserved[2
0]
0
7.5.7.5. St_SCCP_timer.dg
Table 7.5-71 St_SCCP_timer
Type N a m e default Remarks
byte dummy 0 key
word16 T_conne_est 20(sec) 1-2 minutes to wait connection confirm
word16 T_ias 300(sec) Delay time of 5-10 minutes used to conduct
inactivity test on connection section
word16 T_iar 660(sec) Waiting time of 11-21 minutes to receive
message on connection section
byte T_rel 10(sec) Waiting time of 10-20 sec to receive release
complete message
word16 T_int 10(sec)
1. although implemented in source, it is not
used.
2. upon connection release, it is the time to
freeze corresponding LRN for a certain time
to prevent the use of the same LRN
Extending to 1 minutes
word16 T_stat_info 30(sec) Interval that requests Subsystem status
information
Increasing value, 5-10 sec ~ 10-20 min
byte reserve[20] 0
7.5.8. CCP/BSP COMMON
7.5.8.1. St_bts_data_type.dg
Table 7.5-72 St_bts_data_type