User's Manual Part 2

STAREX-IS BSM Manual
Page:284(877)
Issue:1.
0
SMD-011-PMA210
4.3.4.27. QUICH PAGING CHANNEL Parameter Information Change
To change Quick Paging Channel Parameter information, click CDM-> Change_
Parameter_Information->CHG-QPC-PARA on the Command Window in order. If the
next input window is displayed, then input the value to be changed.
• Command CHG-QPC-PARA :BSC=a ,BTS=b ,SECT=c ,CDMACH=d ,QPCH_ID=e
[,FRAME_DUR=f] [,DATA_RATE=g];
• Input CHG-QPC-PARA :BSC=0 ,BTS=0 ,SECT=ALPHA ,CDMACH=0 ,QPCH_ID=0
,FRAME_DUR=255;
• Output
Fig. 4.3-97 Quick Paging Channel Parameter Information Change Display