User's Manual Part 1

STAREX-IS BSM Manual
Page:150(877)
Issue:1.
0
SMD-011-PMA210
MAINTAIN ]
e : Block Name [ String ]
 Input : ACT-BLK:BSC=1,PROC=CCP,FLASH=UPDATE,BLK=ccp_cal;
 Output :
Fig. 4.2-2 Activation Loading Performance Result
4.2.1.3. Flash Memory Update (UPD-FLS)
The command to update Flash memory is used to designate memory update as
MAINTAIN in the block loading and activation loading and then to record the following:
1) the blocks that are downloaded as a result of the block loading and 2) activation
loading command results in the Flash Memory.
 Command : UPD-FLS:[BSC=a,][BTS=b,]PROC=c ;
a : BSC ID [ Number 0~11 ]
b : BTS ID [ Number 0~47 ]
c : Processor Name [ CNP, PNP, PCP0, PCP1, PCP2, PMP0,
PMP1, PMP2, NCP, CCP, SCP, BSP,
ALP ]
 Input : UPD-FLS:BSC=1,PROC=CCP;
 Output :