User's Manual Part 2

STAREX-IS BSM Manual
Page:276(877)
Issue:1.
0
SMD-011-PMA210
4.3.4.21. BTS Calibration Time Change
To change BTS Calibration time, click CDM-> Change_ Parameter_Information->CHG-
CALB-TIME on the Command Window in order. If the next input window is displayed,
then input the value to be changed.
• Command CHG-CALB-DATA :BSC=a ,BTS=b ,HOUR=c ,MINUTE=d ,INTERVAL=e
,METHOD=f;
• Input CHG-CALB-DATA :BSC=0 ,BTS=0 ,HOUR=1 ,MINUTE=1 ,INTERVAL=1
,METHOD=OVHD;
• Output
Fig. 4.3-91 BTS Calibration Time Change Display