User's Manual Part 2

STAREX-IS BSM Manual
Page:265(877)
Issue:1.
0
SMD-011-PMA210
4.3.4.12. HOPPING BEACON PARAMETER Change
To change Hopping Beacon Parameter, click CDM->Change_Parameter_Information_1-
> CHG-NGBR-BCON on the Command Window in order.
• Command CHG-NGBR-BCON :BSC=a ,BTS=b ,SECT=c ,CDMACH=d
[,NGBR_SRCH=e]
[,USE_TIMING=f] [,G_TIME_INCL=g] [,G_TX_DURATE=h]
[,G_TX_PERIOD=i] [,SRCH_OFF_INC=j] ;
• Input CHG-NGBR-BCON :BSC=0 ,BTS=0 ,SECT=ALPHA ,CDMACH=0 ,
NGBR_SRCH=255;
• Output
Fig. 4.3-82 Hopping Beacon Parameter Change Display