User's Manual Part 2

STAREX-IS BSM Manual
Page:285(877)
Issue:1.
0
SMD-011-PMA210
4.3.4.28. HOPPING PILOT BEACON CHANNEL Parameter Information
Change
To change Hopping Pilot Beacon Channel Parameter information, click CDM->
Change_ Parameter_Information->CHG-BCON-PARA on the Command Window in
order. If the next input window is displayed, then input the value to be changed.
• Command CHG-BCON-PARA :BSC=a ,BTS=b ,SECT=c [,PILOT_GAIN=d]
[,NUM_CDMA_CH=e] [,CDMA_FREQ1=f] [,CDMA_FREQ2=g]
[,CDMA_FREQ3=h] [,CDMA_FREQ4=i] [,CDMA_FREQ5=j]
[,CDMA_FREQ6=k] [,CDMA_FREQ7=l] [,CDMA_FREQ8=m]
[,CDMA_FREQ9=n] [,CDMA_FREQ10=o]
[,CDMA_FREQ11=p] [,CDMA_FREQ12=q];
• Input CHG-BCON-PARA :BSC=0 ,BTS=0 ,SECT=ALPHA ,PILOT_GAIN=255;
• Output
Fig. 4.3-98 Hopping Pilot Beacon Channel Parameter Information Change Display