User's Manual Part 2

STAREX-IS BSM Manual
Page:317(877)
Issue:1.
0
SMD-011-PMA210
4.3.5.25. PCF PARAMETER Change
To change PCF PARAMETER, click CDM->Change_Parameter_ Information_2-> CHG-
PCF-PARA on the Command Window in order. Input the value to be changed in each
field as shown below.
• Command CHG-PCF-PARA :PCF=a [,AAA_TYPE=b] [,SID=c] [,NID=d]
[,LTM_OFF=e]
[,DAY_LT=f] [,PKZN_ID=g] [,ID_TYPE=h] [,GRE_SEQ=i] [,SEQ_TIMER=j]
[,MSID_TYPE=k];
• Input CHG-PCF-PARA :PCF=0,AAA_TYPE=255,SEQ_TIMER=255;
• Output
Fig. 4.3-125 PCF PARAMETER Change