User's Manual Part 2

STAREX-IS BSM Manual

Page:275(877)

Issue:1.

SMD-011-PMA210

4.3.4.20. BTS CALIBRATION Start

To start BTS Calibration, click CDM-> Change_ Parameter_Information->START-

BTS-CALB on the Command Window in order. If the next input window is displayed,

then input the value to be changed.

• Command START-BTS-CALB :BSC=a ,BTS=b [,SECT=c]

[,CDMACH=d] ,METHOD=e ;

• Input START-BTS-CALB :BSC=0 ,BTS=0 ,SECT=ALPHA,METHOD=OVHD ;

• Output

Fig. 4.3-90 BTS Calibration Start Display