User's Manual Part 2

STAREX-IS BSM Manual
Page:260(877)
Issue:1.
0
SMD-011-PMA210
4.3.4.8. EXTENDED SYSTEM PARAMETER(2) Change
To change the Extended System Parameter Message, click CDM->
Change_Parameter_Information_1-> CHG-EXT2-SYS on the Command Window in
order. If the next input window is displayed, then input the value to be changed.
• Command CHG-EXT2-SYS :BSC=a ,BTS=b ,SECT=c ,CDMACH=d
[,IMSI_T_SUPRT=e]
[,P_REV=f] [,MIN_P_REV=g] [,MAX_ALT_SO=h]
[,RESEL_INCL=i] [,EC_THRESH=j]
[,EC_IO_THRESH=k] [,PILOT_REPORT=l]
[,NGBR_SET_INF=m] [,ACC_HO_ORD=n] [,HO_LIST_UPD=o]
[,MAX_PRB_HO=p] [,BRD_GPS_ASS=q] [,QPC_SUPPORT=r] [,NUM_QPCH=s]
[,QPCH_RATE=t] [,QPC_PWR_LEV=u] [,QPC_CCI=v] [,QPC_PWR_CFG=w]
[,SDB_SUPPORT=x] [,MAC_CF_SPRT=y] [,RLGAIN_PICH=z];
• Input CHG-EXT2-SYS :BSC=0 ,BTS=0,SECT=ALPHA ,CDMACH=,IMSI_T_SUPRT=1;
• Output