User's Manual Part 2

STAREX-IS BSM Manual
Page:301(877)
Issue:1.
0
SMD-011-PMA210
Fig. 4.3-112 Forward Link Power Management Information (RS2) Change
4.3.5.13. Backward Link Power Management Information (RS2) Change
To change Backward link power management information (RS2), click CDM-
>Change_Parameter_ Information_2_2-> CHG-RS2-REVP on the Command Window in
order. Input the value to be changed in each field as shown below.
• Command CHG-RS2-REVP :BSC=a ,BTS=b ,FER=c [,PNOM=d] [,PMAX=e]
[,PMIN=f] [,RBUD=g] [,RSUD=h] [,RNEW=i] [,RMAXDD=j]
[,RMINDD=k] [,RDDIS=l] [,RCONTEE=m] [,RCUMULEE=n] [,REMF=o]
[,RSCT=p];
• Input CHG-RS2-REVP :BSC=0 ,BTS=0 ,FER=POINT_5,PNOM=255;
• Output