User's Manual Part 2

STAREX-IS BSM Manual
Page:270(877)
Issue:1.
0
SMD-011-PMA210
4.3.4.16. OCNS Parameter Change
To change OCNS Parameter value, click CDM->Change_ Parameter_Information_1->
CHG-OCNS-PARA on the Command Window in order. If the next input Window is
displayed, then input the value to be changed.
• Command CHG-OCNS-PARA :BSC=a ,BTS=b ,SECT=c ,CDMACH=d
[,OCNS_ENABLE=e]
[,NUM_OCNS_CH=f] [,OCNS_TEST=g] [,OCNS_SO=h];
• Input CHG-OCNS-PARA :BSC=0 ,BTS=0 ,SECT=ALPHA ,
CDMACH=0 ,OCNS_ENABLE=DISABLE,NUM_OCNS_CH=2;
• Output
Fig. 4.3-86 OCNS Parameter Change Display