User's Manual Part 2

STAREX-IS BSM Manual
Page:383(877)
Issue:1.
0
SMD-011-PMA210
4.4.1.5. CAN Processor H/W RESET(ISOLATION) COMMAND
Function to reset CAN Processor H/W.
Command : RMT-CAN-PRC:PROC=a,SIDE=b,CLS=c;
a: Processor Name : CNP,PNP,PCP,PMP
b: Side : A,B
c: CLASS : HARDRST,ISOLAT,UNISOL
HARDRST : Function to reset Processor on H/W Level (using Register Setting).
ISOLAT : Function to isolate Processor on H/W Level (maintaining Status of RESET)
UNISOL : Function to release the isolation
Input : RMT-CAN-PRC:PROC=PNP,SIDE=A,CLS=ISOLAT;
Fig. 4.4-5 CAN Processor H/W Command Result
4.4.1.6. BSC Processor H/W RESET(ISOLATION) COMMAND
Function to reset BSC Processor H/W.
Command : RMT-BSC-PRC:BSC=a,PROC=b,[SIDE=c],CLS=d;
a: BSC Number
b: Processor Name : CCP,NCP,SCP,ALP,SMP,VMP
c: Side : A,B
d: CLASS : HARDRST,ISOLAT,UNISOL
HARDRST : Function to RESET Processor on H/W Level (using Register Setting).
ISOLAT : Function to isolate Processor on H/W Level (RESET Status maintained)
UNISOL : Function to release isolation