User's Manual Part 2

STAREX-IS BSM Manual
Page:385(877)
Issue:1.
0
SMD-011-PMA210
4.4.1.8. Processor Switch Over(Switch) Command
Function to Switch over Processor.
Switching Over Command is executed for duplicated Processors and is performed only
when both sides of Processors are in a normal status.
Command : SWT-PRC [:BSC=a] [,BTS=b] ,PROC=c;
a: BSC Number
b: BTS Number
c: Processor Name : CNP, PNP, PCP00, PCP01,PCP02, PMP00, PMP01,PMP02,
CCP, NCP, SCP,ALP, BSP, CRP, RCP00, RCP01, RCP02, RCP03,RCP04, RCP05
Input : SWT-PRC :BSC=1 ,PROC=CCP;
Fig. 4.4-8 Processor Switch Over(Switch) Command Display Result
4.4.2. Network Status Control
Table 4.4-2 Network Node Status LIST
Status Types Definition Description
NORM Normal Normal Operation
NOR_A
Normal Act While normally operated, Act Status is
maintained (Duplicated node)
NOR_S
Normal Standby While normally operated, Standby Status is
maintained (Duplicated node)