User's Manual

STAREX-IS BSM Manual
Page:856(877)
Issue:1.
0
SMD-011-PMA210
word16 nghbr_freq[] If freq_incl field is set to ‘1’
this field to the CDMA channel Number
freq_incl field is set to ‘0’ disregarded
byte timing_incl[] B : MS moves at 2FA -> 5FA
B is the value on 3,4,5FA. It is held by 5FA
BS.
If each Nghbr Sector transmits pilot in DTX
mode, it indicates timing information.
byte nghbr_tx_offset[] Transmission start offset value of each nghbr
sector
byte nghbr_tx_duration
[]
Pilot Transmission time value of each Nghbr
Sector
byte nghbr_tx_period[] Pilot DTX cycle value of each Nghbr Sector.
byte srch_set[] To indicate the status of each Nghbr Pilot.
byte add_pilot_rec_inc
l []
Indicates the status of additinal record
regarding each Nghbr Pilot.
byte nghbr_pilot_rec_t
ype []
Additional Record Type(Information Type)
Identification of each Nghbr Pilot
byte td_pilot_otd_pwr[
]
OTD Transmit Power Level of each Nghbr Pilot
byte srch_offset_nghbr
[]
Search Window offset value regarding each
Neighbor Pilot
byte access_entry_ho[
]
Should be repeated as many as NGHBR_SET_SIZE.
Access entry handoff permitted when entering
the System Access State.
If before MS receives message through Paging
Channel in idle state, and for response, it
transits to System Access State, BS sets this
field to 1 or not it sets that to 0 if access
entry handoff is allowed.
The order of ACCESS_ENTRY_HO is the same as
that of Neighbor List Message, Extended
Neighbor List Message or General Neighbor List
Message.
byte access_ho_allowe
d[]
Should be repeated as many as NGHBR_SET_SIZE.
Access handoff and access probe handoff