User's Manual Part 5

STAREX-IS BSM Manual
Page:523(877)
Issue:1.
0
SMD-011-PMA210
4.8.1. Alarm/Fault Display
4.8.1.1. Display Command of Inhibited Alarm Message List
This is the command to display the list of the alarm message whose display is inhibited.
Check the Inhibit status when the alarm to be generated is not generated; if it is not
inhibited, check the Suppress status.
Table 4-4.8-2 The meaning of Input by BSC Number and BTS Number
BSC BTS Meaning
Input Input BTS
Input X BSC
X X CAN
X Input Input Error
*Note) The applying scope of the table above equally applied to the Alarm/Fault
related command.
• Command DIS-INH-ALM:[BSC=a],[BTS=b];
a : BSC Number(0 ~ 11)
b : BTS Number(0 ~ 47)
• Input DIS-INH-ALM:BSC=0;
• Display
Fig. 4.8-1 Display Result of the Display Inhibited Alarm Message List
4.8.1.2. Display Command for the Audible Alarm Status
This command displays the alarm panel status, presently generated alarm status and
inhibition status of the audible alarm.