User's Manual Part 2

STAREX-IS BSM Manual
Page:258(877)
Issue:1.
0
SMD-011-PMA210
4.3.4.7. EXTENDED SYSTEM PARAMETER(1) Change
To change the Extended System Parameter Message, click CDM->
Change_Parameter_Information_1-> CHG-EXT1-SYS on the Command Window in
order. If the next input window is displayed, then input the value to be changed.
• Change CHG-EXT1-SYS :BSC=a ,BTS=b ,SECT=c ,CDMACH=d [,PREF_MSID=e]
[,MCC=f] [,IMSI_11_12=g] [,TMSI_LEN=h]
[,TMSI_ZONE_1=i] [,TMSI_ZONE_2=j] [,TMSI_ZONE_3=k]
[,TMSI_ZONE_4=l] [,TMSI_ZONE_5=m]
[,TMSI_ZONE_6=n] [,TMSI_ZONE_7=o]
[,TMSI_ZONE_8=p] [,BCAST_IDX=q] [,SOFT_SLOPE=r]
[,ADD_INT=s] [,DROP_INT=t] [,NGBR_SET=u]
[,ACCESS_HO=v] [,HO_MSG_RSP=w] [,ACC_PRB_HO=x] [,PRB_HO_OT=y] ;
• Input CHG-EXT1-SYS :BSC=0 ,BTS=0 ,SECT=ALPHA ,CDMACH=0 ,
PREF_MSID=IMSI;
• Output