User's Manual Part 2

STAREX-IS BSM Manual
Page:271(877)
Issue:1.
0
SMD-011-PMA210
4.3.4.17. Power Control Information Change
To change OCNS Parameter value, click CDM->Change_ Parameter_Information_1->
CHG-PWR-PARA on the Command Window in order. If the next input Window is
displayed, then input the value to be changed.
• Command CHG-PWR-PARA :BSC=a ,BTS=b ,SECT=c ,CDMACH=d
[,T_RX_FILTER=e]
[,G_RX_FILTER=f] [,G_TX_FILTER=g] [,GH_TX_FILTER=h]
[,R_TX_PILOT=i] [,FLN_BLK_THSH=j] [,FLN_HO_THSH=k]
[,FLN_GAIN_SCA=l] [,RLN_BLK_THSH=m] [,RLNK_HO_THSH=n]
[,A_TX_MAX=o] [,DELTA_A_TX=p] [,K_LEVEL=q] [,K_SLOPE=r]
[,K_DELTA=s] [,DELTA_T=t] [,P_TX_MAX=u] [,INIT_CALB=v]
[,PRD_CALIB=w] [,BREATH_FLAG=x] [,PWR_EST_FLAG=y]
[,OVPWR_LMT=z] [,FLN_CAP_LMT=] [,RLN_CAP_LMT=];
• Input CHG-PWR-PARA :BSC=0 ,BTS=0 ,SECT=ALPHA ,CDMACH=0,
T_RX_FILTER=255;
• Output