User's Manual Part 2

STAREX-IS BSM Manual
Page:288(877)
Issue:1.
0
SMD-011-PMA210
4.3.5. Parameter Information Change Command
(Change_Parameter_Information_2)
This section describes commands that are used to change the parameter information
that is inquired (required). The command to change parameter information cannot be
easily input by the keyboard since input parameter counts are too many. For this
reason, this section will skip the command input in text and demonstrate window input
by mouse. Upon inputting the command, the part in blue is the parameter that the user
can change and the user can change part or entire fields among them. For more
information on parameters for each command, refer to the test procedures.
.
Table 4.3-2 Parameter Information Change Command (2) List
CRN MMC Description
2240 CHG-DORM-DATA Dormant Timer Change
2241 CHG-PKZN-DATA PACKET ZONE DATA Change
2243 CHG-FAC-TIMER FACILITIES MANAGEMENT TIMER Change
2244 CHG-HO-TIMER HANDOFF TIMER Change
2245 CHG-SUP-TIMER BSC SUPPLEMENT SERVICES TIMER Change
2246 CHG-CALL-TIMER BSC CALL PROCESSING TIMER Change
2247 CHG-MOB-TIMER BSC MOBILITY MANAGEMENT TIMER Change
2248 CHG-A89-TIMER A8 A9 INTERFACE TIMER Change
2249 CHG-A37-TIMER A3, A7 INTERFACE TIMER Change
2250 CHG-RS1-FWDP
Forward Link Power Management Information (RS1)
change
2251 CHG-RS1-REVP
Backward (or Reverse) Link Power Management
Information (RS1) change
2255 CHG-RS2-FWDP
Forward Link Power Management Information (RS2)
change
2256 CHG-RS2-REVP
Backward (or Reverse) Link Power Management
Information (RS2) change
2257 CHG-FER-PARA Service Option FER Change
2261 CHG-MAHO-DATA MAHHO DATA change
2262 CHG-LOC-PARA LOCATION PARA information change
2263 CHG-SCH-PARA SCH parameter information change
2265 CHG-PWR1-CTRL POWER CONTROL parameter information (1) change