User's Manual

STAREX-IS BSM Manual
Page:857(877)
Issue:1.
0
SMD-011-PMA210
permitted for the corresponding pilot while in
the System Access State.
If MS is in System Access State, BS sets this
field to 1 or not it sets that to 0 if MS
access handoff or access probe handoff is
allowed.
The order of ACCESS_HO_ALLOWED is the same as
that of Neighbor List Message, Extended
Neighbor List Message or General Neighbor List
Message.
byte reserved_byte[34] 0
7.5.8.7. St_Qos_param_data
Table 7.5-78 St_Qos_param_data
Type N a m e default Remarks
byte bts_id full
byte max_sch_rate
byte reserved_byte[106] 72 + 34
7.5.9. BSP Layer
7.5.9.1. St_pwr_mgt_param_type.dg
Table 7.5-79 St_pwr_mgt_param_type
Type N a m e default Remarks
byte sector_id full Sector Identification (0 ~ 2)
byte cdmach_id full CDMA Channel Identification(0 ~ 7)
byte T_rx_filter 0 Received total power filter update rate.
Ms units, 1/2 step, 20/2 ~ 255 range
byte G_rx_filter 0 Received total power filter delay
contant.
1/256 step. 0/256 ~ 255/256 range
byte G_tx_filter 0 Transmit power filter delay constant
1/256 step. 0/256 ~ 255/256 range