User's Manual Part 1

STAREX-IS BSM Manual
Page:163(877)
Issue:1.
0
SMD-011-PMA210
4.3. Configuration Command
During the initialization, BTS and BSC download PDL (Programmable Loading Data)
that contain the configuration and parameter information as well as the OS and
Application.
This section describes the commands that help the user to manage the following
efficiently and variably by displaying PLD and changing them online: BTS and BSC
configuration, the parameter information, and the network configuration information. In
particular, the system’s flexibility is maximized by enabling BTS, Sector, FA, etc to be
expanded by the parameter input by the user without any additional data.
4.3.1. Parameter Information Display Command
(Display_Parameter_Information_1)
As a command that is used to inquire the parameter information that is currently stored
in the PLD, its results are displayed on the OUTPUT WINDOW.
Table 1-1 Parameter Information Display Command I
DIS-BTS-DATA BSC, BTS BTS DATA verification
DIS-SECT-DATA BSC, BTS, SECT SECTOR DATA verification
DIS-CHAN-DATA BSC, BTS, CDMACH
CDMA CHANNEL DATA
verification
DIS-SYS-PARA BSC, BTS, SECT, CDMACH SYSTEM PARAMETER verification
DIS-EXT-SYS BSC, BTS, SECT, CDMACH
EXTENDED SYSTEM
PARAMETER verification
DIS-NGBR-DATA BSC, BTS, SECT
Neighbor cell information
verification
DIS-QOS-PARA BSC, BTS QOS verification
DIS-CHIP-PWR BSC, BTS
CHIP power control parameter
verification
DIS-TIC-DATA BSC, BTS, SECT, CDMACH TIC DATA verification
DIS-SECT-CHAN BSC, BTS, SECT, CDMACH
SYSTEM SECTOR CDMA
CHANNEL PARAMETER