User's Manual Part 1

STAREX-IS BSM Manual

Page:172(877)

Issue:1.

SMD-011-PMA210

4.3.1.6. Neighbor List Parameter Information Display

Neighbor list refers to a set of the information on neighbor sectors. Each sector can

have up to 20 neighbor lists. When the MS, which is busy or idle, moves to other

sectors, it has to switch over a call (this is called Handoff or Handover). At this time,

handoff is carried out in reference to the neighbor list. The neighbor list is referred by

BTS and BSC and can be inquired by using the following command:

• Command DIS-NGBR-DATA:BSC=aa,BTS_GRP=b[,BTS_SUB=c][,SECT=c];

a : BSC Number (0 ~ 11)

b : BTS Number (0 ~ 47)

c : BTS Sub Number (0 ~ 3)

d : Sector Number (ALPHA/BETA/GAMMA)

• Input DIS-NGBR-DATA:BSC=0,BTS_GROUP=2,BTS_SUB=0;

• Output