User's Manual Part 2

STAREX-IS BSM Manual
Page:286(877)
Issue:1.
0
SMD-011-PMA210
4.3.4.29. CDMA Channel FA Test Start
To start the CDMA Channel FA test, click CDM-> Change_ Parameter_Information-
>STRT-FA-TEST on the Command Window in order. If the next input window is
displayed, then input the value to be changed.
• Command STRT-FA-TEST :BSC=a ,BTS=b ,FA=c;
• Input STRT-FA-TEST :BSC=0 ,BTS=0 ,FA=0;
• Output
Fig. 4.3-99 CDMA Channel FA Test Start Display
4.3.4.30. Termination of CDMA Channel FA Test
To stop the CDMA Channel FA test, click CDM-> Change_ Parameter_Information-
>STOP-FA-TEST on the Command Window in order. If the next input window is
displayed, then input the value to be changed.
• Command STOP-FA-TEST :BSC=a ,BTS=b ,FA=c;
• Input STOP-FA-TEST :BSC=0,BTS=0 ,FA=0;