User's Manual Part 2

STAREX-IS BSM Manual
Page:300(877)
Issue:1.
0
SMD-011-PMA210
4.3.5.12. Forward Link Power Management Information (RS2) Change
To change Forward link power management information (RS2), click CDM-
>Change_Parameter_ Information_2_2-> CHG-RS2-FWDP on the Command Window in
order. Input the value to be changed in each field as shown below.
• Command CHG-RS2-FWDP :BSC=a ,BTS=b ,FER=c [,IN_DWNT=d]
[,MAX_DWNT=e]
[,MIN_DWNT=f] [,TDWN_DLT=g] [,TUP_DLT=h] [,STT_THS=i]
[,ERA_MSR=j] [,CONT_ERA=k] [,CUMU_ERA=l] [,NOM_GAIN=m]
[,MAX_TX_GAIN=n] [,MIN_TX_GAIN=o] [,GAIN_DWN=p]
[,BIG_UP=q] [,SMALL_UP=r] [,SIGL_DLT=s] [,DLT_GAN1=t]
[,DLT_GAN2=u] [,DLT_GAN3=v];
• Input CHG-RS2-FWDP :BSC=0 ,BTS=0 ,FER=POINT_5,IN_DWNT=255;
• Output