User's Manual Part 5

STAREX-IS BSM Manual
Page:524(877)
Issue:1.
0
SMD-011-PMA210
• Command DIS_AUD-STS;
• Display
Fig. 4.8-2 Display Result of the Display Command for Audible Alarm Status
4.8.1.3. Display Command for Inhibited Fault Message List
This is the command for the display inhibited fault messages to display their list. If
fault message to be generated were not generated this command would be needed to
check the Inhibit status.
• Command DIS-INH-FLT:[BSC=a],[BTS=b];
a : BSC Number(0 ~ 11)
b : BTS Number(0 ~ 47)
• Input DIS-INH-FLT:BSC=0, BTS=1;
• Display
Fig. 4.8-3 Display Result of the List for the Display Inhibited Fault Message