User's Manual Part 2

STAREX-IS BSM Manual
Page:391(877)
Issue:1.
0
SMD-011-PMA210
the Vocoder test.
REDNCY In duplicated Device, it indicates Redundancy Status of Standby side(FETA
Only)
CB_OPN For device that is managed only as fault, it is the case that is opened to Fault
Cable
CLK_F During Vocoder Channel test, as a result of Timing-Module test, NOK
occurred (Test Only)
TSW_F As a result of TSLU Loopback test, NOK is occurred (Test Only)
ABN_AT Status in which Vocoder is put to Automatic(Online) test (Test Only)
ABN_MT Status in which Vocoder Manual(Ondemand) is put to test (Test Only)
QAT0_F As a result of QCELP Algorithm test during Vocoder channel test, NOK
occurred in State 0 (Test Only)
QAT1_F As a result of QCELP Algorithm test during Vocoder channel test, NOK
occurred in State 1 (Test Only))
QAT2_F As a result of QCELP Algorithm test during Vocoder channel test, NOK
occurred in State 2 (Test Only)
QAT3_F As a result of QCELP Algorithm test during Vocoder channel test, NOK
occurred in State 3 (Test Only)
VPLB_F As a result of VCPA Loopback test during Vocoder channel test, NOK
occurred (Test Only)
VMLB_F As a result of VCMA Loopback test during Vocoder channel test, NOK
occurred (Test Only)
VLLB_F As a result of VLIA Loopback test during Vocoder channel test, NOK occurred
(Test Only)
4.4.3.1. CAN Device Status Display Command
Function to display Device(BOARD) Status mounted to CAN
Command : DIS-CAN-DEV:PROC=a;
a : CNP,PNP,PCP(00~02)
Input : DIS-CAN-DEV:PROC=CNP;