User's Manual Part 2

STAREX-IS BSM Manual
Page:262(877)
Issue:1.
0
SMD-011-PMA210
4.3.4.9. Neighbor Cell Information Addition
To add the neighbor list, click the CDM->Change_Parameter_Information_1-> ADD-
NGBR-DATA on the Command Window in order. If the next input window is displayed,
then input the values to be changed.
• Command ADD-NGBR-DATA :BSC=a ,BTS=b ,SECT=c ,INDEX=d ,NGBR_CNFG=e
,NGBR_PN=f ,NGBR_SID=g ,NGBR_NID=h ,NGBR_BASE=i ,NGBR_MSC=j
,NGBR_BSC=k ,NGBR_BTS=l ,NGBR_SECT=m ,NGBR_MSC_T=n
,NGBR_BSC_T=o,NGBR_BCON=p ,SRCH_PRIO=q
,FREQ_INCL=r [,NGBR_BAND=s] [,NGBR_FREQ=t]
[,TIME_INCL=u] [,TX_OFFSET=v] [,TX_DURATION=w] [,TX_PERIOD=x]
[,SRCH_SET=y] [,ADD_PICH_REC=z] [,PICH_REC=] [,OTD_PWR=]
[,SRCH_OFFSET=] [,ACC_HO=] [,ACC_HO_ALW=];
• Input ADD-NGBR-DATA :BSC=0 ,BTS=0 ,SECT=ALPHA ,INDEX=0 ,NGBR_CNFG=0
,NGBR_PN=0 ,NGBR_SID=0 ,NGBR_NID=0 ,NGBR_BASE=0 ,NGBR_MSC=0
,NGBR_BSC=0 ,NGBR_BTS=0 ,NGBR_SECT=ALPHA ,NGBR_MSC_T=LG_MSC
,NGBR_BSC_T=LG_BSC,NGBR_BCON=NO ,SRCH_PRIO=LOW
,FREQ_INCL=NO,NGBR_BAND=Mhz_800;
• Output