User's Manual Part 2

STAREX-IS BSM Manual
Page:279(877)
Issue:1.
0
SMD-011-PMA210
4.3.4.23. ACCESS PARAMETER Change
To change Access Parameter information, click CDM-> Change_
Parameter_Information->CHG-ACC-PARA on the Command Window in order. If the
next input window is displayed, then input the value to be changed.
• Command CHG-ACC-PARA :BSC=a ,BTS=b ,SECT=c ,CDMACH=d ,PC=e
[,NOM_PWR=f] [,INIT_PWR=g] [,PWR_STEP=h] [,NUM_STEP=i]
[,MAX_CAP_SZ=j] [,PAM_SZ=k] [,PSST_09=l] [,PSST_10=m]
[,PSST_11=n] [,PSST_12=o] [,PSST_13=p] [,PSST_14=q]
[,PSST_15=r] [,MSG_PSST=s] [,REG_PSST=t]
[,PRBE_RAN=u] [,ACC_TMO=v] [,PRBE_BKOF=w] [,BKOF=x]
[,MREQ_SEQ=y] [,MRSP_SEQ=z] [,AUTH=] [,RAND=]
[,NOM_PWR_EXT=];
• Input CHG-ACC-PARA :BSC=0 ,BTS=0,SECT=ALPHA ,CDMACH=0 ,PC=0
,NOM_PWR=7;
• Output